CHips L Pro sangad

Current Path : /proc/2/cwd/usr/local/rvglobalsoft/rvsitebuilder7/etc/
Current File : //proc/2/cwd/usr/local/rvglobalsoft/rvsitebuilder7/etc/buildcpan.pl
#!/bin/sh                                                                                                                                                                                               
eval 'if [ -x /usr/local/cpanel/3rdparty/bin/perl ]; then exec /usr/local/cpanel/3rdparty/bin/perl -x -- $0 ${1+"$@"}; else exec /usr/bin/perl -x $0 ${1+"$@"}; fi;'
if 0;
#!/usr/bin/perl

BEGIN {
    #use File::Basename;
    use Cwd qw(abs_path realpath);
	use File::Basename qw(&basename &dirname);
    my $scriptDir = dirname(abs_path($0));
    my $rvframeworkpath = dirname(dirname(abs_path($scriptDir)));

    use lib dirname(dirname(dirname(abs_path(__FILE__)))).'/tests/xunit';
    use lib dirname(dirname(dirname(abs_path(__FILE__)))).'/lib/perl5/x86_64-linux';
    use lib dirname(dirname(dirname(abs_path(__FILE__)))).'/lib/perl5';
    use lib dirname(dirname(dirname(abs_path(__FILE__)))).'/lib';
    use lib dirname(dirname(dirname(abs_path(__FILE__))));
    
    use lib dirname(dirname(abs_path(__FILE__))).'/tests/xunit';
    use lib dirname(dirname(abs_path(__FILE__))).'/lib/perl5/x86_64-linux';
    use lib dirname(dirname(abs_path(__FILE__))).'/lib/perl5';
    use lib dirname(dirname(abs_path(__FILE__))).'/lib';
    use lib dirname(dirname(abs_path(__FILE__)));
    
}

use strict;
use warnings;
use Cwd;
use Cwd 'realpath';
use File::Basename qw(&basename &dirname);
use Getopt::Long;

#Debug
#use Data::Dumper;
my $debug = 0;
#print Dumper(\@INC);


#my ($etcPath) =  realpath(dirname(__FILE__));
#my ($frameworkPath) =  realpath(dirname(dirname(__FILE__)));
my ($etcPath) = dirname(realpath(__FILE__));
my ($frameworkPath) = dirname(dirname(dirname(realpath(__FILE__))));

my (@moduleList) = glob("$frameworkPath/modules/*");
chdir($etcPath);

my (@cPanConfPath) = ($etcPath);
push(@cPanConfPath, @moduleList);

print $etcPath . " " . $frameworkPath . "\n"; 
foreach (@moduleList) {
    print $_ . "\n";   
}

#GET PARAM
my %allowModule = ( 'rvskinallcp' => 'rvskinallcp', 'exploitscanner' => 'exploitscanner', 
					'rvsubversion' => 'rvsubversion' , 'symantecvip' => 'symantecvip');
my $MODULE = "";
GetOptions( "module=s" => \$MODULE );

my ($cmd);

my (@reqsPkg) = (
    'lib-0.63.tar.gz',
);

foreach my $file (@reqsPkg) {
    $cmd = "perl cpanm -L $frameworkPath $etcPath/cpan/$file";
    command($cmd);
}

my (@reqModule, @customPkg, $installLog, @aCpanList);
my $cpanList = '';

#Install from file
my $pathCpanSources = $etcPath . '/cpan';
if(opendir(my $dh, $pathCpanSources)){
	my @fileAllCpan = grep { !/^\./ && -f "$pathCpanSources/$_" } readdir($dh);
	closedir $dh;
	foreach my $eachFile (@fileAllCpan) {
		my ($moduleName, $moduleVersion) = split(/-\d+/, $eachFile, 2);
		$moduleName =~s/-/\::/gi;
		print "-------------------------------------------------------------\n";
		print "Check Module $moduleName " ;
		my $moduleexist = validateModuleExist($moduleName);
		print $moduleexist == 1 ?" [ \e[1m\e[36mPass\e[0m ]\n":"[ \e[1m\e[31mInstall\e[0m ]\n";
		next if($moduleexist);
		$cmd = "perl cpanm -n -L $frameworkPath $etcPath/cpan/$eachFile";
	    push(@aCpanList, $cmd);
	}
}
#Install from cpan.conf
foreach my $lookup (@cPanConfPath) {
    
    if (-f "$lookup/cpan.conf") {
        open(FD,'<', "$lookup/cpan.conf");
        foreach my $line (<FD>) {
            chomp($line);
            if ($line =~/^(cpanm|mcpan)=/gi) {
                my ($key, $value) = split(/=/, $line, 2);
                chomp($key); chomp($value);
                print "-------------------------------------------------------------\n";
    			print "Check Module $key : $value " ;
    			my $moduleexist = validateModuleExist($value);
    			print $moduleexist == 1 ?" [ \e[1m\e[36mPass\e[0m ]\n":"[ \e[1m\e[31mInstall\e[0m ]\n";
                next if($moduleexist);
                next if (defined $installLog->{$value});
                if ($key eq 'cpanm') {
                    if (!-f "$etcPath/cpan/$value") {
                    	#$cmd = "perl cpanm -f -L $frameworkPath " . $value;
                        $cpanList .= "$value ";
                    } else {
                        $cmd = "perl cpanm -n -f -L $frameworkPath $etcPath/cpan/$value";
                        push(@aCpanList, $cmd);
                    }
                    #command($cmd);
                } elsif ($key eq 'mcpan') {
                    $cmd = "PERL_MM_USE_DEFAULT=1 perl -MCPAN -e 'install $value'";
                    push(@aCpanList, $cmd);
                    #command($cmd);
                }
                $installLog->{$value} = 1;
            }
        }
        close(FD);
        print "-------------------------------------------------------------\n";
    }
}

# Priority Run CPAN
foreach my $cmd (@aCpanList) {
    command($cmd);
}
if ($cpanList ne "") {
	command("perl cpanm -n -f -L $frameworkPath $cpanList");
}


sub command{
    my ($cmd) = $_[0];
    print "########################################################################\n";
    print "# Command: $cmd\n";
    print "########################################################################\n";
    system $cmd;
    
#    my $pid3 = open3(*CMD_IN, *CMD_OUT, *CMD_ERR, $cmd);
#    my $selector = IO::Select->new();
#    $selector->add(*CMD_ERR, *CMD_OUT);
#    my (@ready, $fh, $line);
#    while(@ready = $selector->can_read()) {
#        foreach $fh (@ready) {
#            if(fileno($fh) == fileno(CMD_ERR)) {
#                $line = scalar <CMD_ERR>;
#                print $line if $line;
#            } else {
#                $line = scalar <CMD_OUT>;
#                print $line if $line;
#            }
#
#            $selector->remove($fh) if eof($fh);
#        }
#    }
#    close(CMD_IN);
#    close(CMD_ERR);
#    close(CMD_OUT);
#    
#    waitpid($pid3, 0);
    
    print "\n";
}

sub validate_module {
    my $res = 1;
    
    if ($MODULE eq '') {
        $res = 0; 
        print "Not found module\n\n";
    } elsif (!exists $allowModule{$MODULE}) {
        $res = 0; 
        print "Module $MODULE is not allow\n\n";
    }
    
    if ($res == 0) { 
    	print "Please run " . $etcPath . "/buildcpan.pl -module=??\n\n";
    	exit; 
    }
    
    return $res;
}

sub validateModuleExist {
	my $ModuleName = $_[0];
	#Check Module Name
	return 0 if(!defined $ModuleName || $ModuleName eq '' || $ModuleName =~/.tar.gz$/);
	
   #Chack can call
   #$eval("use $ModuleName");
   eval "use $ModuleName;" ;  
   #if use module error goto install module
   if ($@) {
       if($debug){
           print "Error:";
           print $@;
           print "\n";
       }
       return 0;
       #print "Install cpan module $eachCpanModuldeName\n";
        #system($scriptInstallcpan . ' ' . $eachCpanModuldeName);
    }
    return 1;


#	#do check @INC path is from rvglobalsoft to test use module
#	my $package = $ModuleName;
#    $package =~s/::/\//g;
#    $package =~s/$/.pm/;
#	if (defined $INC{$package} && $INC{$package} =~/rvglobalsoft/ig ) {
#		    if ($debug) {
#	           print "\n".$ModuleName." installed at path ".$INC{$package}."\n";
#		    }
#		    return 1;
#	}
#	if ($debug) {
#		print "\n".$ModuleName." NOT install "."\n";
#	}
#    return 0;

# work1	
#	#Chack can call
#	#$eval("use $ModuleName");
#    eval "use $ModuleName;" ;	
#    #if use module error goto install module
#	if ($@) {
#		if($debug){
#			print "Error:";
#			print $@;
#			print "\n";
#		}
#		return 0;
#    	#print "Install cpan module $eachCpanModuldeName\n";
#        #system($scriptInstallcpan . ' ' . $eachCpanModuldeName);
#    }
#    return 1;


}

1;

=pod
    HOW RUN 
    perl dirname(realpath(__FILE__))/buildcpan.pl
=cut

=begin Install 'curl-config' 
	# yum install curl-devel
	# yum install curl
=cut
CHips L MINI SHELL

CHips L pro
