| Current Path : /proc/2/root/usr/local/ssl/include/linux/ |
| Current File : //proc/2/root/usr/local/ssl/include/linux/smbno.h |
#ifndef _SMBNO_H_ #define _SMBNO_H_ /* these define the attribute byte as seen by DOS */ #define aRONLY (1L<<0) #define aHIDDEN (1L<<1) #define aSYSTEM (1L<<2) #define aVOLID (1L<<3) #define aDIR (1L<<4) #define aARCH (1L<<5) /* error classes */ #define SUCCESS 0 /* The request was successful. */ #define ERRDOS 0x01 /* Error is from the core DOS operating system set. */ #define ERRSRV 0x02 /* Error is generated by the server network file manager.*/ #define ERRHRD 0x03 /* Error is an hardware error. */ #define ERRCMD 0xFF /* Command was not in the "SMB" format. */ /* SMB X/Open error codes for the ERRdos error class */ #define ERRbadfunc 1 /* Invalid function (or system call) */ #define ERRbadfile 2 /* File not found (pathname error) */ #define ERRbadpath 3 /* Directory not found */ #define ERRnofids 4 /* Too many open files */ #define ERRnoaccess 5 /* Access denied */ #define ERRbadfid 6 /* Invalid fid */ #define ERRbadmcb 7 /* Memory control blocks destroyed */ #define ERRnomem 8 /* Out of memory */ #define ERRbadmem 9 /* Invalid memory block address */ #define ERRbadenv 10 /* Invalid environment */ #define ERRbadformat 11 /* Invalid format */ #define ERRbadaccess 12 /* Invalid open mode */ #define ERRbaddata 13 /* Invalid data (only from ioctl call) */ #define ERRres 14 /* reserved */ #define ERRbaddrive 15 /* Invalid drive */ #define ERRremcd 16 /* Attempt to delete current directory */ #define ERRdiffdevice 17 /* rename/move across different filesystems */ #define ERRnofiles 18 /* no more files found in file search */ #define ERRbadshare 32 /* Share mode on file conflict with open mode */ #define ERRlock 33 /* Lock request conflicts with existing lock */ #define ERRfilexists 80 /* File in operation already exists */ #define ERRbadpipe 230 /* Named pipe invalid */ #define ERRpipebusy 231 /* All instances of pipe are busy */ #define ERRpipeclosing 232 /* named pipe close in progress */ #define ERRnotconnected 233 /* No process on other end of named pipe */ #define ERRmoredata 234 /* More data to be returned */ #define ERROR_INVALID_PARAMETER 87 #define ERROR_DISK_FULL 112 #define ERROR_INVALID_NAME 123 #define ERROR_DIR_NOT_EMPTY 145 #define ERROR_NOT_LOCKED 158 #define ERROR_ALREADY_EXISTS 183 /* see also 80 ? */ #define ERROR_EAS_DIDNT_FIT 275 /* Extended attributes didn't fit */ #define ERROR_EAS_NOT_SUPPORTED 282 /* Extended attributes not supported */ /* Error codes for the ERRSRV class */ #define ERRerror 1 /* Non specific error code */ #define ERRbadpw 2 /* Bad password */ #define ERRbadtype 3 /* reserved */ #define ERRaccess 4 /* No permissions to do the requested operation */ #define ERRinvnid 5 /* tid invalid */ #define ERRinvnetname 6 /* Invalid servername */ #define ERRinvdevice 7 /* Invalid device */ #define ERRqfull 49 /* Print queue full */ #define ERRqtoobig 50 /* Queued item too big */ #define ERRinvpfid 52 /* Invalid print file in smb_fid */ #define ERRsmbcmd 64 /* Unrecognised command */ #define ERRsrverror 65 /* smb server internal error */ #define ERRfilespecs 67 /* fid and pathname invalid combination */ #define ERRbadlink 68 /* reserved */ #define ERRbadpermits 69 /* Access specified for a file is not valid */ #define ERRbadpid 70 /* reserved */ #define ERRsetattrmode 71 /* attribute mode invalid */ #define ERRpaused 81 /* Message server paused */ #define ERRmsgoff 82 /* Not receiving messages */ #define ERRnoroom 83 /* No room for message */ #define ERRrmuns 87 /* too many remote usernames */ #define ERRtimeout 88 /* operation timed out */ #define ERRnoresource 89 /* No resources currently available for request. */ #define ERRtoomanyuids 90 /* too many userids */ #define ERRbaduid 91 /* bad userid */ #define ERRuseMPX 250 /* temporarily unable to use raw mode, use MPX mode */ #define ERRuseSTD 251 /* temporarily unable to use raw mode, use std.mode */ #define ERRcontMPX 252 /* resume MPX mode */ #define ERRbadPW /* reserved */ #define ERRnosupport 0xFFFF /* Error codes for the ERRHRD class */ #define ERRnowrite 19 /* read only media */ #define ERRbadunit 20 /* Unknown device */ #define ERRnotready 21 /* Drive not ready */ #define ERRbadcmd 22 /* Unknown command */ #define ERRdata 23 /* Data (CRC) error */ #define ERRbadreq 24 /* Bad request structure length */ #define ERRseek 25 #define ERRbadmedia 26 #define ERRbadsector 27 #define ERRnopaper 28 #define ERRwrite 29 /* write fault */ #define ERRread 30 /* read fault */ #define ERRgeneral 31 /* General hardware failure */ #define ERRwrongdisk 34 #define ERRFCBunavail 35 #define ERRsharebufexc 36 /* share buffer exceeded */ #define ERRdiskfull 39 /* * Access modes when opening a file */ #define SMB_ACCMASK 0x0003 #define SMB_O_RDONLY 0x0000 #define SMB_O_WRONLY 0x0001 #define SMB_O_RDWR 0x0002 /* offsets into message for common items */ #define smb_com 8 #define smb_rcls 9 #define smb_reh 10 #define smb_err 11 #define smb_flg 13 #define smb_flg2 14 #define smb_reb 13 #define smb_tid 28 #define smb_pid 30 #define smb_uid 32 #define smb_mid 34 #define smb_wct 36 #define smb_vwv 37 #define smb_vwv0 37 #define smb_vwv1 39 #define smb_vwv2 41 #define smb_vwv3 43 #define smb_vwv4 45 #define smb_vwv5 47 #define smb_vwv6 49 #define smb_vwv7 51 #define smb_vwv8 53 #define smb_vwv9 55 #define smb_vwv10 57 #define smb_vwv11 59 #define smb_vwv12 61 #define smb_vwv13 63 #define smb_vwv14 65 /* these are the trans2 sub fields for primary requests */ #define smb_tpscnt smb_vwv0 #define smb_tdscnt smb_vwv1 #define smb_mprcnt smb_vwv2 #define smb_mdrcnt smb_vwv3 #define smb_msrcnt smb_vwv4 #define smb_flags smb_vwv5 #define smb_timeout smb_vwv6 #define smb_pscnt smb_vwv9 #define smb_psoff smb_vwv10 #define smb_dscnt smb_vwv11 #define smb_dsoff smb_vwv12 #define smb_suwcnt smb_vwv13 #define smb_setup smb_vwv14 #define smb_setup0 smb_setup #define smb_setup1 (smb_setup+2) #define smb_setup2 (smb_setup+4) /* these are for the secondary requests */ #define smb_spscnt smb_vwv2 #define smb_spsoff smb_vwv3 #define smb_spsdisp smb_vwv4 #define smb_sdscnt smb_vwv5 #define smb_sdsoff smb_vwv6 #define smb_sdsdisp smb_vwv7 #define smb_sfid smb_vwv8 /* and these for responses */ #define smb_tprcnt smb_vwv0 #define smb_tdrcnt smb_vwv1 #define smb_prcnt smb_vwv3 #define smb_proff smb_vwv4 #define smb_prdisp smb_vwv5 #define smb_drcnt smb_vwv6 #define smb_droff smb_vwv7 #define smb_drdisp smb_vwv8 /* the complete */ #define SMBmkdir 0x00 /* create directory */ #define SMBrmdir 0x01 /* delete directory */ #define SMBopen 0x02 /* open file */ #define SMBcreate 0x03 /* create file */ #define SMBclose 0x04 /* close file */ #define SMBflush 0x05 /* flush file */ #define SMBunlink 0x06 /* delete file */ #define SMBmv 0x07 /* rename file */ #define SMBgetatr 0x08 /* get file attributes */ #define SMBsetatr 0x09 /* set file attributes */ #define SMBread 0x0A /* read from file */ #define SMBwrite 0x0B /* write to file */ #define SMBlock 0x0C /* lock byte range */ #define SMBunlock 0x0D /* unlock byte range */ #define SMBctemp 0x0E /* create temporary file */ #define SMBmknew 0x0F /* make new file */ #define SMBchkpth 0x10 /* check directory path */ #define SMBexit 0x11 /* process exit */ #define SMBlseek 0x12 /* seek */ #define SMBtcon 0x70 /* tree connect */ #define SMBtconX 0x75 /* tree connect and X*/ #define SMBtdis 0x71 /* tree disconnect */ #define SMBnegprot 0x72 /* negotiate protocol */ #define SMBdskattr 0x80 /* get disk attributes */ #define SMBsearch 0x81 /* search directory */ #define SMBsplopen 0xC0 /* open print spool file */ #define SMBsplwr 0xC1 /* write to print spool file */ #define SMBsplclose 0xC2 /* close print spool file */ #define SMBsplretq 0xC3 /* return print queue */ #define SMBsends 0xD0 /* send single block message */ #define SMBsendb 0xD1 /* send broadcast message */ #define SMBfwdname 0xD2 /* forward user name */ #define SMBcancelf 0xD3 /* cancel forward */ #define SMBgetmac 0xD4 /* get machine name */ #define SMBsendstrt 0xD5 /* send start of multi-block message */ #define SMBsendend 0xD6 /* send end of multi-block message */ #define SMBsendtxt 0xD7 /* send text of multi-block message */ /* Core+ protocol */ #define SMBlockread 0x13 /* Lock a range and read */ #define SMBwriteunlock 0x14 /* Unlock a range then write */ #define SMBreadbraw 0x1a /* read a block of data with no smb header */ #define SMBwritebraw 0x1d /* write a block of data with no smb header */ #define SMBwritec 0x20 /* secondary write request */ #define SMBwriteclose 0x2c /* write a file then close it */ /* dos extended protocol */ #define SMBreadBraw 0x1A /* read block raw */ #define SMBreadBmpx 0x1B /* read block multiplexed */ #define SMBreadBs 0x1C /* read block (secondary response) */ #define SMBwriteBraw 0x1D /* write block raw */ #define SMBwriteBmpx 0x1E /* write block multiplexed */ #define SMBwriteBs 0x1F /* write block (secondary request) */ #define SMBwriteC 0x20 /* write complete response */ #define SMBsetattrE 0x22 /* set file attributes expanded */ #define SMBgetattrE 0x23 /* get file attributes expanded */ #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */ #define SMBtrans 0x25 /* transaction - name, bytes in/out */ #define SMBtranss 0x26 /* transaction (secondary request/response) */ #define SMBioctl 0x27 /* IOCTL */ #define SMBioctls 0x28 /* IOCTL (secondary request/response) */ #define SMBcopy 0x29 /* copy */ #define SMBmove 0x2A /* move */ #define SMBecho 0x2B /* echo */ #define SMBopenX 0x2D /* open and X */ #define SMBreadX 0x2E /* read and X */ #define SMBwriteX 0x2F /* write and X */ #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */ #define SMBtconX 0x75 /* tree connect and X */ #define SMBffirst 0x82 /* find first */ #define SMBfunique 0x83 /* find unique */ #define SMBfclose 0x84 /* find close */ #define SMBinvalid 0xFE /* invalid command */ /* Extended 2.0 protocol */ #define SMBtrans2 0x32 /* TRANS2 protocol set */ #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */ #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */ #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */ #define SMBulogoffX 0x74 /* user logoff */ /* these are the TRANS2 sub commands */ #define TRANSACT2_OPEN 0 #define TRANSACT2_FINDFIRST 1 #define TRANSACT2_FINDNEXT 2 #define TRANSACT2_QFSINFO 3 #define TRANSACT2_SETFSINFO 4 #define TRANSACT2_QPATHINFO 5 #define TRANSACT2_SETPATHINFO 6 #define TRANSACT2_QFILEINFO 7 #define TRANSACT2_SETFILEINFO 8 #define TRANSACT2_FSCTL 9 #define TRANSACT2_IOCTL 10 #define TRANSACT2_FINDNOTIFYFIRST 11 #define TRANSACT2_FINDNOTIFYNEXT 12 #define TRANSACT2_MKDIR 13 /* Information Levels - Shared? */ #define SMB_INFO_STANDARD 1 #define SMB_INFO_QUERY_EA_SIZE 2 #define SMB_INFO_QUERY_EAS_FROM_LIST 3 #define SMB_INFO_QUERY_ALL_EAS 4 #define SMB_INFO_IS_NAME_VALID 6 /* Information Levels - TRANSACT2_FINDFIRST */ #define SMB_FIND_FILE_DIRECTORY_INFO 0x101 #define SMB_FIND_FILE_FULL_DIRECTORY_INFO 0x102 #define SMB_FIND_FILE_NAMES_INFO 0x103 #define SMB_FIND_FILE_BOTH_DIRECTORY_INFO 0x104 /* Information Levels - TRANSACT2_QPATHINFO */ #define SMB_QUERY_FILE_BASIC_INFO 0x101 #define SMB_QUERY_FILE_STANDARD_INFO 0x102 #define SMB_QUERY_FILE_EA_INFO 0x103 #define SMB_QUERY_FILE_NAME_INFO 0x104 #define SMB_QUERY_FILE_ALL_INFO 0x107 #define SMB_QUERY_FILE_ALT_NAME_INFO 0x108 #define SMB_QUERY_FILE_STREAM_INFO 0x109 #define SMB_QUERY_FILE_COMPRESSION_INFO 0x10b /* Information Levels - TRANSACT2_SETFILEINFO */ #define SMB_SET_FILE_BASIC_INFO 0x101 #define SMB_SET_FILE_DISPOSITION_INFO 0x102 #define SMB_SET_FILE_ALLOCATION_INFO 0x103 #define SMB_SET_FILE_END_OF_FILE_INFO 0x104 /* smb_flg field flags */ #define SMB_FLAGS_SUPPORT_LOCKREAD 0x01 #define SMB_FLAGS_CLIENT_BUF_AVAIL 0x02 #define SMB_FLAGS_RESERVED 0x04 #define SMB_FLAGS_CASELESS_PATHNAMES 0x08 #define SMB_FLAGS_CANONICAL_PATHNAMES 0x10 #define SMB_FLAGS_REQUEST_OPLOCK 0x20 #define SMB_FLAGS_REQUEST_BATCH_OPLOCK 0x40 #define SMB_FLAGS_REPLY 0x80 /* smb_flg2 field flags (samba-2.2.0/source/include/smb.h) */ #define SMB_FLAGS2_LONG_PATH_COMPONENTS 0x0001 #define SMB_FLAGS2_EXTENDED_ATTRIBUTES 0x0002 #define SMB_FLAGS2_DFS_PATHNAMES 0x1000 #define SMB_FLAGS2_READ_PERMIT_NO_EXECUTE 0x2000 #define SMB_FLAGS2_32_BIT_ERROR_CODES 0x4000 #define SMB_FLAGS2_UNICODE_STRINGS 0x8000 /* * UNIX stuff (from samba trans2.h) */ #define MIN_UNIX_INFO_LEVEL 0x200 #define MAX_UNIX_INFO_LEVEL 0x2FF #define SMB_FIND_FILE_UNIX 0x202 #define SMB_QUERY_FILE_UNIX_BASIC 0x200 #define SMB_QUERY_FILE_UNIX_LINK 0x201 #define SMB_QUERY_FILE_UNIX_HLINK 0x202 #define SMB_SET_FILE_UNIX_BASIC 0x200 #define SMB_SET_FILE_UNIX_LINK 0x201 #define SMB_SET_FILE_UNIX_HLINK 0x203 #define SMB_QUERY_CIFS_UNIX_INFO 0x200 /* values which means "don't change it" */ #define SMB_MODE_NO_CHANGE 0xFFFFFFFF #define SMB_UID_NO_CHANGE 0xFFFFFFFF #define SMB_GID_NO_CHANGE 0xFFFFFFFF #define SMB_TIME_NO_CHANGE 0xFFFFFFFFFFFFFFFFULL #define SMB_SIZE_NO_CHANGE 0xFFFFFFFFFFFFFFFFULL /* UNIX filetype mappings. */ #define UNIX_TYPE_FILE 0 #define UNIX_TYPE_DIR 1 #define UNIX_TYPE_SYMLINK 2 #define UNIX_TYPE_CHARDEV 3 #define UNIX_TYPE_BLKDEV 4 #define UNIX_TYPE_FIFO 5 #define UNIX_TYPE_SOCKET 6 #define UNIX_TYPE_UNKNOWN 0xFFFFFFFF #endif /* _SMBNO_H_ */
Copyright 2K16 - 2K18 Indonesian Hacker Rulez
;?>)