| Current Path : /proc/2/cwd/proc/2/cwd/usr/share/autoconf/m4sugar/ |
| Current File : //proc/2/cwd/proc/2/cwd/usr/share/autoconf/m4sugar/m4sh.m4 |
# This file is part of Autoconf. -*- Autoconf -*-
# M4 sugar for common shell constructs.
# Requires GNU M4 and M4sugar.
#
# Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301, USA.
#
# As a special exception, the Free Software Foundation gives unlimited
# permission to copy, distribute and modify the configure scripts that
# are the output of Autoconf. You need not follow the terms of the GNU
# General Public License when using or distributing such scripts, even
# though portions of the text of Autoconf appear in them. The GNU
# General Public License (GPL) does govern all other use of the material
# that constitutes the Autoconf program.
#
# Certain portions of the Autoconf source text are designed to be copied
# (in certain cases, depending on the input) into the output of
# Autoconf. We call these the "data" portions. The rest of the Autoconf
# source text consists of comments plus executable code that decides which
# of the data portions to output in any given case. We call these
# comments and executable code the "non-data" portions. Autoconf never
# copies any of the non-data portions into its output.
#
# This special exception to the GPL applies to versions of Autoconf
# released by the Free Software Foundation. When you make and
# distribute a modified version of Autoconf, you may extend this special
# exception to the GPL to apply to your modified version as well, *unless*
# your modified version has the potential to copy into its output some
# of the text that was the non-data portion of the version that you started
# with. (In other words, unless your change moves or copies text from
# the non-data portions to the data portions.) If your modification has
# such potential, you must delete any notice of this special exception
# to the GPL from your modified version.
#
# Written by Akim Demaille, Pavel Roskin, Alexandre Oliva, Lars J. Aas
# and many other people.
# We heavily use m4's diversions both for the initializations and for
# required macros, because in both cases we have to issue soon in
# output something which is discovered late.
#
#
# KILL is only used to suppress output.
#
# - BINSH
# AC_REQUIRE'd #! /bin/sh line
# - HEADER-REVISION
# RCS keywords etc.
# - HEADER-COMMENT
# Purpose of the script etc.
# - HEADER-COPYRIGHT
# Copyright notice(s)
# - M4SH-SANITIZE
# M4sh's shell setup
# - M4SH-INIT
# M4sh initialization
# - BODY
# The body of the script.
# _m4_divert(DIVERSION-NAME)
# --------------------------
# Convert a diversion name into its number. Otherwise, return
# DIVERSION-NAME which is supposed to be an actual diversion number.
# Of course it would be nicer to use m4_case here, instead of zillions
# of little macros, but it then takes twice longer to run `autoconf'!
m4_define([_m4_divert(BINSH)], 0)
m4_define([_m4_divert(HEADER-REVISION)], 1)
m4_define([_m4_divert(HEADER-COMMENT)], 2)
m4_define([_m4_divert(HEADER-COPYRIGHT)], 3)
m4_define([_m4_divert(M4SH-SANITIZE)], 4)
m4_define([_m4_divert(M4SH-INIT)], 5)
m4_define([_m4_divert(BODY)], 1000)
# Aaarg. Yet it starts with compatibility issues... Libtool wants to
# use NOTICE to insert its own LIBTOOL-INIT stuff. People should ask
# before diving into our internals :(
m4_copy([_m4_divert(M4SH-INIT)], [_m4_divert(NOTICE)])
## ------------------------- ##
## 1. Sanitizing the shell. ##
## ------------------------- ##
# AS_REQUIRE(NAME-TO-CHECK, [BODY-TO-EXPAND = NAME-TO-CHECK])
# -----------------------------------------------------------
# BODY-TO-EXPAND is some initialization which must be expanded in the
# M4SH-INIT section when expanded (required or not). This is very
# different from m4_require. For instance:
#
# m4_defun([_FOO_PREPARE], [foo=foo])
# m4_defun([FOO],
# [m4_require([_FOO_PREPARE])dnl
# echo $foo])
#
# m4_defun([_BAR_PREPARE], [bar=bar])
# m4_defun([BAR],
# [AS_REQUIRE([_BAR_PREPARE])dnl
# echo $bar])
#
# AS_INIT
# foo1=`FOO`
# foo2=`FOO`
# bar1=`BAR`
# bar2=`BAR`
#
# gives
#
# #! /bin/sh
# bar=bar
#
# foo1=`foo=foo
# echo $foo`
# foo2=`echo $foo`
# bar1=`echo $bar`
# bar2=`echo $bar`
#
# Due to the simple implementation, all the AS_REQUIRE calls have to be at
# the very beginning of the macro body, or the AS_REQUIREs may not be nested.
# More exactly, if a macro doesn't have all AS_REQUIREs at its beginning,
# it may not be AS_REQUIREd.
#
m4_define([AS_REQUIRE],
[m4_provide_if([$1], [],
[m4_divert_text([M4SH-INIT], [m4_default([$2], [$1])])])])
# AS_REQUIRE_SHELL_FN(NAME-TO-CHECK, BODY-TO-EXPAND)
# --------------------------------------------------
# BODY-TO-EXPAND is the body of a shell function to be emitted in the
# M4SH-INIT section when expanded (required or not). Unlike other
# xx_REQUIRE macros, BODY-TO-EXPAND is mandatory.
#
m4_define([AS_REQUIRE_SHELL_FN],
[_AS_DETECT_REQUIRED([_AS_SHELL_FN_WORK])dnl
m4_provide_if([AS_SHELL_FN_$1], [],
[m4_provide([AS_SHELL_FN_$1])m4_divert_text([M4SH-INIT], [$1() {
$2
}])])])
# AS_BOURNE_COMPATIBLE
# --------------------
# Try to be as Bourne and/or POSIX as possible.
#
# This does not set BIN_SH, due to the problems described in
# <http://lists.gnu.org/archive/html/autoconf-patches/2006-03/msg00081.html>.
# People who need BIN_SH should set it in their environment before invoking
# configure; apparently this would include UnixWare, as described in
# <http://lists.gnu.org/archive/html/bug-autoconf/2006-06/msg00025.html>.
m4_define([AS_BOURNE_COMPATIBLE],
[# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
_$0
])
# _AS_BOURNE_COMPATIBLE
# ---------------------
# This is the part of AS_BOURNE_COMPATIBLE which has to be repeated inside
# each instance.
m4_define([_AS_BOURNE_COMPATIBLE],
[AS_IF([test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1],
[emulate sh
NULLCMD=:
[#] Pre-4.2 versions of Zsh do word splitting on ${1+"$[@]"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$[@]"}'='"$[@]"'
setopt NO_GLOB_SUBST],
[AS_CASE([`(set -o) 2>/dev/null`], [*posix*], [set -o posix])])
])
# _AS_RUN(TEST, [SHELL])
# ----------------------
# Run TEST under the current shell (if one parameter is used)
# or under the given SHELL, protecting it from syntax errors.
m4_define([_AS_RUN],
[m4_ifval([$2],
[{ $2 <<\_ASEOF
_AS_BOURNE_COMPATIBLE
$1
_ASEOF
}],
[(eval "AS_ESCAPE(m4_expand([$1]))")])])
# _AS_DETECT_REQUIRED(TEST)
# -------------------------
# Refuse to execute under a shell that does not pass the given TEST.
m4_define([_AS_DETECT_REQUIRED_BODY], [:])
m4_defun([_AS_DETECT_REQUIRED],
[m4_require([_AS_DETECT_BETTER_SHELL])dnl
m4_expand_once([m4_append([_AS_DETECT_REQUIRED_BODY], [
($1) || AS_EXIT(1)
])], [_AS_DETECT_REQUIRED_provide($1)])])
# _AS_DETECT_SUGGESTED(TEST)
# --------------------------
# Prefer to execute under a shell that passes the given TEST.
m4_define([_AS_DETECT_SUGGESTED_BODY], [:])
m4_defun([_AS_DETECT_SUGGESTED],
[m4_require([_AS_DETECT_BETTER_SHELL])dnl
m4_expand_once([m4_append([_AS_DETECT_SUGGESTED_BODY], [
($1) || AS_EXIT(1)
])], [_AS_DETECT_SUGGESTED_provide($1)])])
# _AS_DETECT_BETTER_SHELL
# -----------------------
# The real workhorse for detecting a shell with the correct
# features.
#
# In previous versions, we prepended /usr/posix/bin to the path, but that
# caused a regression on OpenServer 6.0.0
# <http://lists.gnu.org/archive/html/bug-autoconf/2006-06/msg00017.html>
# and on HP-UX 11.11, see the failure of test 120 in
# <http://lists.gnu.org/archive/html/bug-autoconf/2006-10/msg00003.html>
#
# FIXME: The code should test for the OSF bug described in
# <http://lists.gnu.org/archive/html/autoconf-patches/2006-03/msg00081.html>.
#
m4_defun_once([_AS_DETECT_BETTER_SHELL],
[m4_append([_AS_CLEANUP], [m4_divert_text([M4SH-SANITIZE], [
AS_REQUIRE([_AS_UNSET_PREPARE])dnl
if test "x$CONFIG_SHELL" = x; then
AS_IF([_AS_RUN([_AS_DETECT_REQUIRED_BODY]) 2>/dev/null],
[as_have_required=yes],
[as_have_required=no])
AS_IF([test $as_have_required = yes &&dnl
_AS_RUN([_AS_DETECT_SUGGESTED_BODY]) 2> /dev/null],
[],
[as_candidate_shells=
_AS_PATH_WALK([/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH],
[case $as_dir in
/*)
for as_base in sh bash ksh sh5; do
as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
done;;
esac])
for as_shell in $as_candidate_shells $SHELL; do
# Try only shells that exist, to save several forks.
AS_IF([{ test -f "$as_shell" || test -f "$as_shell.exe"; } &&
_AS_RUN([_AS_DETECT_REQUIRED_BODY],
[("$as_shell") 2> /dev/null])],
[CONFIG_SHELL=$as_shell
as_have_required=yes
AS_IF([_AS_RUN([_AS_DETECT_SUGGESTED_BODY], ["$as_shell" 2> /dev/null])],
[break])])
done
AS_IF([test "x$CONFIG_SHELL" != x],
[for as_var in BASH_ENV ENV
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$as_myself" ${1+"$[@]"}])
AS_IF([test $as_have_required = no],
[echo This script requires a shell more modern than all the
echo shells that I found on your system. Please install a
echo modern shell, or manually run the script under such a
echo shell if you do have one.
AS_EXIT(1)])
])
fi
])])])# _AS_DETECT_BETTER_SHELL
# _AS_SHELL_FN_WORK
# -----------------
# This is a spy to detect "in the wild" shells that do not support shell
# functions correctly. It is based on the m4sh.at Autotest testcases.
m4_define([_AS_SHELL_FN_WORK],
[as_func_return () {
(exit [$]1)
}
as_func_success () {
as_func_return 0
}
as_func_failure () {
as_func_return 1
}
as_func_ret_success () {
return 0
}
as_func_ret_failure () {
return 1
}
exitcode=0
AS_IF([as_func_success], [],
[exitcode=1
echo as_func_success failed.])
AS_IF([as_func_failure],
[exitcode=1
echo as_func_failure succeeded.])
AS_IF([as_func_ret_success], [],
[exitcode=1
echo as_func_ret_success failed.])
AS_IF([as_func_ret_failure],
[exitcode=1
echo as_func_ret_failure succeeded.])
AS_IF([( set x; as_func_ret_success y && test x = "[$]1" )], [],
[exitcode=1
echo positional parameters were not saved.])
test $exitcode = 0[]dnl
])# _AS_SHELL_FN_WORK
# AS_COPYRIGHT(TEXT)
# ------------------
# Emit TEXT, a copyright notice, as a shell comment near the top of the
# script. TEXT is evaluated once; to accomplish that, we do not prepend
# `# ' but `@%:@ '.
m4_define([AS_COPYRIGHT],
[m4_divert_text([HEADER-COPYRIGHT],
[m4_bpatsubst([
$1], [^], [@%:@ ])])])
# AS_SHELL_SANITIZE
# -----------------
m4_defun([AS_SHELL_SANITIZE],
[## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
AS_BOURNE_COMPATIBLE
# PATH needs CR
_AS_CR_PREPARE
_AS_ECHO_PREPARE
_AS_PATH_SEPARATOR_PREPARE
_AS_UNSET_PREPARE
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
case $[0] in
*[[\\/]]* ) as_myself=$[0] ;;
*) _AS_PATH_WALK([],
[test -r "$as_dir/$[0]" && as_myself=$as_dir/$[0] && break])
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$[0]
fi
if test ! -f "$as_myself"; then
AS_ECHO(["$as_myself: error: cannot find myself; rerun with an absolute file name"]) >&2
AS_EXIT
fi
# Work around bugs in pre-3.0 UWIN ksh.
for as_var in ENV MAIL MAILPATH
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE
# Required to use basename.
_AS_EXPR_PREPARE
_AS_BASENAME_PREPARE
# Name of the executable.
as_me=`AS_BASENAME("$[0]")`
# CDPATH.
$as_unset CDPATH
])# AS_SHELL_SANITIZE
# _AS_PREPARE
# -----------
# This macro has a very special status. Normal use of M4sh relies
# heavily on AS_REQUIRE, so that needed initializations (such as
# _AS_TEST_PREPARE) are performed on need, not on demand. But
# Autoconf is the first client of M4sh, and for two reasons: configure
# and config.status. Relying on AS_REQUIRE is of course fine for
# configure, but fails for config.status (which is created by
# configure). So we need a means to force the inclusion of the
# various _AS_PREPARE_* on top of config.status. That's basically why
# there are so many _AS_PREPARE_* below, and that's also why it is
# important not to forget some: config.status needs them.
m4_defun([_AS_PREPARE],
[_AS_LINENO_PREPARE
_AS_DIRNAME_PREPARE
_AS_ECHO_N_PREPARE[]dnl We do not need this ourselves but user code might.
_AS_EXPR_PREPARE
_AS_LN_S_PREPARE
_AS_MKDIR_P_PREPARE
_AS_TEST_PREPARE
_AS_TR_CPP_PREPARE
_AS_TR_SH_PREPARE
])
# AS_PREPARE
# ----------
# Output all the M4sh possible initialization into the initialization
# diversion.
m4_defun([AS_PREPARE],
[m4_divert_text([M4SH-INIT], [_AS_PREPARE])])
## ----------------------------- ##
## 2. Wrappers around builtins. ##
## ----------------------------- ##
# This section is lexicographically sorted.
# AS_CASE(WORD, [PATTERN1], [IF-MATCHED1]...[DEFAULT])
# ----------------------------------------------------
# Expand into
# | case WORD in
# | PATTERN1) IF-MATCHED1 ;;
# | ...
# | *) DEFAULT ;;
# | esac
m4_define([_AS_CASE],
[ $1[)] m4_default([$2], [:]) ;;
])
m4_define([_AS_CASE_DEFAULT],
[ *[)] $1 ;;
])
m4_defun([AS_CASE],
[m4_ifval([$2$3],
[case $1 in
m4_transform_pair([_$0], [_$0_DEFAULT], m4_shift($@))dnl
esac
])dnl
])# AS_CASE
# AS_EXIT([EXIT-CODE = 1])
# ------------------------
# Exit and set exit code to EXIT-CODE in the way that it's seen
# within "trap 0".
#
# We cannot simply use "exit N" because some shells (zsh and Solaris sh)
# will not set $? to N while running the code set by "trap 0"
# So we set $? by executing "exit N" in the subshell and then exit.
# Other shells don't use `$?' as default for `exit', hence just repeating
# the exit value can only help improving portability.
m4_define([AS_EXIT],
[{ (exit m4_default([$1], 1)); exit m4_default([$1], 1); }])
# AS_IF(TEST1, [IF-TRUE1]...[IF-FALSE])
# -------------------------------------
# Expand into
# | if TEST1; then
# | IF-TRUE1
# | elif TEST2; then
# | IF-TRUE2
# [...]
# | else
# | IF-FALSE
# | fi
# with simplifications if IF-TRUE1 and/or IF-FALSE is empty.
#
m4_define([_AS_IF],
[elif $1; then
m4_default([$2], [:])
])
m4_define([_AS_IF_ELSE],
[m4_ifvaln([$1],
[else
$1])])
m4_defun([AS_IF],
[m4_ifval([$2$3],
[if $1; then
m4_default([$2], [:])
m4_transform_pair([_$0], [_$0_ELSE], m4_shift2($@))dnl
fi
])dnl
])# AS_IF
# _AS_UNSET_PREPARE
# -----------------
# AS_UNSET depends upon $as_unset: compute it.
# Use MAIL to trigger a bug in Bash 2.01;
# the "|| exit" suppresses the resulting "Segmentation fault" message.
# Avoid 'if ((', as that triggers a bug in pdksh 5.2.14.
m4_defun([_AS_UNSET_PREPARE],
[# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
as_unset=unset
else
as_unset=false
fi
])
# AS_UNSET(VAR, [VALUE-IF-UNSET-NOT-SUPPORTED = `'])
# --------------------------------------------------
# Try to unset the env VAR, otherwise set it to
# VALUE-IF-UNSET-NOT-SUPPORTED. `as_unset' must have been computed.
m4_defun([AS_UNSET],
[AS_REQUIRE([_AS_UNSET_PREPARE])dnl
$as_unset $1 || test "${$1+set}" != set || { $1=$2; export $1; }])
## ------------------------------------------ ##
## 3. Error and warnings at the shell level. ##
## ------------------------------------------ ##
# If AS_MESSAGE_LOG_FD is defined, shell messages are duplicated there
# too.
# AS_ESCAPE(STRING, [CHARS = $"`\])
# ---------------------------------
# Escape the CHARS in STRING.
#
# Avoid the m4_bpatsubst if there are no interesting characters to escape.
# _AS_ESCAPE bypasses argument defaulting.
m4_define([AS_ESCAPE],
[_$0([$1], m4_default([$2], [\"$`]))])
m4_define([_AS_ESCAPE],
[m4_if(m4_len([$1]),
m4_len(m4_translit([[$1]], [$2])),
[$1], [m4_bpatsubst([$1], [[$2]], [\\\&])])])
# _AS_QUOTE_IFELSE(STRING, IF-MODERN-QUOTATION, IF-OLD-QUOTATION)
# ---------------------------------------------------------------
# Compatibility glue between the old AS_MSG suite which did not
# quote anything, and the modern suite which quotes the quotes.
# If STRING contains `\\' or `\$', it's modern.
# If STRING contains `\"' or `\`', it's old.
# Otherwise it's modern.
#
# Profiling shows that m4_index is 5 to 8x faster than m4_bregexp. The
# slower implementation used:
# m4_bmatch([$1],
# [\\[\\$]], [$2],
# [\\[`"]], [$3],
# [$2])
# The current implementation caters to the common case of no backslashes,
# to minimize m4_index expansions (hence the nested if).
m4_define([_AS_QUOTE_IFELSE],
[m4_cond([m4_index([$1], [\])], [-1], [$2],
[m4_eval(m4_index([$1], [\\]) >= 0)], [1], [$2],
[m4_eval(m4_index([$1], [\$]) >= 0)], [1], [$2],
[m4_eval(m4_index([$1], [\`]) >= 0)], [1], [$3],
[m4_eval(m4_index([$1], [\"]) >= 0)], [1], [$3],
[$2])])
# _AS_QUOTE(STRING, [CHARS = `"])
# -------------------------------
# If there are quoted (via backslash) backquotes do nothing, else
# backslash all the quotes.
m4_define([_AS_QUOTE],
[_AS_QUOTE_IFELSE([$1],
[_AS_ESCAPE([$1], m4_default([$2], [`""]))],
[m4_warn([obsolete],
[back quotes and double quotes must not be escaped in: $1])dnl
$1])])
# _AS_ECHO_UNQUOTED(STRING, [FD = AS_MESSAGE_FD])
# -----------------------------------------------
# Perform shell expansions on STRING and echo the string to FD.
m4_define([_AS_ECHO_UNQUOTED],
[AS_ECHO(["$1"]) >&m4_default([$2], [AS_MESSAGE_FD])])
# _AS_ECHO(STRING, [FD = AS_MESSAGE_FD])
# --------------------------------------
# Protect STRING from backquote expansion, echo the result to FD.
m4_define([_AS_ECHO],
[_AS_ECHO_UNQUOTED([_AS_QUOTE([$1])], [$2])])
# _AS_ECHO_LOG(STRING)
# --------------------
# Log the string to AS_MESSAGE_LOG_FD.
m4_define([_AS_ECHO_LOG],
[_AS_ECHO([$as_me:$LINENO: $1], [AS_MESSAGE_LOG_FD])])
# _AS_ECHO_N_PREPARE
# ------------------
# Check whether to use -n, \c, or newline-tab to separate
# checking messages from result messages.
# Don't try to cache, since the results of this macro are needed to
# display the checking message. In addition, caching something used once
# has little interest.
# Idea borrowed from dist 3.0. Use `*c*,', not `*c,' because if `\c'
# failed there is also a newline to match.
m4_defun([_AS_ECHO_N_PREPARE],
[ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in
-n*)
case `echo 'x\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
*) ECHO_C='\c';;
esac;;
*)
ECHO_N='-n';;
esac
])# _AS_ECHO_N_PREPARE
# _AS_ECHO_N(STRING, [FD = AS_MESSAGE_FD])
# ----------------------------------------
# Same as _AS_ECHO, but echo doesn't return to a new line.
m4_define([_AS_ECHO_N],
[AS_ECHO_N(["_AS_QUOTE([$1])"]) >&m4_default([$2], [AS_MESSAGE_FD])])
# AS_MESSAGE(STRING, [FD = AS_MESSAGE_FD])
# ----------------------------------------
m4_define([AS_MESSAGE],
[m4_ifset([AS_MESSAGE_LOG_FD],
[{ _AS_ECHO_LOG([$1])
_AS_ECHO([$as_me: $1], [$2]);}],
[_AS_ECHO([$as_me: $1], [$2])])[]dnl
])
# AS_WARN(PROBLEM)
# ----------------
m4_define([AS_WARN],
[AS_MESSAGE([WARNING: $1], [2])])# AS_WARN
# AS_ERROR(ERROR, [EXIT-STATUS = 1])
# ----------------------------------
m4_define([AS_ERROR],
[{ AS_MESSAGE([error: $1], [2])
AS_EXIT([$2]); }[]dnl
])# AS_ERROR
## -------------------------------------- ##
## 4. Portable versions of common tools. ##
## -------------------------------------- ##
# This section is lexicographically sorted.
# AS_BASENAME(FILE-NAME)
# ----------------------
# Simulate the command 'basename FILE-NAME'. Not all systems have basename.
# Also see the comments for AS_DIRNAME.
m4_defun([_AS_BASENAME_EXPR],
[AS_REQUIRE([_AS_EXPR_PREPARE])dnl
$as_expr X/[]$1 : '.*/\([[^/][^/]*]\)/*$' \| \
X[]$1 : 'X\(//\)$' \| \
X[]$1 : 'X\(/\)' \| .])
m4_defun([_AS_BASENAME_SED],
[AS_ECHO([X/[]$1]) |
sed ['/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q']])
m4_defun([AS_BASENAME],
[AS_REQUIRE([_$0_PREPARE])dnl
$as_basename -- $1 ||
_AS_BASENAME_EXPR([$1]) 2>/dev/null ||
_AS_BASENAME_SED([$1])])
# _AS_BASENAME_PREPARE
# --------------------
# Avoid Solaris 9 /usr/ucb/basename, as `basename /' outputs an empty line.
# Also, traditional basename mishandles --.
m4_defun([_AS_BASENAME_PREPARE],
[if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
])# _AS_BASENAME_PREPARE
# AS_DIRNAME(FILE-NAME)
# ---------------------
# Simulate the command 'dirname FILE-NAME'. Not all systems have dirname.
# This macro must be usable from inside ` `.
#
# Prefer expr to echo|sed, since expr is usually faster and it handles
# backslashes and newlines correctly. However, older expr
# implementations (e.g. SunOS 4 expr and Solaris 8 /usr/ucb/expr) have
# a silly length limit that causes expr to fail if the matched
# substring is longer than 120 bytes. So fall back on echo|sed if
# expr fails.
m4_defun([_AS_DIRNAME_EXPR],
[AS_REQUIRE([_AS_EXPR_PREPARE])dnl
$as_expr X[]$1 : 'X\(.*[[^/]]\)//*[[^/][^/]]*/*$' \| \
X[]$1 : 'X\(//\)[[^/]]' \| \
X[]$1 : 'X\(//\)$' \| \
X[]$1 : 'X\(/\)' \| .])
m4_defun([_AS_DIRNAME_SED],
[AS_ECHO([X[]$1]) |
sed ['/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q']])
m4_defun([AS_DIRNAME],
[AS_REQUIRE([_$0_PREPARE])dnl
$as_dirname -- $1 ||
_AS_DIRNAME_EXPR([$1]) 2>/dev/null ||
_AS_DIRNAME_SED([$1])])
# _AS_DIRNAME_PREPARE
# --------------------
m4_defun([_AS_DIRNAME_PREPARE],
[if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
])# _AS_DIRNAME_PREPARE
# AS_ECHO(WORD)
# -------------
# Output WORD followed by a newline. WORD must be a single shell word
# (typically a quoted string). The bytes of WORD are output as-is, even
# if it starts with "-" or contains "\".
m4_defun([AS_ECHO],
[AS_REQUIRE([_$0_PREPARE])dnl
$as_echo $1])
# AS_ECHO_N(WORD)
# -------------
# Like AS_ECHO(WORD), except do not output the trailing newline.
m4_defun([AS_ECHO_N],
[AS_REQUIRE([_AS_ECHO_PREPARE])dnl
$as_echo_n $1])
# _AS_ECHO_PREPARE
# -----------------
# Arrange for $as_echo 'FOO' to echo FOO without escape-interpretation;
# and similarly for $as_echo_foo, which omits the trailing newline.
# 'FOO' is an optional single argument; a missing FOO is treated as empty.
m4_defun([_AS_ECHO_PREPARE],
[[as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
as_echo_body='eval /usr/ucb/echo -n "$][1$as_nl"'
as_echo_n='/usr/ucb/echo -n'
else
as_echo_body='eval expr "X$][1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$][1;
case $arg in
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
esac;
expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
'
export as_echo_n_body
as_echo_n='sh -c $as_echo_n_body as_echo'
fi
export as_echo_body
as_echo='sh -c $as_echo_body as_echo'
fi
]])# _AS_ECHO_PREPARE
# AS_TEST_X
# ---------
# Check whether a file has executable or search permissions.
m4_defun([AS_TEST_X],
[AS_REQUIRE([_AS_TEST_PREPARE])dnl
$as_test_x $1[]dnl
])# AS_TEST_X
# AS_EXECUTABLE_P
# ---------------
# Check whether a file is a regular file that has executable permissions.
m4_defun([AS_EXECUTABLE_P],
[AS_REQUIRE([_AS_TEST_PREPARE])dnl
{ test -f $1 && AS_TEST_X([$1]); }dnl
])# AS_EXECUTABLE_P
# _AS_EXPR_PREPARE
# ----------------
# QNX 4.25 expr computes and issue the right result but exits with failure.
# Tru64 expr mishandles leading zeros in numeric strings.
# Detect these flaws.
m4_defun([_AS_EXPR_PREPARE],
[if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
])# _AS_EXPR_PREPARE
# _AS_LINENO_WORKS
# ---------------
# Succeed if the currently executing shell supports LINENO.
# This macro does not expand to a single shell command, so be careful
# when using it. Surrounding the body of this macro with {} would
# cause "bash -c '_ASLINENO_WORKS'" to fail (with Bash 2.05, anyway),
# but that bug is irrelevant to our use of LINENO.
m4_define([_AS_LINENO_WORKS],
[
as_lineno_1=$LINENO
as_lineno_2=$LINENO
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2"])
# _AS_LINENO_PREPARE
# ------------------
# If LINENO is not supported by the shell, produce a version of this
# script where LINENO is hard coded.
# Comparing LINENO against _oline_ is not a good solution, since in
# the case of embedded executables (such as config.status within
# configure) you'd compare LINENO wrt config.status vs. _oline_ wrt
# configure.
m4_define([_AS_LINENO_PREPARE],
[AS_REQUIRE([_AS_CR_PREPARE])dnl
_AS_DETECT_SUGGESTED([_AS_LINENO_WORKS])
_AS_LINENO_WORKS || {
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
# line-number line after each line using $LINENO; the second 'sed'
# does the real work. The second script uses 'N' to pair each
# line-number line with the line containing $LINENO, and appends
# trailing '-' during substitution so that $LINENO is not a special
# case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
# scripts with optimization help from Paolo Bonzini. Blame Lee
# E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[[$]]LINENO/=
' <$as_myself |
sed '
s/[[$]]LINENO.*/&-/
t lineno
b
:lineno
N
:loop
s/[[$]]LINENO\([[^'$as_cr_alnum'_]].*\n\)\(.*\)/\2\1\2/
t loop
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
AS_ERROR([cannot create $as_me.lineno; rerun with a POSIX shell])
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
. "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
])# _AS_LINENO_PREPARE
# _AS_LN_S_PREPARE
# ----------------
# Don't use conftest.sym to avoid file name issues on DJGPP, where this
# would yield conftest.sym.exe for DJGPP < 2.04. And don't use `conftest'
# as base name to avoid prohibiting concurrency (e.g., concurrent
# config.statuses). On read-only media, assume 'cp -p' and hope we
# are just running --help anyway.
m4_defun([_AS_LN_S_PREPARE],
[rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -p'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
else
as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
])# _AS_LN_S_PREPARE
# AS_LN_S(FILE, LINK)
# -------------------
# FIXME: Should we add the glue code to handle properly relative symlinks
# simulated with `ln' or `cp'?
m4_defun([AS_LN_S],
[AS_REQUIRE([_AS_LN_S_PREPARE])dnl
$as_ln_s $1 $2
])
# AS_MKDIR_P(DIR)
# ---------------
# Emulate `mkdir -p' with plain `mkdir'.
m4_define([AS_MKDIR_P],
[AS_REQUIRE([_$0_PREPARE])dnl
{ as_dir=$1
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`AS_ECHO(["$as_dir"]) | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`AS_DIRNAME("$as_dir")`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || AS_ERROR([cannot create directory $as_dir]); }dnl
])# AS_MKDIR_P
# _AS_MKDIR_P_PREPARE
# -------------------
m4_defun([_AS_MKDIR_P_PREPARE],
[if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
])# _AS_MKDIR_P_PREPARE
# _AS_PATH_SEPARATOR_PREPARE
# --------------------------
# Compute the path separator.
m4_defun([_AS_PATH_SEPARATOR_PREPARE],
[# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
])# _AS_PATH_SEPARATOR_PREPARE
# _AS_PATH_WALK([PATH = $PATH], BODY)
# -----------------------------------
# Walk through PATH running BODY for each `as_dir'.
#
# Still very private as its interface looks quite bad.
#
# `$as_dummy' forces splitting on constant user-supplied paths.
# POSIX.2 field splitting is done only on the result of word
# expansions, not on literal text. This closes a longstanding sh security
# hole. Optimize it away when not needed, i.e., if there are no literal
# path separators.
m4_define([_AS_PATH_WALK],
[AS_REQUIRE([_AS_PATH_SEPARATOR_PREPARE])dnl
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
m4_bmatch([$1], [[:;]],
[as_dummy="$1"
for as_dir in $as_dummy],
[for as_dir in m4_default([$1], [$PATH])])
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
$2
done
IFS=$as_save_IFS
])
# AS_SET_CATFILE(VAR, DIR-NAME, FILE-NAME)
# ----------------------------------------
# Set VAR to DIR-NAME/FILE-NAME.
# Optimize the common case where $2 or $3 is '.'.
m4_define([AS_SET_CATFILE],
[case $2 in
.) $1=$3;;
*)
case $3 in
.) $1=$2;;
[[\\/]]* | ?:[[\\/]]* ) $1=$3;;
*) $1=$2/$3;;
esac;;
esac[]dnl
])# AS_SET_CATFILE
# _AS_TEST_PREPARE
# ----------------
# Find out whether `test -x' works. If not, prepare a substitute
# that should work well enough for most scripts.
#
# Here are some of the problems with the substitute.
# The 'ls' tests whether the owner, not the current user, can execute/search.
# The eval means '*', '?', and '[' cause inadvertent file name globbing
# after the 'eval', so jam together as many tokens as we can to minimize
# the likelihood that the inadvertent globbing will actually do anything.
# Luckily, this gorp is needed only on really ancient hosts.
#
m4_defun([_AS_TEST_PREPARE],
[if test -x / >/dev/null 2>&1; then
as_test_x='test -x'
else
if ls -dL / >/dev/null 2>&1; then
as_ls_L_option=L
else
as_ls_L_option=
fi
as_test_x='
eval sh -c '\''
if test -d "$[]1"; then
test -d "$[]1/.";
else
case $[]1 in
-*)set "./$[]1";;
esac;
case `ls -ld'$as_ls_L_option' "$[]1" 2>/dev/null` in
???[[sx]]*):;;*)false;;esac;fi
'\'' sh
'
fi
dnl as_executable_p is present for backward compatibility with Libtool
dnl 1.5.22, but it should go away at some point.
as_executable_p=$as_test_x
])# _AS_TEST_PREPARE
## ------------------ ##
## 5. Common idioms. ##
## ------------------ ##
# This section is lexicographically sorted.
# AS_BOX(MESSAGE, [FRAME-CHARACTER = `-'])
# ----------------------------------------
# Output MESSAGE, a single line text, framed with FRAME-CHARACTER (which
# must not be `/').
m4_define([AS_BOX],
[AS_LITERAL_IF([$1],
[_AS_BOX_LITERAL($@)],
[_AS_BOX_INDIR($@)])])
# _AS_BOX_LITERAL(MESSAGE, [FRAME-CHARACTER = `-'])
# -------------------------------------------------
m4_define([_AS_BOX_LITERAL],
[cat <<\_ASBOX
m4_text_box($@)
_ASBOX])
# _AS_BOX_INDIR(MESSAGE, [FRAME-CHARACTER = `-'])
# -----------------------------------------------
m4_define([_AS_BOX_INDIR],
[sed 'h;s/./m4_default([$2], [-])/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX
@%:@@%:@ $1 @%:@@%:@
_ASBOX])
# AS_HELP_STRING(LHS, RHS, [INDENT-COLUMN = 26], [WRAP-COLUMN = 79])
# ------------------------------------------------------------------
#
# Format a help string so that it looks pretty when the user executes
# "script --help". This macro takes up to four arguments, a
# "left hand side" (LHS), a "right hand side" (RHS), a decimal
# INDENT-COLUMN which is the column where wrapped lines should begin
# (the default of 26 is recommended), and a decimal WRAP-COLUMN which is
# the column where lines should wrap (the default of 79 is recommended).
# LHS is expanded, RHS is not.
#
# For backwards compatibility not documented in the manual, INDENT-COLUMN
# can also be specified as a string of white spaces, whose width
# determines the indentation column. Using TABs in INDENT-COLUMN is not
# recommended, since screen width of TAB is not computed.
#
# The resulting string is suitable for use in other macros that require
# a help string (e.g. AC_ARG_WITH).
#
# Here is the sample string from the Autoconf manual (Node: External
# Software) which shows the proper spacing for help strings.
#
# --with-readline support fancy command line editing
# ^ ^ ^
# | | |
# | column 2 column 26
# |
# column 0
#
# A help string is made up of a "left hand side" (LHS) and a "right
# hand side" (RHS). In the example above, the LHS is
# "--with-readline", while the RHS is "support fancy command line
# editing".
#
# If the LHS contains more than (INDENT-COLUMN - 3) characters, then the
# LHS is terminated with a newline so that the RHS starts on a line of its
# own beginning at INDENT-COLUMN. In the default case, this corresponds to an
# LHS with more than 23 characters.
#
# Therefore, in the example, if the LHS were instead
# "--with-readline-blah-blah-blah", then the AS_HELP_STRING macro would
# expand into:
#
#
# --with-readline-blah-blah-blah
# ^ ^ support fancy command line editing
# | | ^
# | column 2 |
# column 0 column 26
#
#
# m4_text_wrap hacks^Wworks around the fact that m4_format does not
# know quadrigraphs.
#
m4_define([AS_HELP_STRING],
[m4_text_wrap([$2], m4_cond([[$3]], [], [ ],
[m4_eval([$3]+0)], [0], [[$3]],
[m4_format([[%*s]], [$3], [])]),
m4_expand([ $1 ]), [$4])dnl
])# AS_HELP_STRING
# AS_IDENTIFIER_IF(EXPRESSION, IF-IDENT, IF-NOT-IDENT)
# ----------------------------------------------------
# If EXPRESSION serves as an identifier (ie, after removal of @&t@, it
# matches the regex `^[a-zA-Z_][a-zA-Z_0-9]*$'), execute IF-IDENT,
# otherwise IF-NOT-IDENT.
#
# This is generally faster than the alternative:
# m4_bmatch(m4_bpatsubst([[$1]], [@&t@]), ^m4_defn([m4_re_word])$,
# [$2], [$3])
#
# Rather than expand m4_defn every time AS_IDENTIFIER_IF is expanded, we
# inline its expansion up front. Only use a regular expression if we
# detect a potential quadrigraph.
#
# First, check if the entire string matches m4_cr_symbol2. Only then do
# we worry if the first character also matches m4_cr_symbol1 (ie. does not
# match m4_cr_digit).
m4_define([AS_IDENTIFIER_IF],
[m4_if(m4_index([$1], [@]), [-1],
[_$0($@)],
[_$0(m4_bpatsubst([[$1]], [@&t@]), [$2], [$3])])])
m4_define([_AS_IDENTIFIER_IF],
[m4_cond([[$1]], [], [$3],
[m4_eval(m4_len(m4_translit([[$1]], ]]dnl
m4_dquote(m4_dquote(m4_defn([m4_cr_symbols2])))[[)) > 0)], [1], [$3],
[m4_len(m4_translit(m4_format([[%.1s]], [$1]), ]]dnl
m4_dquote(m4_dquote(m4_defn([m4_cr_symbols1])))[[))], [0], [$2], [$3])])
# AS_LITERAL_IF(EXPRESSION, IF-LITERAL, IF-NOT-LITERAL)
# -----------------------------------------------------
# If EXPRESSION has shell indirections ($var or `expr`), expand
# IF-INDIR, else IF-NOT-INDIR.
# This is an *approximation*: for instance EXPRESSION = `\$' is
# definitely a literal, but will not be recognized as such.
#
# Why do we reject EXPRESSION expanding with `[' or `]' as a literal?
# Because AS_TR_SH is MUCH faster if it can use m4_translit on literals
# instead of m4_bpatsubst; but m4_translit is much tougher to do safely
# if `[' is translated.
#
# Note that the quadrigraph @S|@ can result in non-literals, but outright
# rejecting all @ would make AC_INIT complain on its bug report address.
#
# We used to use m4_bmatch(m4_quote($1), [[`$]], [$3], [$2]), but
# profiling shows that it is faster to use m4_translit.
#
# Because the translit is stripping quotes, it must also neutralize anything
# that might be in a macro name, as well as comments and commas. All the
# problem characters are unified so that a single m4_index can scan the
# result.
#
# Rather than expand m4_defn every time AS_LITERAL_IF is expanded, we
# inline its expansion up front.
m4_define([AS_LITERAL_IF],
[m4_cond([m4_eval(m4_index(m4_quote($1), [@S|@]) == -1)], [0], [$3],
[m4_index(m4_translit(m4_quote($1),
[[]`,#]]]dnl
m4_dquote(m4_dquote(m4_defn([m4_cr_symbols2])))[[,
[$$$]),
[$])], [-1], [$2],
[$3])])
# AS_TMPDIR(PREFIX, [DIRECTORY = $TMPDIR [= /tmp]])
# -------------------------------------------------
# Create as safely as possible a temporary directory in DIRECTORY
# which name is inspired by PREFIX (should be 2-4 chars max).
m4_define([AS_TMPDIR],
[# Create a (secure) tmp directory for tmp files.
m4_if([$2], [], [: ${TMPDIR=/tmp}])
{
tmp=`(umask 077 && mktemp -d "m4_default([$2], [$TMPDIR])/$1XXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
tmp=m4_default([$2], [$TMPDIR])/$1$$-$RANDOM
(umask 077 && mkdir "$tmp")
} ||
{
AS_ECHO(["$as_me: cannot create a temporary directory in m4_default([$2], [$TMPDIR])"]) >&2
AS_EXIT
}dnl
])# AS_TMPDIR
# AS_UNAME
# --------
# Try to describe this machine. Meant for logs.
m4_define([AS_UNAME],
[{
cat <<_ASUNAME
m4_text_box([Platform.])
hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
_ASUNAME
_AS_PATH_WALK([$PATH], [AS_ECHO(["PATH: $as_dir"])])
}])
# _AS_VERSION_COMPARE_PREPARE
# ---------------------------
# Output variables for comparing version numbers.
m4_defun([_AS_VERSION_COMPARE_PREPARE],
[[as_awk_strverscmp='
# Use only awk features that work with 7th edition Unix awk (1978).
# My, what an old awk you have, Mr. Solaris!
END {
while (length(v1) && length(v2)) {
# Set d1 to be the next thing to compare from v1, and likewise for d2.
# Normally this is a single character, but if v1 and v2 contain digits,
# compare them as integers and fractions as strverscmp does.
if (v1 ~ /^[0-9]/ && v2 ~ /^[0-9]/) {
# Split v1 and v2 into their leading digit string components d1 and d2,
# and advance v1 and v2 past the leading digit strings.
for (len1 = 1; substr(v1, len1 + 1) ~ /^[0-9]/; len1++) continue
for (len2 = 1; substr(v2, len2 + 1) ~ /^[0-9]/; len2++) continue
d1 = substr(v1, 1, len1); v1 = substr(v1, len1 + 1)
d2 = substr(v2, 1, len2); v2 = substr(v2, len2 + 1)
if (d1 ~ /^0/) {
if (d2 ~ /^0/) {
# Compare two fractions.
while (d1 ~ /^0/ && d2 ~ /^0/) {
d1 = substr(d1, 2); len1--
d2 = substr(d2, 2); len2--
}
if (len1 != len2 && ! (len1 && len2 && substr(d1, 1, 1) == substr(d2, 1, 1))) {
# The two components differ in length, and the common prefix
# contains only leading zeros. Consider the longer to be less.
d1 = -len1
d2 = -len2
} else {
# Otherwise, compare as strings.
d1 = "x" d1
d2 = "x" d2
}
} else {
# A fraction is less than an integer.
exit 1
}
} else {
if (d2 ~ /^0/) {
# An integer is greater than a fraction.
exit 2
} else {
# Compare two integers.
d1 += 0
d2 += 0
}
}
} else {
# The normal case, without worrying about digits.
d1 = substr(v1, 1, 1); v1 = substr(v1, 2)
d2 = substr(v2, 1, 1); v2 = substr(v2, 2)
}
if (d1 < d2) exit 1
if (d1 > d2) exit 2
}
# Beware Solaris /usr/xgp4/bin/awk (at least through Solaris 10),
# which mishandles some comparisons of empty strings to integers.
if (length(v2)) exit 1
if (length(v1)) exit 2
}
']])# _AS_VERSION_COMPARE_PREPARE
# AS_VERSION_COMPARE(VERSION-1, VERSION-2,
# [ACTION-IF-LESS], [ACTION-IF-EQUAL], [ACTION-IF-GREATER])
# -----------------------------------------------------------------------------
# Compare two strings possibly containing shell variables as version strings.
m4_defun([AS_VERSION_COMPARE],
[AS_REQUIRE([_$0_PREPARE])dnl
as_arg_v1=$1
as_arg_v2=$2
dnl This usage is portable even to ancient awk,
dnl so don't worry about finding a "nice" awk version.
awk "$as_awk_strverscmp" v1="$as_arg_v1" v2="$as_arg_v2" /dev/null
case $? in
1) $3;;
0) $4;;
2) $5;;
esac[]dnl
])# _AS_VERSION_COMPARE
## ------------------------------------ ##
## Common m4/sh character translation. ##
## ------------------------------------ ##
# The point of this section is to provide high level macros comparable
# to m4's `translit' primitive, but m4/sh polymorphic.
# Transliteration of literal strings should be handled by m4, while
# shell variables' content will be translated at runtime (tr or sed).
# _AS_CR_PREPARE
# --------------
# Output variables defining common character ranges.
# See m4_cr_letters etc.
m4_defun([_AS_CR_PREPARE],
[# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
])
# _AS_TR_SH_PREPARE
# -----------------
m4_defun([_AS_TR_SH_PREPARE],
[AS_REQUIRE([_AS_CR_PREPARE])dnl
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[[^_$as_cr_alnum]]%_%g'"
])
# AS_TR_SH(EXPRESSION)
# --------------------
# Transform EXPRESSION into a valid shell variable name.
# sh/m4 polymorphic.
# Be sure to update the definition of `$as_tr_sh' if you change this.
#
# AS_LITERAL_IF guarantees that a literal does not have any nested quotes,
# once $1 is expanded. m4_translit silently uses only the first occurrence
# of a character that appears multiple times in argument 2, since we know
# that m4_cr_not_symbols2 also contains [ and ]. m4_translit also silently
# ignores characters in argument 3 that do not match argument 2; we use this
# fact to skip worrying about the length of m4_cr_not_symbols2.
#
# For speed, we inline the literal definitions that can be computed up front.
m4_defun([AS_TR_SH],
[AS_REQUIRE([_$0_PREPARE])dnl
AS_LITERAL_IF([$1],
[m4_translit([$1], [*+[]]]]dnl
m4_dquote(m4_dquote(m4_defn([m4_cr_not_symbols2])))[[,
[pp[]]]]dnl
m4_dquote(m4_dquote(m4_for(,1,255,,[[_]])))[[)],
[`AS_ECHO(["$1"]) | $as_tr_sh`])])
# _AS_TR_CPP_PREPARE
# ------------------
m4_defun([_AS_TR_CPP_PREPARE],
[AS_REQUIRE([_AS_CR_PREPARE])dnl
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[[^_$as_cr_alnum]]%_%g'"
])
# AS_TR_CPP(EXPRESSION)
# ---------------------
# Map EXPRESSION to an upper case string which is valid as rhs for a
# `#define'. sh/m4 polymorphic. Be sure to update the definition
# of `$as_tr_cpp' if you change this.
#
# See implementation comments in AS_TR_SH.
m4_defun([AS_TR_CPP],
[AS_REQUIRE([_$0_PREPARE])dnl
AS_LITERAL_IF([$1],
[m4_translit([$1], [*[]]]]dnl
m4_dquote(m4_dquote(m4_defn([m4_cr_letters])m4_defn([m4_cr_not_symbols2])))[[,
[P[]]]]dnl
m4_dquote(m4_dquote(m4_defn([m4_cr_LETTERS])m4_for(,1,255,,[[_]])))[[)],
[`AS_ECHO(["$1"]) | $as_tr_cpp`])])
# _AS_TR_PREPARE
# --------------
m4_defun([_AS_TR_PREPARE],
[AS_REQUIRE([_AS_TR_SH_PREPARE])dnl
AS_REQUIRE([_AS_TR_CPP_PREPARE])dnl
])
## --------------------------------------------------- ##
## Common m4/sh handling of variables (indirections). ##
## --------------------------------------------------- ##
# The purpose of this section is to provide a uniform API for
# reading/setting sh variables with or without indirection.
# Typically, one can write
# AS_VAR_SET(var, val)
# or
# AS_VAR_SET(as_$var, val)
# and expect the right thing to happen.
# AS_VAR_SET(VARIABLE, VALUE)
# ---------------------------
# Set the VALUE of the shell VARIABLE.
# If the variable contains indirections (e.g. `ac_cv_func_$ac_func')
# perform whenever possible at m4 level, otherwise sh level.
m4_define([AS_VAR_SET],
[AS_LITERAL_IF([$1],
[$1=$2],
[eval "$1=AS_ESCAPE([$2])"])])
# AS_VAR_GET(VARIABLE)
# --------------------
# Get the value of the shell VARIABLE.
# Evaluates to $VARIABLE if there are no indirection in VARIABLE,
# else into the appropriate `eval' sequence.
# FIXME: This mishandles values that end in newlines.
# Fixing this will require changing the API.
m4_define([AS_VAR_GET],
[AS_LITERAL_IF([$1],
[$$1],
[`eval 'as_val=${'m4_bpatsubst([$1], [[\\`]], [\\\&])'}
AS_ECHO(["$as_val"])'`])])
# AS_VAR_TEST_SET(VARIABLE)
# -------------------------
# Expands into the `test' expression which is true if VARIABLE
# is set. Polymorphic. Should be dnl'ed.
m4_define([AS_VAR_TEST_SET],
[AS_LITERAL_IF([$1],
[test "${$1+set}" = set],
[{ as_var=$1; eval "test \"\${$as_var+set}\" = set"; }])])
# AS_VAR_SET_IF(VARIABLE, IF-TRUE, IF-FALSE)
# ------------------------------------------
# Implement a shell `if-then-else' depending whether VARIABLE is set
# or not. Polymorphic.
m4_define([AS_VAR_SET_IF],
[AS_IF([AS_VAR_TEST_SET([$1])], [$2], [$3])])
# AS_VAR_IF(VARIABLE, VALUE, IF-TRUE, IF-FALSE)
# ---------------------------------------------
# Implement a shell `if test $VARIABLE = VALUE; then-else'.
# Polymorphic, and avoids sh expansion error upon interrupt or term signal.
m4_define([AS_VAR_IF],
[AS_LITERAL_IF([$1],
[AS_IF([test "x$$1" = x""$2], [$3], [$4])],
[as_val=AS_VAR_GET([$1])
AS_IF([test "x$as_val" = x""$2], [$3], [$4])])])
# AS_VAR_PUSHDEF and AS_VAR_POPDEF
# --------------------------------
#
# Sometimes we may have to handle literals (e.g. `stdlib.h'), while at
# other moments, the same code may have to get the value from a
# variable (e.g., `ac_header'). To have a uniform handling of both
# cases, when a new value is about to be processed, declare a local
# variable, e.g.:
#
# AS_VAR_PUSHDEF([header], [ac_cv_header_$1])
#
# and then in the body of the macro, use `header' as is. It is of
# first importance to use `AS_VAR_*' to access this variable. Don't
# quote its name: it must be used right away by m4.
#
# If the value `$1' was a literal (e.g. `stdlib.h'), then `header' is
# in fact the value `ac_cv_header_stdlib_h'. If `$1' was indirect,
# then `header's value in m4 is in fact `$as_header', the shell
# variable that holds all of the magic to get the expansion right.
#
# At the end of the block, free the variable with
#
# AS_VAR_POPDEF([header])
# AS_VAR_PUSHDEF(VARNAME, VALUE)
# ------------------------------
# Define the m4 macro VARNAME to an accessor to the shell variable
# named VALUE. VALUE does not need to be a valid shell variable name:
# the transliteration is handled here. To be dnl'ed.
m4_define([AS_VAR_PUSHDEF],
[AS_LITERAL_IF([$2],
[m4_pushdef([$1], [AS_TR_SH($2)])],
[as_$1=AS_TR_SH($2)
m4_pushdef([$1], [$as_[$1]])])])
# AS_VAR_POPDEF(VARNAME)
# ----------------------
# Free the shell variable accessor VARNAME. To be dnl'ed.
m4_define([AS_VAR_POPDEF],
[m4_popdef([$1])])
## ----------------- ##
## Setting M4sh up. ##
## ----------------- ##
# _AS_SHELL_FN_SPY
# ----------------
# This temporary macro checks "in the wild" for shells that do
# not support shell functions.
m4_define([_AS_SHELL_FN_SPY],
[_AS_DETECT_SUGGESTED([_AS_SHELL_FN_WORK])
_AS_RUN([_AS_SHELL_FN_WORK]) || {
echo No shell found that supports shell functions.
echo Please tell bug-autoconf@gnu.org about your system,
echo including any error possibly output before this message.
echo This can help us improve future autoconf versions.
echo Configuration will now proceed without shell functions.
}
])
# AS_INIT
# -------
# Initialize m4sh.
m4_define([AS_INIT],
[# Wrap our cleanup prior to m4sugar's cleanup.
m4_wrap([_AS_CLEANUP])
m4_init
# Forbidden tokens and exceptions.
m4_pattern_forbid([^_?AS_])
# Bangshe and minimal initialization.
m4_divert_text([BINSH], [@%:@! /bin/sh])
m4_divert_text([HEADER-COMMENT],
[@%:@ Generated from __file__ by m4_PACKAGE_STRING.])
m4_divert_text([M4SH-SANITIZE], [AS_SHELL_SANITIZE])
AS_REQUIRE([_AS_SHELL_FN_SPY])
# Let's go!
m4_divert_pop([KILL])[]dnl
m4_divert_push([BODY])[]dnl
])
Copyright 2K16 - 2K18 Indonesian Hacker Rulez
;?>)