| Current Path : /proc/2/cwd/usr/share/perl5/HTML/Element/ |
| Current File : //proc/2/cwd/usr/share/perl5/HTML/Element/traverse.pm |
# This is a .pm just to (try to) make some CPAN document converters
# convert it happily as part of the dist's documentation tree.
package HTML::Element::traverse;
# ABSTRACT: discussion of HTML::Element's traverse method
use warnings;
use strict;
our $VERSION = '5.06'; # VERSION from OurPkgVersion
use HTML::Element ();
1;
__END__
=pod
=head1 NAME
HTML::Element::traverse - discussion of HTML::Element's traverse method
=head1 VERSION
This document describes version 5.06 of
HTML::Element::traverse, released April 28, 2017
as part of L<HTML-Tree|HTML::Tree>.
=head1 SYNOPSIS
# $element->traverse is unnecessary and obscure.
# Don't use it in new code.
=head1 DESCRIPTION
C<HTML::Element> provides a method C<traverse> that traverses the tree
and calls user-specified callbacks for each node, in pre- or
post-order. However, use of the method is quite superfluous: if you
want to recursively visit every node in the tree, it's almost always
simpler to write a subroutine does just that, than it is to bundle up
the pre- and/or post-order code in callbacks for the C<traverse>
method.
=head1 EXAMPLES
Suppose you want to traverse at/under a node $tree and give elements
an 'id' attribute unless they already have one.
You can use the C<traverse> method:
{
my $counter = 'x0000';
$start_node->traverse(
[ # Callbacks;
# pre-order callback:
sub {
my $x = $_[0];
$x->attr('id', $counter++) unless defined $x->attr('id');
return HTML::Element::OK; # keep traversing
},
# post-order callback:
undef
],
1, # don't call the callbacks for text nodes
);
}
or you can just be simple and clear (and not have to understand the
calling format for C<traverse>) by writing a sub that traverses the
tree by just calling itself:
{
my $counter = 'x0000';
sub give_id {
my $x = $_[0];
$x->attr('id', $counter++) unless defined $x->attr('id');
foreach my $c ($x->content_list) {
give_id($c) if ref $c; # ignore text nodes
}
};
give_id($start_node);
}
See, isn't that nice and clear?
But, if you really need to know:
=head1 THE TRAVERSE METHOD
The C<traverse()> method is a general object-method for traversing a
tree or subtree and calling user-specified callbacks. It accepts the
following syntaxes:
=over
=item $h->traverse(\&callback)
=item or $h->traverse(\&callback, $ignore_text)
=item or $h->traverse( [\&pre_callback,\&post_callback] , $ignore_text)
=back
These all mean to traverse the element and all of its children. That
is, this method starts at node $h, "pre-order visits" $h, traverses its
children, and then will "post-order visit" $h. "Visiting" means that
the callback routine is called, with these arguments:
$_[0] : the node (element or text segment),
$_[1] : a startflag, and
$_[2] : the depth
If the $ignore_text parameter is given and true, then the pre-order
call I<will not> be happen for text content.
The startflag is 1 when we enter a node (i.e., in pre-order calls) and
0 when we leave the node (in post-order calls).
Note, however, that post-order calls don't happen for nodes that are
text segments or are elements that are prototypically empty (like "br",
"hr", etc.).
If we visit text nodes (i.e., unless $ignore_text is given and true),
then when text nodes are visited, we will also pass two extra
arguments to the callback:
$_[3] : the element that's the parent
of this text node
$_[4] : the index of this text node
in its parent's content list
Note that you can specify that the pre-order routine can
be a different routine from the post-order one:
$h->traverse( [\&pre_callback,\&post_callback], ...);
You can also specify that no post-order calls are to be made,
by providing a false value as the post-order routine:
$h->traverse([ \&pre_callback,0 ], ...);
And similarly for suppressing pre-order callbacks:
$h->traverse([ 0,\&post_callback ], ...);
Note that these two syntaxes specify the same operation:
$h->traverse([\&foo,\&foo], ...);
$h->traverse( \&foo , ...);
The return values from calls to your pre- or post-order
routines are significant, and are used to control recursion
into the tree.
These are the values you can return, listed in descending order
of my estimation of their usefulness:
=over
=item HTML::Element::OK, 1, or any other true value
...to keep on traversing.
Note that C<HTML::Element::OK> et
al are constants. So if you're running under C<use strict>
(as I hope you are), and you say:
C<return HTML::Element::PRUEN>
the compiler will flag this as an error (an unallowable
bareword, specifically), whereas if you spell PRUNE correctly,
the compiler will not complain.
=item undef, 0, '0', '', or HTML::Element::PRUNE
...to block traversing under the current element's content.
(This is ignored if received from a post-order callback,
since by then the recursion has already happened.)
If this is returned by a pre-order callback, no
post-order callback for the current node will happen.
(Recall that if your callback exits with just C<return;>,
it is returning undef -- at least in scalar context, and
C<traverse> always calls your callbacks in scalar context.)
=item HTML::Element::ABORT
...to abort the whole traversal immediately.
This is often useful when you're looking for just the first
node in the tree that meets some criterion of yours.
=item HTML::Element::PRUNE_UP
...to abort continued traversal into this node and its parent
node. No post-order callback for the current or parent
node will happen.
=item HTML::Element::PRUNE_SOFTLY
Like PRUNE, except that the post-order call for the current
node is not blocked.
=back
Almost every task to do with extracting information from a tree can be
expressed in terms of traverse operations (usually in only one pass,
and usually paying attention to only pre-order, or to only
post-order), or operations based on traversing. (In fact, many of the
other methods in this class are basically calls to traverse() with
particular arguments.)
The source code for HTML::Element and HTML::TreeBuilder contain
several examples of the use of the "traverse" method to gather
information about the content of trees and subtrees.
(Note: you should not change the structure of a tree I<while> you are
traversing it.)
[End of documentation for the C<traverse()> method]
=head2 Traversing with Recursive Anonymous Routines
Now, if you've been reading
I<Structure and Interpretation of Computer Programs> too much, maybe
you even want a recursive lambda. Go ahead:
{
my $counter = 'x0000';
my $give_id;
$give_id = sub {
my $x = $_[0];
$x->attr('id', $counter++) unless defined $x->attr('id');
foreach my $c ($x->content_list) {
$give_id->($c) if ref $c; # ignore text nodes
}
};
$give_id->($start_node);
undef $give_id;
}
It's a bit nutty, and it's I<still> more concise than a call to the
C<traverse> method!
It is left as an exercise to the reader to figure out how to do the
same thing without using a C<$give_id> symbol at all.
It is also left as an exercise to the reader to figure out why I
undefine C<$give_id>, above; and why I could achieved the same effect
with any of:
$give_id = 'I like pie!';
# or...
$give_id = [];
# or even;
$give_id = sub { print "Mmmm pie!\n" };
But not:
$give_id = sub { print "I'm $give_id and I like pie!\n" };
# nor...
$give_id = \$give_id;
# nor...
$give_id = { 'pie' => \$give_id, 'mode' => 'a la' };
=head2 Doing Recursive Things Iteratively
Note that you may at times see an iterative implementation of
pre-order traversal, like so:
{
my @to_do = ($tree); # start-node
while(@to_do) {
my $this = shift @to_do;
# "Visit" the node:
$this->attr('id', $counter++)
unless defined $this->attr('id');
unshift @to_do, grep ref $_, $this->content_list;
# Put children on the stack -- they'll be visited next
}
}
This can I<under certain circumstances> be more efficient than just a
normal recursive routine, but at the cost of being rather obscure. It
gains efficiency by avoiding the overhead of function-calling, but
since there are several method dispatches however you do it (to
C<attr> and C<content_list>), the overhead for a simple function call
is insignificant.
=head2 Pruning and Whatnot
The C<traverse> method does have the fairly neat features of
the C<ABORT>, C<PRUNE_UP> and C<PRUNE_SOFTLY> signals. None of these
can be implemented I<totally> straightforwardly with recursive
routines, but it is quite possible. C<ABORT>-like behavior can be
implemented either with using non-local returning with C<eval>/C<die>:
my $died_on; # if you need to know where...
sub thing {
... visits $_[0]...
... maybe set $died_on to $_[0] and die "ABORT_TRAV" ...
... else call thing($child) for each child...
...any post-order visiting $_[0]...
}
eval { thing($node) };
if($@) {
if($@ =~ m<^ABORT_TRAV>) {
...it died (aborted) on $died_on...
} else {
die $@; # some REAL error happened
}
}
or you can just do it with flags:
my($abort_flag, $died_on);
sub thing {
... visits $_[0]...
... maybe set $abort_flag = 1; $died_on = $_[0]; return;
foreach my $c ($_[0]->content_list) {
thing($c);
return if $abort_flag;
}
...any post-order visiting $_[0]...
return;
}
$abort_flag = $died_on = undef;
thing($node);
...if defined $abort_flag, it died on $died_on
=head1 SEE ALSO
L<HTML::Element>
=head1 AUTHOR
Current maintainers:
=over
=item * Christopher J. Madsen S<C<< <perl AT cjmweb.net> >>>
=item * Jeff Fearn S<C<< <jfearn AT cpan.org> >>>
=back
Original HTML-Tree author:
=over
=item * Gisle Aas
=back
Former maintainers:
=over
=item * Sean M. Burke
=item * Andy Lester
=item * Pete Krawczyk S<C<< <petek AT cpan.org> >>>
=back
You can follow or contribute to HTML-Tree's development at
L<< https://github.com/kentfredric/HTML-Tree >>.
=head1 COPYRIGHT
Copyright 2000,2001 Sean M. Burke
=cut
Copyright 2K16 - 2K18 Indonesian Hacker Rulez
;?>)