| Current Path : /proc/2/cwd/usr/share/doc/dovecot-2.3.10.1/wiki/ |
| Current File : //proc/2/cwd/usr/share/doc/dovecot-2.3.10.1/wiki/PasswordDatabase.txt |
Password Databases
==================
Dovecot authenticates users against password databases. It can also be used to
configure things like <proxies> [PasswordDatabase.ExtraFields.Proxy.txt].
You can use multiple databases, so if the password doesn't match in the first
database, Dovecot checks the next one. This can be useful if you want to easily
support having both virtual users and also local system users (see
<Authentication.MultipleDatabases.txt>).
Success/failure databases
-------------------------
These databases simply verify if the given password is correct for the user.
Dovecot doesn't get the correct password from the database, it only gets a
"success" or a "failure" reply. This means that these databases can't be used
with non-plaintext <authentication mechanisms> [Authentication.Mechanisms.txt].
Databases that belong to this category are:
* <PAM> [PasswordDatabase.PAM.txt]: Pluggable Authentication Modules.
* <BSDAuth> [PasswordDatabase.BSDAuth.txt]: BSD authentication.
* <CheckPassword> [AuthDatabase.CheckPassword.txt]: External checkpassword
program without Dovecot extensions.
* <IMAP> [PasswordDatabase.IMAP.txt]: Authenticate against remote IMAP server.
* <OAuth2> [PasswordDatabase.oauth2.txt]: Authenticate against oauth2 provider
(v2.2.29+)
Lookup databases
----------------
Dovecot does a lookup based on the username and possibly other information
(e.g. IP address) and verifies the password validity itself. Fields that the
lookup can return:
* * <password> [Authentication.PasswordSchemes.txt]*: User's password.
* *password_noscheme*: Like "password", but if a password begins with "{",
assume it belongs to the password itself instead of treating it as a
<scheme> [Authentication.PasswordSchemes.txt] prefix. This is usually
needed only if you use plaintext passwords.
* * <user> [PasswordDatabase.ExtraFields.User.txt]*: Returning a user field
can be used to change the username. Typically used only for case changes
(e.g. "UseR" -> "user").
* *username*: Like user, but doesn't drop existing domain name (e.g.
"username=foo" for "user@domain" gives "foo@domain").
* *domain*: Updates the domain part of the username.
* Other special <extra fields> [PasswordDatabase.ExtraFields.txt].
Databases that support looking up only passwords, but no user or extra fields:
* <Passwd> [AuthDatabase.Passwd.txt]: System users (NSS, '/etc/passwd', or
similiar).
* <Shadow> [PasswordDatabase.Shadow.txt]: Shadow passwords for system users
(NSS,'/etc/shadow' or similiar).
* Dovecot supports reading all <password schemes>
[Authentication.PasswordSchemes.txt] from passwd and shadow databases (if
prefix is specified), but that is of course incompatible with all other
tools using/modifying the passwords.
* <VPopMail> [AuthDatabase.VPopMail.txt]: External software used to handle
virtual domains.
Databases that support looking up everything:
* <Passwd-file> [AuthDatabase.PasswdFile.txt]: '/etc/passwd'-like file in
specified location.
* <LDAP> [AuthDatabase.LDAP.txt]: Lightweight Directory Access Protocol.
* <SQL> [AuthDatabase.SQL.txt]: SQL database (PostgreSQL, MySQL, SQLite).
* <Dict> [AuthDatabase.Dict.txt]: Dict key-value database (Redis, memcached,
etc.)
* <CheckPassword> [AuthDatabase.CheckPassword.txt]: External checkpassword
program when used with Dovecot extensions.
* <Static> [PasswordDatabase.Static.txt]: Static passdb for simple
configurations
* <Lua> [AuthDatabase.Lua.txt]: Lua script for authentication (v2.3.0+)
Passdb settings
---------------
An example passdb passwd-file with its default settings:
---%<-------------------------------------------------------------------------
passdb {
driver = passwd-file
args = scheme=ssha256 /usr/local/etc/passwd.replica
default_fields =
override_fields =
deny = no
master = no
pass = no
skip = never
mechanisms =
username_filter =
result_failure = continue
result_internalfail = continue
result_success = return-ok
# v2.2.24+
auth_verbose = default
}
---%<-------------------------------------------------------------------------
First we have the settings that provide content for the passdb lookup:
* driver: The passdb backend name
* args: Arguments for the passdb backend. The format of this value depends on
the passdb driver. Each one uses different args.
* default_fields: Passdb fields (and <extra fields>
[PasswordDatabase.ExtraFields.txt]) that are used, unless overwritten by the
passdb backend. They are in format 'key=value key2=value2 ...'. The values
can contain <%variables> [Variables.txt].
* override_fields: Same as default_fields, but instead of providing the
default values, these values override what the passdb backend returned.
* auth_verbose: If this is explicitly set to yes or no, it overrides the
global auth_verbose setting. (However, auth_debug=yes overrides the
auth_verbose setting.) (v2.2.24+)
Then we have the settings which specify when the passdb is used:
* deny: If "yes", used to provide "denied users database". If the user is
found from the passdb, the authentication will fail.
* master: If "yes", used to provide <master users database>
[Authentication.MasterUsers.txt]. The users listed in the master passdb can
log in as other users.
* pass: This is an alias for 'result_success = continue' as described
below. This was commonly used together with master passdb to specify that
even after a successful master user authentication, the authentication
should continue to the actual non-master passdb to lookup the user.
* skip: Do we sometimes want to skip over this passdb?
* never
* authenticated: Skip if an earlier passdb already authenticated the user
successfully.
* unauthenticated: Skip if user hasn't yet been successfully authenticated
by the previous passdbs.
* mechanisms: Skip, if non-empty and the current auth mechanism is not listed
here. Space or comma-separated list of auth mechanisms (e.g. "PLAIN LOGIN").
Also "none" can be used to match for a non-authenticating passdb lookup.
(v2.2.30+)
* username_filter: Skip, if non-empty and the username doesn't match the
filter. This is mainly used to assign specific passdbs to specific domains.
Space or comma-separated list of username filters that can have "*" or "?"
wildcards. If any of the filters matches, the filter succeeds. However,
there can also be negative matches preceded by "!". If any of the negative
filters matches, the filter won't succeed. For example if the filter is
"*@example.com *@example2.com !user@example.com", "any@example.com" or
"user@example2.com" matches but "user@example.com" won't match. (v2.2.30+)
And finally we can control what happens when we're finished with this passdb:
* result_success: What to do if the authentication succeeded (default:
return-ok)
* result_failure: What to do if authentication failed (default: continue)
* result_internalfail: What to do if the passdb lookup had an internal failure
(default: continue). If any of the passdbs had an internal failure and the
final passdb also returns "continue", the authentication will fail with
"internal error".*WARNING*: If multiple passdbs are required (results are
merged), it's important to set result_internalfail=return-fail to them,
otherwise the authentication could still succeed but not all the intended
extra fields are set.
The result values that can be used:
* return-ok: Return success, don't continue to the next passdb.
* return-fail: Return failure, don't continue to the next passdb.
* return: Return earlier passdb's success or failure, don't continue to the
next passdb. If this was the first passdb, return failure.
* continue-ok: Set the current authentication state to success, and continue
to the next passdb. The following passdbs will skip password verification.
* continue-fail: Set the current authentication state to failure, and continue
to the next passdb. The following passdbs will still verify the password.
* continue: Continue to the next passdb without changing the authentication
state. The initial state is failure. If this was set in result_success, the
following passdbs will skip password verification.
*NOTICE*: when using "continue*" values on a *master* passdb (master = yes),
execution will jump to the first *non-master* passdb instead of continuing with
the next master passdb (verified at lest up to v2.2.27).
(This file was created from the wiki on 2019-06-19 12:42)
Copyright 2K16 - 2K18 Indonesian Hacker Rulez
;?>)