| Current Path : /proc/2/root/usr/local/ssl/lib/rpm/ |
| Current File : //proc/2/root/usr/local/ssl/lib/rpm/macros |
#/*! \page config_macros Default configuration: /usr/lib/rpm/macros
# \verbatim
#
# This is a global RPM configuration file. All changes made here will
# be lost when the rpm package is upgraded. Any per-system configuration
# should be added to /etc/rpm/macros, while per-user configuration should
# be added to ~/.rpmmacros.
#
#==============================================================================
# Macro naming conventions (preliminary):
#
# Macros that begin with an underscore are "local" in the sense that
# they (if used) will not be exported in rpm headers. Some macros
# that don't start with an underscore (but look like they should)
# are compatible with macros generated by rpm-2.5.x and will be made
# more consistent in a future release.
#
#==============================================================================
# ---- A macro that expands to nothing.
#
%nil %{!?nil}
#==============================================================================
# ---- filesystem macros.
#
%_usr /usr
%_usrsrc %{_usr}/src
%_var /var
#==============================================================================
# ---- Generally useful path macros.
#
%__awk gawk
%__bzip2 /usr/bin/bzip2
%__cat /bin/cat
%__chgrp /bin/chgrp
%__chmod /bin/chmod
%__chown /bin/chown
%__cp /bin/cp
%__cpio /bin/cpio
%__file /usr/bin/file
%__gpg /usr/bin/gpg
%__grep /bin/grep
%__gzip /usr/bin/gzip
%__id /usr/bin/id
%__install /usr/bin/install
%__ln_s ln -s
# Deprecated, use %__xz instead.
%__lzma %__xz --format=lzma
%__xz /usr/bin/xz
%__make /usr/bin/make
%__mkdir /bin/mkdir
%__mkdir_p /bin/mkdir -p
%__mv /bin/mv
%__patch /usr/bin/patch
%__perl /usr/bin/perl
%__python /usr/bin/python
%__rm /bin/rm
%__rsh /usr/bin/rsh
%__sed /bin/sed
%__ssh /usr/bin/ssh
%__tar /bin/tar
%__unzip /usr/bin/unzip
#==============================================================================
# ---- Build system path macros.
#
%__ar ar
%__as as
%__cc gcc
%__cpp gcc -E
%__cxx g++
%__ld /usr/bin/ld
%__nm /usr/bin/nm
%__objcopy /usr/bin/objcopy
%__objdump /usr/bin/objdump
%__ranlib ranlib
%__remsh %{__rsh}
%__strip /usr/bin/strip
# XXX avoid failures if tools are not installed when rpm is built.
%__libtoolize libtoolize
%__aclocal aclocal
%__autoheader autoheader
%__automake automake
%__autoconf autoconf
#==============================================================================
# Conditional build stuff.
# Check if symbol is defined.
# Example usage: %if %{defined with_foo} && %{undefined with_bar} ...
%defined() %{expand:%%{?%{1}:1}%%{!?%{1}:0}}
%undefined() %{expand:%%{?%{1}:0}%%{!?%{1}:1}}
# Shorthand for %{defined with_...}
%with() %{expand:%%{?with_%{1}:1}%%{!?with_%{1}:0}}
%without() %{expand:%%{?with_%{1}:0}%%{!?with_%{1}:1}}
# Handle conditional builds. %bcond_with is for case when feature is
# default off and needs to be activated with --with ... command line
# switch. %bcond_without is for the dual case.
#
# %bcond_with foo defines symbol with_foo if --with foo was specified on
# command line.
# %bcond_without foo defines symbol with_foo if --without foo was *not*
# specified on command line.
#
# For example (spec file):
#
# (at the beginning)
# %bcond_with extra_fonts
# %bcond_without static
# (and later)
# %if %{with extra_fonts}
# ...
# %else
# ...
# %endif
# %if ! %{with static}
# ...
# %endif
# %ifdef %{with static}
# ...
# %endif
# %{?with_static: ... }
# %{!?with_static: ... }
# %{?with_extra_fonts: ... }
# %{!?with_extra_fonts: ... }
#
# The bottom line: never use without_foo, _with_foo nor _without_foo, only
# with_foo. This way changing default set of bconds for given spec is just
# a matter of changing single line in it and syntax is more readable.
%bcond_with() %{expand:%%{?_with_%{1}:%%global with_%{1} 1}}
%bcond_without() %{expand:%%{!?_without_%{1}:%%global with_%{1} 1}}
#
#==============================================================================
# ---- Required rpmrc macros.
# Macros that used to be initialized as a side effect of rpmrc parsing.
# These are the default values that can be overridden by other
# (e.g. per-platform, per-system, per-packager, per-package) macros.
#
# The directory where rpm's configuration and scripts live
%_rpmconfigdir %{getconfdir}
# The directory where sources/patches will be unpacked and built.
%_builddir %{_topdir}/BUILD
# The interpreter used for build scriptlets.
%_buildshell /bin/sh
# The path to the bzip2 executable (legacy, use %{__bzip2} instead).
%_bzip2bin %{__bzip2}
# The location of the rpm database file(s).
%_dbpath %{_var}/lib/rpm
# The location of the rpm database file(s) after "rpm --rebuilddb".
%_dbpath_rebuild %{_dbpath}
%_keyringpath %{_dbpath}/pubkeys/
#
# Path to script that creates debug symbols in a /usr/lib/debug
# shadow tree.
#
# A spec file can %%define _find_debuginfo_opts to pass options to
# the script. See the script for details.
#
%__debug_install_post \
%{_rpmconfigdir}/find-debuginfo.sh %{?_missing_build_ids_terminate_build:--strict-build-id} %{?_find_debuginfo_opts} "%{_builddir}/%{?buildsubdir}"\
%{nil}
# Template for debug information sub-package.
%debug_package \
%ifnarch noarch\
%global __debug_package 1\
%package debug\
Summary: Debug information for package %{name}\
Group: Development/Debug\
AutoReqProv: 0\
%description debug\
This package provides debug information for package %{name}.\
Debug information is useful when developing applications that use this\
package or when debugging this package.\
%files debug -f debugfiles.list\
%defattr(-,root,root)\
%endif\
%{nil}
%_defaultdocdir %{_datadir}/doc
# The path to the gzip executable (legacy, use %{__gzip} instead).
%_gzipbin %{__gzip}
# The Unix time of the latest kept changelog entry in binary packages.
# Any older entry is not packaged in binary packages.
%_changelog_trimtime 0
# The directory where newly built binary packages will be written.
%_rpmdir %{_topdir}/RPMS
# A template used to generate the output binary package file name
# (legacy).
%_rpmfilename %{_build_name_fmt}
# The default signature type.
%_signature gpg
# The directory where sources/patches from a source package will be
# installed. This is also where sources/patches are found when building.
%_sourcedir %{_topdir}/SOURCES
# The directory where the spec file from a source package will be
# installed.
%_specdir %{_topdir}/SPECS
# The directory where newly built source packages will be written.
%_srcrpmdir %{_topdir}/SRPMS
# The directory where buildroots will be created.
%_buildrootdir %{_topdir}/BUILDROOT
# Build root path, where %install installs the package during build.
%buildroot %{_buildrootdir}/%{name}-%{version}-%{release}.%{_arch}
# Directory where temporaray files can be created.
%_tmppath %{_var}/tmp
# Path to top of build area.
%_topdir %{getenv:HOME}/rpmbuild
# The path to the unzip executable (legacy, use %{__unzip} instead).
%_unzipbin %{__unzip}
#==============================================================================
# ---- Optional rpmrc macros.
# Macros that are initialized as a side effect of rpmrc and/or spec
# file parsing.
#
# The sub-directory (relative to %{_builddir}) where sources are compiled.
# This macro is set after processing %setup, either explicitly from the
# value given to -n or the default name-version.
#
#%buildsubdir
# Configurable distribution information, same as Distribution: tag in a
# specfile.
#
#%distribution
# Configurable distribution URL, same as DistURL: tag in a specfile.
# The URL will be used to supply reliable information to tools like
# rpmfind.
#
# Note: You should not configure with disturl (or build packages with
# the DistURL: tag) unless you are willing to supply content in a
# yet-to-be-determined format at the URL specified.
#
#%disturl
# Configurable bug URL, same as BugURL: tag in a specfile.
# The URL will be used to supply reliable information to where
# to file bugs.
#
#%bugurl
# Boolean (i.e. 1 == "yes", 0 == "no") that controls whether files
# marked as %doc should be installed.
#%_excludedocs
# The port and machine name of a FTP proxy host running TIS firewall.
#
#%_ftpport
#%_ftpproxy
# The signature to use and the location of configuration files for
# signing packages with GNU gpg.
#
#%_gpg_name
#%_gpg_path
# The port and machine name of an HTTP proxy host.
#
#%_httpport
#%_httpproxy
# The PATH put into the environment before running %pre/%post et al.
#
%_install_script_path /sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin
# A colon separated list of desired locales to be installed;
# "all" means install all locale specific files.
#
%_install_langs all
# The value of CLASSPATH in build scriptlets (iff configured).
#
#%_javaclasspath all
# Import packaging conventions from jpackage.org (prefixed with _
# to avoid name collisions).
#
%_javadir %{_datadir}/java
%_javadocdir %{_datadir}/javadoc
# A colon separated list of paths where files should *not* be installed.
# Usually, these are network file system mount points.
#
#%_netsharedpath
# (experimental)
# The type of pattern match used on rpmdb iterator selectors:
# "default" simple glob-like regex, periods will be escaped,
# splats will have period prepended, full "^...$" match
# required. Also, file path tags will use glob(7).
# "strcmp" compare strings
# "regex" regex(7) patterns using regcomp(3)/regexec(3)
# "glob" glob(7) patterns using fnmatch(3)
#
%_query_selector_match default
# Configurable packager information, same as Packager: in a specfile.
#
#%packager
# Compression type and level for source/binary package payloads.
# "w9.gzdio" gzip level 9 (default).
# "w9.bzdio" bzip2 level 9.
# "w7.xzdio" xz level 7, xz's default.
# "w7.lzdio" lzma-alone level 7, lzma's default
#
#%_source_payload w9.gzdio
#%_binary_payload w9.gzdio
# Algorithm to use for generating file checksum digests on build.
# If not specified or 0, MD5 is used.
# WARNING: non-MD5 is backwards incompatible, don't enable lightly!
# The supported algorithms may depend on NSS version, as of NSS
# 3.11.99.5 the following are supported:
# 1 MD5 (default)
# 2 SHA1
# 8 SHA256
# 9 SHA384
# 10 SHA512
#
#%_source_filedigest_algorithm 1
#%_binary_filedigest_algorithm 1
# Configurable vendor information, same as Vendor: in a specfile.
#
#%vendor
# Default fuzz level for %patch in spec file.
%_default_patch_fuzz 0
# Default patch flags
#%_default_patch_flags -s
#==============================================================================
# ---- Build configuration macros.
#
# Script gets packaged file list on input and buildroot as first parameter.
# Returns list of unpackaged files, i.e. files in $RPM_BUILD_ROOT not packaged.
#
# Note: Disable (by commenting out) for legacy compatibility.
%__check_files %{_rpmconfigdir}/check-files %{buildroot}
#
# Should unpackaged files in a build root terminate a build?
#
# Note: The default value should be 0 for legacy compatibility.
%_unpackaged_files_terminate_build 1
#
# Should missing %doc files in the build directory terminate a build?
#
# Note: The default value should be 0 for legacy compatibility.
%_missing_doc_files_terminate_build 1
#
# Should binaries in noarch packages terminate a build?
%_binaries_in_noarch_packages_terminate_build 1
#
# Program to call for each successfully built and written binary package.
# The package name is passed to the program as a command-line argument.
#
#%_build_pkgcheck %{_bindir}/rpmlint
#
# Program to call for the whole binary package set after build.
# The package set is passed to the program via command-line arguments.
#
#%_build_pkgcheck_set %{_bindir}/rpmlint
#
# Program to call for successfully built and written SRPM.
# The package name is passed to the program as a command-line argument.
#
#%_build_pkgcheck_srpm %{_bindir}/rpmlint
#
# Should the build of packages fail if package checker (if defined) returns
# non-zero exit status?
#
#%_nonzero_exit_pkgcheck_terminate_build 1
#
# Should an ELF file processed by find-debuginfo.sh having no build ID
# terminate a build? This is left undefined to disable it and defined to
# enable.
#
#%_missing_build_ids_terminate_build 1
#
# Use internal dependency generator rather than external helpers?
%_use_internal_dependency_generator 1
#
# Filter GLIBC_PRIVATE Provides: and Requires:
%_filter_GLIBC_PRIVATE 0
# Desired selinux policy tree
%__policy_tree %{expand:%%global __policy_tree %{lua:\
t="targeted"\
f = io.open("/etc/selinux/config")\
if f then\
for l in f:lines() do\
if "SELINUXTYPE=" == string.sub(l,0,12) then t=string.sub(l,13); end\
end\
f:close()\
end\
print (t)\
}}%{__policy_tree}
# Path to selinux file context patterns.
%__file_context_path /etc/selinux/%{__policy_tree}/contexts/files/file_contexts
# Directories whose contents should be considered as documentation.
%__docdir_path %{_datadir}/doc:%{_datadir}/man:%{_datadir}/info:%{_datadir}/gtk-doc/html:%{?_docdir}:%{?_mandir}:%{?_infodir}:%{?_javadocdir}:/usr/doc:/usr/man:/usr/info:/usr/X11R6/man
#
# Path to selinux file context patterns used to add
# RPMTAG_FILECONTEXTS to packages when building.
#
# Undefined, missing or %{nil} will disable.
%_build_file_context_path %{nil}
#
# Path to selinux file context patterns used to set
# (or override package content) file contexts when installing.
#
# Undefined, missing or %{nil} will use package content (if available).
%_install_file_context_path %{__file_context_path}
#
# Path to selinux file context patterns used to verify
# file contexts on file system.
#
# Undefined, missing or %{nil} will use package content (if available).
%_verify_file_context_path %{__file_context_path}
#
# Path to scripts to autogenerate package dependencies,
#
# Note: Used iff _use_internal_dependency_generator is zero.
#%__find_provides %{_rpmconfigdir}/rpmdeps --provides
#%__find_requires %{_rpmconfigdir}/rpmdeps --requires
%__find_provides %{_rpmconfigdir}/find-provides
%__find_requires %{_rpmconfigdir}/find-requires
#%__find_conflicts ???
#%__find_obsoletes ???
#
# Path to scripts to autogenerate per-interpreter package dependencies.
# If the script supports extra options they can be passed by defining
# <helper_macro>_opts macro(s), eg in spec:
# %define __ocaml_requires_opts -i Warnings
#
# Note: Used iff _use_internal_dependency_generator is non-zero. The
# helpers are also used by %{_rpmconfigdir}/rpmdeps {--provides|--requires}.
#%__perl_provides %{_rpmconfigdir}/perldeps.pl --provides
#%__perl_requires %{_rpmconfigdir}/perldeps.pl --requires
%__perl_provides %{_rpmconfigdir}/perl.prov
%__perl_requires %{_rpmconfigdir}/perl.req
%__python_provides %{_rpmconfigdir}/pythondeps.sh --provides
%__python_requires %{_rpmconfigdir}/pythondeps.sh --requires
%__mono_provides %{_rpmconfigdir}/mono-find-provides %{_builddir}/%{?buildsubdir} %{buildroot} %{_libdir}
%__mono_requires %{_rpmconfigdir}/mono-find-requires %{_builddir}/%{?buildsubdir} %{buildroot} %{_libdir}
%__libtool_provides %{_rpmconfigdir}/libtooldeps.sh --provides %{buildroot} %{name}
%__libtool_requires %{_rpmconfigdir}/libtooldeps.sh --requires %{buildroot} %{name}
%__pkgconfig_provides %{_rpmconfigdir}/pkgconfigdeps.sh --provides
%__pkgconfig_requires %{_rpmconfigdir}/pkgconfigdeps.sh --requires
%__ocaml_provides %{_rpmconfigdir}/ocaml-find-provides.sh
%__ocaml_requires %{_rpmconfigdir}/ocaml-find-requires.sh
%__fontconfig_provides %{_rpmconfigdir}/fontconfig.prov
%__desktop_provides %{_rpmconfigdir}/desktop-file.prov
#==============================================================================
# ---- Database configuration macros.
# Macros used to configure Berkley db parameters.
#
# rpmdb macro configuration values are a colon (or white space) separated
# list of tokens, with an optional '!' negation to explicitly disable bit
# values, or a "=value" if a parameter. A per-tag value is used (e.g.
# %_dbi_config_Packages) if defined, otherwise a per-rpmdb default
# (e.g. %_dbi_config). The configuration is also conditioned on the
# existence of an internal %{_rpmdb_rebuild} switch to permit changing
# the configuration while rebuilding an rpmdb database.
#
# The rpmdb configuration tokens are in a popt table in rpmdb/dbconfig.c,
# see that for the latest gory details. Note carefully that, unless you
# are writing an rpm installer, you shouldn't have to touch *any* of these
# parameters.
#
# Here's a short list of the tokens, with a guess of whether the option is
# useful:
# (nothing) currently used in rpm, known to work.
# "+++" under development, will be supported in rpm eventually.
# "???" I have no clue, you're mostly on your own.
#
# If you do find yourself inclined to fiddle, here's what I see (shrug):
# 1) Only the value of mp_size has any serious impact on overall performance,
# and you will need ~256Kb to handle a typical machine install.
# 2) Only the Packages hash, because of the size of the values (i.e. headers),
# will ever need tuning. Diddle the pagesize if you're interested, although
# I believe that you will find pagesize=512 "best".
# 3) Adding nofsync increases speed, but risks total data loss. Fiddle shared
# and/or mp_size instead.
# 4) btree is faster than hash, but would require some painful rpm release
# engineering to convert everbody's databases to btree, not gonna happen
# soon.
#
# See the db3-devel package, or http://www.sleepycat.com for Berkeley db-3.x
# documentation.
#
# token works? Berkeley db flag or value
#==================================================
#---------------------- DBENV->open parameters and tunable values:
# mmapsize=16Mb DBENV->set_mp_mmapsize
# cachesize=1Mb DBENV->set_cachesize, DB->set_cachesize
#---------------------- DBENV->open and DB->open common bits:
# create DB_CREATE
# thread ??? DB_THREAD (useless w/o posix mutexes on linux)
#---------------------- DBENV->open bits:
# joinenv DB_JOIN_ENV
# mpool DB_INIT_MPOOL
# cdb +++ DB_INIT_CDB
# txn ??? DB_INIT_TXN
# log ??? DB_INIT_LOG
# lock ??? DB_INIT_LOCK
# recover ??? DB_RECOVER
# recover_fatal ??? DB_RECOVER_FATAL
# use_environ ??? DB_USE_ENVIRON
# use_environ_root ??? DB_USE_ENVIRON_ROOT
# private +++ DB_PRIVATE
# lockdown ??? DB_LOCKDOWN
# shared +++ DB_SYSTEM_MEM
#---------------------- DB->open parameters and tunable values:
# pagesize=512 +++ DB->set_pagesize
#---------------------- DB->open bits:
# excl ??? DB_EXCL
# nommap ??? DB_NOMMAP
# rdonly DB_RDONLY
#---------------------- DB->open types:
# btree DB_BTREE
# hash DB_HASH
# recno ??? DB_RECNO
# queue ??? DB_QUEUE
# unknown +++ DB_UNKNOWN
#---------------------- DB->set_flags bits:
# bt_dup +++ (btree only) DB_DUP
# bt_dupsort +++ (btree only) DB_DUPSORT
# ht_dup +++ (hash only) DB_DUP
# ht_dupsort +++ (hash only) DB_DUPSORT
#----------------------- rpmdb specific configuration:
# usedbenv (always on) Use db3 environment?
# verify (db3 only) Verify Packages db after RW close?
# lockdbfd (always on for Packages) Use fcntl(2) locking ?
# nofsync Disable fsync(2) call performed after db3 writes?
# temporary Unlink file when closing.
#
# XXX Use transactions and logs for rpmdb durability (no clue yet):
#%__dbi_other create joinenv mpool txn log \
# mp_mmapsize=8Mb mp_size=512Kb
# Use a CDB database model for concurrent access.
# XXX Add "private" here for legacy interoperation transiting to glibc+nptl.
%__dbi_cdb create cdb mpool mp_mmapsize=16Mb mp_size=1Mb
%__dbi_other %{?_tmppath:tmpdir=%{_tmppath}} %{?__dbi_cdb}
# Note: adding nofsync here speeds up --rebuilddb a lot.
%__dbi_rebuild nofsync !log !txn !cdb
%__dbi_transient %{__dbi_rebuild} temporary private
%__dbi_perms perms=0644
#
#--- Hash database configuration
%__dbi_htconfig \
hash \
%{__dbi_other}\
%{__dbi_perms}\
%{nil}
%__dbi_htconfig_current %{__dbi_htconfig}
%__dbi_htconfig_rebuild %{__dbi_htconfig} %{__dbi_rebuild}
%_dbi_htconfig \
%{?_rpmdb_rebuild:%{__dbi_htconfig_rebuild}}\
%{!?_rpmdb_rebuild:%{__dbi_htconfig_current}}\
%{nil}
#
#--- Btree database configuration
%__dbi_btconfig \
btree \
%{__dbi_other}\
%{__dbi_perms}\
%{nil}
%__dbi_btconfig_current %{__dbi_btconfig}
%__dbi_btconfig_rebuild %{__dbi_btconfig} %{__dbi_rebuild}
%_dbi_btconfig \
%{?_rpmdb_rebuild:%{__dbi_btconfig_rebuild}}\
%{!?_rpmdb_rebuild:%{__dbi_btconfig_current}}\
%{nil}
# The list of tags for which indices will be built.
%_dbi_tags Packages:Name:Basenames:Group:Requirename:Providename:Conflictname:Obsoletename:Triggername:Dirnames:Requireversion:Provideversion:Installtid:Sigmd5:Sha1header:Filedigests:Depends:Pubkeys
# "Packages" should have shared/exclusive fcntl(2) lock using "lockdbfd".
%_dbi_config_Packages %{_dbi_htconfig} lockdbfd
# "Depends" is a per-transaction cache of known dependency resolutions.
%_dbi_config_Depends %{_dbi_htconfig} temporary private
%_dbi_config_Dirnames %{_dbi_btconfig}
%_dbi_config_Requireversion %{_dbi_btconfig}
%_dbi_config_Provideversion %{_dbi_btconfig}
%_dbi_config_Installtid %{_dbi_btconfig}
%_dbi_config_Removetid %{_dbi_btconfig}
%_dbi_config %{_dbi_htconfig}
# XXX legacy configuration.
# Choose db interface:
# 3 native db3 interface.
#
# There are two macros so that --rebuilddb can convert db1 -> db3.
#
%_dbapi 3
%_dbapi_rebuild 3
#==============================================================================
# ---- GPG/PGP/PGP5 signature macros.
# Macro(s) to hold the arguments passed to GPG/PGP for package
# signing and verification.
#
%__gpg_check_password_cmd %{__gpg} \
gpg --batch --no-verbose --passphrase-fd 3 -u "%{_gpg_name}" -so -
%__gpg_sign_cmd %{__gpg} \
gpg --batch --no-verbose --no-armor --passphrase-fd 3 --no-secmem-warning \
-u "%{_gpg_name}" -sbo %{__signature_filename} %{__plaintext_filename}
# XXX rpm >= 4.1 verifies signatures internally
#%__gpg_verify_cmd %{__gpg} \
# gpg --batch --no-verbose --verify --no-secmem-warning \
# %{__signature_filename} %{__plaintext_filename}
#
# XXX rpm-4.1 verifies prelinked libraries using a prelink undo helper.
# Normally this macro is defined in /etc/rpm/macros.prelink, installed
# with the prelink package. If the macro is undefined, then prelinked
# shared libraries contents are MD5 digest verified (as usual), rather
# than MD5 verifying the output of the prelink undo helper.
#
# Note: The 2nd token is used as argv[0] and "library" is a
# placeholder that will be deleted and replaced with the appropriate
# library file path.
#%__prelink_undo_cmd /usr/sbin/prelink prelink -y library
# Horowitz Key Protocol server configuration
#
%_hkp_keyserver http://pgp.mit.edu
%_hkp_keyserver_query %{_hkp_keyserver}:11371/pks/lookup?op=get&search=0x
#==============================================================================
# ---- Transaction macros.
# Macro(s) used to parameterize transactions.
#
# The output binary package file name template used when building
# binary packages.
#
# XXX Note: escaped %% for use in headerSprintf()
%_build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm
# The default transaction color. This value is a set of bits to
# determine file and dependency affinity for this arch.
# 0 uncolored (i.e. use only arch as install hint)
# 1 Elf32 permitted
# 2 Elf64 permitted
%_transaction_color 3
# Verify digest/signature flags for various rpm modes:
# 0x30300 (_RPMVSF_NODIGESTS) --nohdrchk if set, don't check digest(s)
# 0xc0c00 (_RPMVSF_NOSIGNATURES) --nosignature if set, don't check signature(s)
# 0xf0000 (_RPMVSF_NOPAYLOAD) --nolegacy if set, check header+payload (if possible)
# 0x00f00 (_RPMVSF_NOHEADER) --nohdrchk if set, don't check rpmdb headers
#
# For example, the value 0xf0c00 (=0xf0000+0xc0c00) disables legacy
# digest/signature checking, disables signature checking, but attempts
# digest checking, also when retrieving headers from the database.
#
# You also can do:
# >>> hex(rpm._RPMVSF_NOSIGNATURES)
# '0xc0c00'
# or:
# >>> hex(rpm._RPMVSF_NOSIGNATURES|rpm._RPMVSF_NOPAYLOAD)
# '0xf0c00'
# at the python prompt for example, after "import rpm".
#
# The checking overhead is ~11ms per header for digests/signatures;
# each header from the database is checked only when first encountered
# for each database open.
#
# Note: the %_vsflags_erase applies to --upgrade/--freshen modes as
# well as --erase.
#
%__vsflags 0xf0000
%_vsflags_build %{__vsflags}
%_vsflags_erase %{__vsflags}
%_vsflags_install %{__vsflags}
%_vsflags_query %{__vsflags}
%_vsflags_rebuilddb %{__vsflags}
%_vsflags_verify %{__vsflags}
# Relations between package names that cause dependency loops
# with legacy packages that cannot be fixed. Relations are
# specified as
# p>q
# where package p has a Requires: on something that package q Provides:
#
# XXX Note: that there cannot be any whitespace within the string "p>q",
# and that both p and q are package names (i.e. no version/release).
#
%_dependency_whiteout \
%{nil}
#
# Default output format string for rpm -qa
#
# XXX Note: escaped %% for use in headerFormat()
%_query_all_fmt %%{nvra}
#
# Default path to the file used for transaction fcntl lock.
%_rpmlock_path %{_dbpath}/.rpm.lock
#==============================================================================
# ---- per-platform macros.
# Macros that are specific to an individual platform. The values here
# will be used if the per-platform macro file does not exist..
#
%_arch x86_64
%_build_arch x86_64
%_vendor redhat
%_os linux
%_gnu -gnu
%_target_platform %{_target_cpu}-%{_vendor}-%{_target_os}%{?_gnu}
#
# Define a generic value for optflags. Normally overridden by per-target macros.
%optflags -O2
#
# ISA dependency marker, none for noarch and name-bitness for others
%_isa %{?__isa:(%{__isa})}%{!?__isa:%{nil}}
#
# Define per-arch and per-os defaults. Normally overridden by per-target macros.
%__arch_install_post %{nil}
%__os_install_post %{___build_post}
#==============================================================================
# ---- Scriptlet template templates.
# Global defaults used for building scriptlet templates.
#
%___build_shell %{?_buildshell:%{_buildshell}}%{!?_buildshell:/bin/sh}
%___build_args -e
%___build_cmd %{?_sudo:%{_sudo} }%{?_remsh:%{_remsh} %{_remhost} }%{?_remsudo:%{_remsudo} }%{?_remchroot:%{_remchroot} %{_remroot} }%{___build_shell} %{___build_args}
%___build_pre \
RPM_SOURCE_DIR=\"%{u2p:%{_sourcedir}}\"\
RPM_BUILD_DIR=\"%{u2p:%{_builddir}}\"\
RPM_OPT_FLAGS=\"%{optflags}\"\
RPM_ARCH=\"%{_arch}\"\
RPM_OS=\"%{_os}\"\
export RPM_SOURCE_DIR RPM_BUILD_DIR RPM_OPT_FLAGS RPM_ARCH RPM_OS\
RPM_DOC_DIR=\"%{_docdir}\"\
export RPM_DOC_DIR\
RPM_PACKAGE_NAME=\"%{name}\"\
RPM_PACKAGE_VERSION=\"%{version}\"\
RPM_PACKAGE_RELEASE=\"%{release}\"\
export RPM_PACKAGE_NAME RPM_PACKAGE_VERSION RPM_PACKAGE_RELEASE\
LANG=C\
export LANG\
unset CDPATH DISPLAY ||:\
%{?buildroot:RPM_BUILD_ROOT=\"%{u2p:%{buildroot}}\"\
export RPM_BUILD_ROOT}\
%{?_javaclasspath:CLASSPATH=\"%{_javaclasspath}\"\
export CLASSPATH}\
PKG_CONFIG_PATH=\"${PKG_CONFIG_PATH}:%{_libdir}/pkgconfig:%{_datadir}/pkgconfig\"\
export PKG_CONFIG_PATH\
\
%{verbose:set -x}%{!verbose:exec > /dev/null}\
umask 022\
cd \"%{u2p:%{_builddir}}\"\
#%___build_body %{nil}
%___build_post exit 0
%___build_template #!%{___build_shell}\
%{___build_pre}\
%{nil}
#%{___build_body}\
#%{___build_post}\
#%{nil}
#==============================================================================
# ---- Scriptlet templates.
# Macro(s) that expand to a command and script that is executed.
# CAVEAT: All macro expansions must fit in a BUFSIZ (8192 byte) buffer.
#
%__spec_prep_shell %{___build_shell}
%__spec_prep_args %{___build_args}
%__spec_prep_cmd %{___build_cmd}
%__spec_prep_pre %{___build_pre}
%__spec_prep_body %{___build_body}
%__spec_prep_post %{___build_post}
%__spec_prep_template #!%{__spec_prep_shell}\
%{__spec_prep_pre}\
%{nil}
#%{__spec_prep_body}\
#%{__spec_prep_post}\
#%{nil}
%__spec_build_shell %{___build_shell}
%__spec_build_args %{___build_args}
%__spec_build_cmd %{___build_cmd}
%__spec_build_pre %{___build_pre}
%__spec_build_body %{___build_body}
%__spec_build_post %{___build_post}
%__spec_build_template #!%{__spec_build_shell}\
%{__spec_build_pre}\
%{nil}
#%{__spec_build_body}\
#%{__spec_build_post}\
#%{nil}
%__spec_install_shell %{___build_shell}
%__spec_install_args %{___build_args}
%__spec_install_cmd %{___build_cmd}
%__spec_install_pre %{___build_pre}
%__spec_install_body %{___build_body}
%__spec_install_post\
%{?__debug_package:%{__debug_install_post}}\
%{__arch_install_post}\
%{__os_install_post}\
%{nil}
%__spec_install_template #!%{__spec_install_shell}\
%{__spec_install_pre}\
%{nil}
#%{__spec_install_body}\
#%{__spec_install_post}\
#%{nil}
%__spec_check_shell %{___build_shell}
%__spec_check_args %{___build_args}
%__spec_check_cmd %{___build_cmd}
%__spec_check_pre %{___build_pre}
%__spec_check_body %{___build_body}
%__spec_check_post %{___build_post}
%__spec_check_template #!%{__spec_check_shell}\
%{__spec_check_pre}\
%{nil}
#%{__spec_check_body}\
#%{__spec_check_post}\
#%{nil}
#%__spec_autodep_shell %{___build_shell}
#%__spec_autodep_args %{___build_args}
#%__spec_autodep_cmd %{___build_cmd}
#%__spec_autodep_pre %{___build_pre}
#%__spec_autodep_body %{___build_body}
#%__spec_autodep_post %{___build_post}
#%__spec_autodep_template #!%{__spec_autodep_shell}\
#%{__spec_autodep_pre}\
#%{nil}
#%{__spec_autodep_body}\
#%{__spec_autodep_post}\
#%{nil}
%__spec_clean_shell %{___build_shell}
%__spec_clean_args %{___build_args}
%__spec_clean_cmd %{___build_cmd}
%__spec_clean_pre %{___build_pre}
%__spec_clean_body %{___build_body}
%__spec_clean_post %{___build_post}
%__spec_clean_template #!%{__spec_clean_shell}\
%{__spec_clean_pre}\
%{nil}
#%{__spec_clean_body}\
#%{__spec_clean_post}\
#%{nil}
%__spec_rmbuild_shell %{___build_shell}
%__spec_rmbuild_args %{___build_args}
%__spec_rmbuild_cmd %{___build_cmd}
%__spec_rmbuild_pre %{___build_pre}
%__spec_rmbuild_body %{___build_body}
%__spec_rmbuild_post %{___build_post}
%__spec_rmbuild_template #!%{__spec_rmbuild_shell}\
%{__spec_rmbuild_pre}\
%{nil}
#%{__spec_rmbuild_body}\
#%{__spec_rmbuild_post}\
#%{nil}
# XXX We don't expand pre/post install scriptlets (yet).
#%__spec_pre_pre %{nil}
#%__spec_pre_post %{nil}
#%__spec_post_pre %{nil}
#%__spec_post_post %{nil}
#%__spec_preun_pre %{nil}
#%__spec_preun_post %{nil}
#%__spec_postun_pre %{nil}
#%__spec_postun_post %{nil}
#%__spec_triggerpostun_pre %{nil}
#%__spec_triggerpostun_post %{nil}
#%__spec_triggerun_pre %{nil}
#%__spec_triggerun_post %{nil}
#%__spec_triggerin_pre %{nil}
#%__spec_triggerin_post %{nil}
#==============================================================================
# ---- configure macros.
# Macro(s) slavishly copied from autoconf's config.status.
#
%_prefix /usr
%_exec_prefix %{_prefix}
%_bindir %{_exec_prefix}/bin
%_sbindir %{_exec_prefix}/sbin
%_libexecdir %{_exec_prefix}/libexec
%_datadir %{_prefix}/share
%_sysconfdir /etc
%_sharedstatedir %{_prefix}/com
%_localstatedir %{_prefix}/var
%_lib lib
%_libdir %{_exec_prefix}/%{_lib}
%_includedir %{_prefix}/include
%_infodir %{_datadir}/info
%_mandir %{_datadir}/man
#==============================================================================
# ---- config.guess platform macros.
# Macro(s) similar to the tokens used by configure.
#
%_build %{_host}
%_build_alias %{_host_alias}
%_build_cpu %{_host_cpu}
%_build_vendor %{_host_vendor}
%_build_os %{_host_os}
%_host x86_64-redhat-linux-gnu
%_host_alias x86_64-redhat-linux-gnu%{nil}
%_host_cpu x86_64
%_host_vendor redhat
%_host_os linux
%_target %{_host}
%_target_alias %{_host_alias}
%_target_cpu %{_host_cpu}
%_target_vendor %{_host_vendor}
%_target_os %{_host_os}
#==============================================================================
# ---- specfile macros.
# Macro(s) here can be used reliably for reproducible builds.
# (Note: Above is the goal, below are the macros under development)
#
# The configure macro runs autoconf configure script with platform specific
# directory structure (--prefix, --libdir etc) and compiler flags
# such as CFLAGS.
#
# The configure macro should be invoked as %configure (rather than %{configure})
# because the rest of the arguments will be expanded using %*.
#
%_configure ./configure
%configure \
CFLAGS="${CFLAGS:-%optflags}" ; export CFLAGS ; \
CXXFLAGS="${CXXFLAGS:-%optflags}" ; export CXXFLAGS ; \
FFLAGS="${FFLAGS:-%optflags}" ; export FFLAGS ; \
%{_configure} --host=%{_host} --build=%{_build} \\\
--program-prefix=%{?_program_prefix} \\\
--prefix=%{_prefix} \\\
--exec-prefix=%{_exec_prefix} \\\
--bindir=%{_bindir} \\\
--sbindir=%{_sbindir} \\\
--sysconfdir=%{_sysconfdir} \\\
--datadir=%{_datadir} \\\
--includedir=%{_includedir} \\\
--libdir=%{_libdir} \\\
--libexecdir=%{_libexecdir} \\\
--localstatedir=%{_localstatedir} \\\
--sharedstatedir=%{_sharedstatedir} \\\
--mandir=%{_mandir} \\\
--infodir=%{_infodir}
#------------------------------------------------------------------------------
# The make install analogue of %configure for modern autotools:
%make_install make install DESTDIR=%{?buildroot}
#------------------------------------------------------------------------------
# Former make install analogue, kept for compatibility and for old/broken
# packages that don't support DESTDIR properly.
%makeinstall \
make \\\
prefix=%{?buildroot:%{buildroot}}%{_prefix} \\\
exec_prefix=%{?buildroot:%{buildroot}}%{_exec_prefix} \\\
bindir=%{?buildroot:%{buildroot}}%{_bindir} \\\
sbindir=%{?buildroot:%{buildroot}}%{_sbindir} \\\
sysconfdir=%{?buildroot:%{buildroot}}%{_sysconfdir} \\\
datadir=%{?buildroot:%{buildroot}}%{_datadir} \\\
includedir=%{?buildroot:%{buildroot}}%{_includedir} \\\
libdir=%{?buildroot:%{buildroot}}%{_libdir} \\\
libexecdir=%{?buildroot:%{buildroot}}%{_libexecdir} \\\
localstatedir=%{?buildroot:%{buildroot}}%{_localstatedir} \\\
sharedstatedir=%{?buildroot:%{buildroot}}%{_sharedstatedir} \\\
mandir=%{?buildroot:%{buildroot}}%{_mandir} \\\
infodir=%{?buildroot:%{buildroot}}%{_infodir} \\\
install
#------------------------------------------------------------------------------
# The GNUconfigure macro does the following:
# update config.guess and config.sub.
# regenerate all autoconf/automake files
# optionally change to a directory (make the directory if requested).
# run configure with correct prefix, platform, and CFLAGS.
# optionally restore current directory.
#
# Based on autogen.sh from GNOME and orginal GNUconfigure
#
%GNUconfigure(MCs:) \
CFLAGS="${CFLAGS:-%optflags}" ; export CFLAGS; \
LDFLAGS="${LDFLAGS:-%{-s:-s}}" ; export LDFLAGS; \
%{-C:_mydir="`pwd`"; %{-M: %{__mkdir} -p %{-C*};} cd %{-C*}} \
dirs="`find ${_mydir} -name configure.in -print`"; export dirs; \
for coin in `echo ${dirs}` \
do \
dr=`dirname ${coin}`; \
if test -f ${dr}/NO-AUTO-GEN; then \
: \
else \
macrodirs=`sed -n -e 's,AM_ACLOCAL_INCLUDE(\(.*\)),\1,gp' < ${coin}`; \
( cd ${dr}; \
aclocalinclude="${ACLOCAL_FLAGS}"; \
for k in ${macrodirs}; do \
if test -d ${k}; then \
aclocalinclude="${aclocalinclude} -I ${k}"; \
##else \
## echo "**Warning**: No such directory \`${k}'. Ignored." \
fi \
done \
if grep "^AM_GNU_GETTEXT" configure.in >/dev/null; then \
if grep "sed.*POTFILES" configure.in >/dev/null; then \
: do nothing -- we still have an old unmodified configure.in \
else \
test -r ${dr}/aclocal.m4 || touch ${dr}/aclocal.m4; \
echo "no" | gettextize --force --copy; \
test -r ${dr}/aclocal.m4 && %{__chmod} u+w ${dr}/aclocal.m4; \
fi \
fi \
if grep "^AM_PROG_LIBTOOL" configure.in >/dev/null; then \
%{__libtoolize} --force --copy; \
fi \
aclocal ${aclocalinclude}; \
if grep "^AM_CONFIG_HEADER" configure.in >/dev/null; then \
%{__autoheader}; \
fi \
echo "Running automake --gnu ${am_opt} ..."; \
%{__automake} --add-missing --gnu ${am_opt}; \
%{__autoconf}; \
); \
fi \
done \
%{-C:${_mydir}}%{!-C:.}/configure --prefix=%{_prefix} --exec-prefix=%{_exec_prefix} --bindir=%{_bindir} --sbindir=%{_sbindir} --sysconfdir=%{_sysconfdir} --datadir=%{_datadir} --includedir=%{_includedir} --libdir=%{_libdir} --libexecdir=%{_libexecdir} --localstatedir=%{_localstatedir} --sharedstatedir=%{_sharedstatedir} --mandir=%{_mandir} --infodir=%{_infodir} %* ; \
%{-C:cd ${_mydir}; unset _mydir}
%patches %{lua: for i, p in ipairs(patches) do print(p.." ") end}
%sources %{lua: for i, s in ipairs(sources) do print(s.." ") end}
#------------------------------------------------------------------------------
# Useful perl macros (from Artur Frysiak <wiget@t17.ds.pwr.wroc.pl>)
#
# For example, these can be used as (from ImageMagick.spec from PLD site)
# [...]
# BuildPrereq: perl
# [...]
# %package perl
# Summary: libraries and modules for access to ImageMagick from perl
# Group: Development/Languages/Perl
# Requires: %{name} = %{version}
# %requires_eq perl
# [...]
# %install
# rm -fr $RPM_BUILD_ROOT
# install -d $RPM_BUILD_ROOT/%{perl_sitearch}
# [...]
# %files perl
# %defattr(644,root,root,755)
# %{perl_sitearch}/Image
# %dir %{perl_sitearch}/auto/Image
#
%requires_eq() %(LC_ALL="C" echo '%*' | xargs -r rpm -q --qf 'Requires: %%{name} = %%{epoch}:%%{version}\\n' | sed -e 's/ (none):/ /' -e 's/ 0:/ /' | grep -v "is not")
%perl_sitearch %(eval "`%{__perl} -V:installsitearch`"; echo $installsitearch)
%perl_sitelib %(eval "`%{__perl} -V:installsitelib`"; echo $installsitelib)
%perl_vendorarch %(eval "`%{__perl} -V:installvendorarch`"; echo $installvendorarch)
%perl_vendorlib %(eval "`%{__perl} -V:installvendorlib`"; echo $installvendorlib)
%perl_archlib %(eval "`%{__perl} -V:installarchlib`"; echo $installarchlib)
%perl_privlib %(eval "`%{__perl} -V:installprivlib`"; echo $installprivlib)
#------------------------------------------------------------------------------
# Useful python macros for determining python version and paths
#
%python_sitelib %(%{__python} -c "from distutils.sysconfig import get_python_lib; import sys; sys.stdout.write(get_python_lib())")
%python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; import sys; sys.stdout.write(get_python_lib(1))")
%python_version %(%{__python} -c "import sys; sys.stdout.write(sys.version[:3])")
#------------------------------------------------------------------------------
# arch macro for all Intel i?86 compatibile processors
# (Note: This macro (and it's analogues) will probably be obsoleted when
# rpm can use regular expressions against target platforms in macro
# conditionals.
#
%ix86 i386 i486 i586 i686 pentium3 pentium4 athlon geode
#------------------------------------------------------------------------------
# arch macro for all supported ARM processors
%arm armv3l armv4b armv4l armv4tl armv5tel armv5tejl armv6l armv7l
#------------------------------------------------------------------------------
# arch macro for all supported Sparc processors
%sparc sparc sparcv8 sparcv9 sparcv9v sparc64 sparc64v
#------------------------------------------------------------------------------
# arch macro for all supported Alpha processors
%alpha alpha alphaev56 alphaev6 alphaev67
#------------------------------------------------------------------------------
# arch macro for all supported PowerPC 64 processors
%power64 ppc64 ppc64p7 ppc64le
#------------------------------------------------------------------------
# Use in %install to generate locale specific file lists. For example,
#
# %install
# ...
# %find_lang %{name}
# ...
# %files -f %{name}.lang
#
%find_lang %{_rpmconfigdir}/find-lang.sh %{buildroot}
# Commands + opts to use for retrieving remote files
# Proxy opts can be set through --httpproxy/--httpport popt aliases,
# for any special local needs use %__urlhelper_localopts in system-wide
# or per-user macro configuration.
%__urlhelpercmd /usr/bin/curl
%__urlhelperopts --silent --show-error --fail --globoff --location -o
%__urlhelper_proxyopts %{?_httpproxy:--proxy %{_httpproxy}%{?_httpport::%{_httpport}}}%{!?_httpproxy:%{nil}}
%_urlhelper %{__urlhelpercmd} %{?__urlhelper_localopts} %{?__urlhelper_proxyopts} %{__urlhelperopts}
#------------------------------------------------------------------------------
# Macros for further automated spec %setup and patch application
# default to plain patch
%__scm patch
# meh, figure something saner
%__scm_username rpm-build
%__scm_usermail <rpm-build>
%__scm_author %{__scm_username} %{__scm_usermail}
# Plain patch (-m is unused)
%__scm_setup_patch(q) %{nil}
%__scm_apply_patch(qp:m:)\
%{__patch} %{-p:-p%{-p*}} %{-q:-s}
# Mercurial (aka hg)
%__scm_setup_hg(q)\
%{__hg} init %{-q} .\
%{__hg} add %{-q} .\
%{__hg} commit %{-q} --user "%{__scm_author}" -m "%{name}-%{version} base"
%__scm_apply_hg(qp:m:)\
%{__hg} import - %{-p:-p%{-p*}} %{-q} -m %{-m*} --user "%{__scm_author}"
# Git
%__scm_setup_git(q)\
%{__git} init %{-q}\
%{__git} config user.name "%{__scm_username}"\
%{__git} config user.email "%{__scm_usermail}"\
%{__git} add .\
%{__git} commit %{-q} -a\\\
--author "%{__scm_author}" -m "%{name}-%{version} base"
%__scm_apply_git(qp:m:)\
%{__git} apply --index %{-p:-p%{-p*}} -\
%{__git} commit %{-q} -m %{-m*} --author "%{__scm_author}"
# Git, using "git am" (-m is unused)
%__scm_setup_git_am(q)\
%{expand:%__scm_setup_git %{-q}}
%__scm_apply_git_am(qp:m:)\
%{__git} am %{-q} %{-p:-p%{-p*}}
# Quilt
%__scm_setup_quilt(q) %{nil}
%__scm_apply_quilt(qp:m:)\
%{__quilt} import %{-p:-p%{-p*}} %{1} && %{__quilt} push
# Bzr
%__scm_setup_bzr(q)\
%{__bzr} init %{-q}\
%{__bzr} whoami --branch "%{__scm_author}"\
%{__bzr} add .\
%{__bzr} commit %{-q} -m "%{name}-%{version} base"
# bzr doesn't seem to have its own command to apply patches?
%__scm_apply_bzr(qp:m:)\
%{__patch} %{-p:-p%{-p*}} %{-q:-s}\
%{__bzr} commit %{-q} -m %{-m*}
# Single patch application
%apply_patch(qp:m:)\
%{lua:\
local file = rpm.expand("%{1}")\
if posix.access(file, "r") then\
local options = rpm.expand("%{-q} %{-p:-p%{-p*}} %{-m:-m%{-m*}}")\
local scm_apply = rpm.expand("%__scm_apply_%{__scm}")\
print(rpm.expand("%{uncompress:"..file.."} | "..scm_apply.." "..options.."\\n"))\
else\
print("echo 'Cannot read "..file.."'; exit 1;".."\\n")\
end}
# Automatically apply all patches
%autopatch(vp:)\
%{lua:\
local options = rpm.expand("%{!-v:-q} %{-p:-p%{-p*}} ")\
for i, p in ipairs(patches) do\
print(rpm.expand("%apply_patch -m %{basename:"..p.."} "..options..p.."\\n"))\
end}
# One macro to (optionally) do it all.
# -S<scm name> Sets the used patch application style, eg '-S git' enables
# usage of git repository and per-patch commits.
# -N Disable automatic patch application
# -p<num> Use -p<num> for patch application
%autosetup(a:b:cDn:TvNS:p:)\
%setup %{-a} %{-b} %{-c} %{-D} %{-n} %{-T} %{!-v:-q}\
%{-S:%global __scm %{-S*}}\
%{-S:%{expand:%__scm_setup_%{-S*} %{!-v:-q}}}\
%{!-N:%autopatch %{-v} %{-p:-p%{-p*}}}
# \endverbatim
#*/
Copyright 2K16 - 2K18 Indonesian Hacker Rulez
;?>)