| Current Path : /proc/2/root/usr/share/doc/sudo-1.8.6p3/ |
| Current File : //proc/2/root/usr/share/doc/sudo-1.8.6p3/UPGRADE |
Notes on upgrading from an older release
========================================
o Upgrading from a version prior to 1.8.2:
When matching Unix groups in the sudoers file, sudo will now
match based on the name of the group as it appears in sudoers
instead of the group ID. This can substantially reduce the
number of group lookups for sudoers files that contain a large
nummber of groups. There are a few side effects of this change.
1) Unix groups with different names but the same group ID are
can no longer be used interchangably. Sudo will look up all
of a user's groups by group ID and use the resulting group
names when matching sudoers entries. If there are multiple
groups with the same ID, the group name returned by the
system getgrgid() library function is the name that will be
used when matching sudoers entries.
2) Unix group names specified in the sudoers file that are
longer than the system maximum will no longer match. For
instance, if there is a Unix group "fireflie" on a system
where group names are limited to eight characters, "%fireflies"
in sudoers will no longer match "fireflie". Previously, a
lookup by name of the group "fireflies" would have matched
the "fireflie" group on most systems.
o Upgrading from a version prior to 1.8.1:
Changes in the sudoers parser could result in parse errors for
existing sudoers file. These changes cause certain erroneous
entries to be flagged as errors where before they allowed.
Changes include:
Combining multiple Defaults entries with a backslash. E.g.
Defaults set_path \
Defaults syslog
which should be:
Defaults set_path
Defaults syslog
Also, double-quoted strings with a missing end-quote are now
detected and result in an error. Previously, text starting a
double quote and ending with a newline was ignored. E.g.
Defaults set_path"foo
In previous versions of sudo, the `"foo' portion would have
been ignored.
To avoid problems, sudo 1.8.1's "make install" will not install
a new sudo binary if the existing sudoers file has errors.
In Sudo 1.8.1 the "noexec" functionality has moved out of the
sudoers policy plugin and into the sudo front-end. As a result,
the path to the noexec file is now specified in the sudo.conf
file instead of the sudoers file. If you have a sudoers file
that uses the "noexec_file" option, you will need to move the
definition to the sudo.conf file instead.
Old style in /etc/sudoers:
Defaults noexec_file=/usr/local/libexec/sudo_noexec.so
New style in /etc/sudo.conf:
Path noexec /usr/local/libexec/sudo_noexec.so
o Upgrading from a version prior to 1.8.0:
Starting with version 1.8.0, sudo uses a modular framework to
support policy and I/O logging plugins. The default policy
plugin is "sudoers" which provides the traditional sudoers
evaluation and I/O logging. Plugins are typically located in
/usr/libexec or /usr/local/libexec, though this is system-dependent.
The sudoers plugin is named "sudoers.so" on most systems.
The sudo.conf file, usually stored in /etc, is used to configure
plugins. This file is optional--if no plugins are specified
in sudo.conf, the "sudoers" plugin is used. See the sample.sudo.conf
file in the doc directory or refer to the updated sudo manual
to see how to configure sudo.conf.
The "askpass" setting has moved from the sudoers file to the
sudo.conf file. If you have a sudoers file that uses the
"askpass" option, you will need to move the definition to the
sudo.conf file.
Old style in /etc/sudoers:
Defaults askpass=/usr/X11R6/bin/ssh-askpass
New style in /etc/sudo.conf:
Path askpass /usr/X11R6/bin/ssh-askpass
o Upgrading from a version prior to 1.7.5:
Sudo 1.7.5 includes an updated LDAP schema with support for
the sudoNotBefore, sudoNotAfter and sudoOrder attributes.
The sudoNotBefore and sudoNotAfter attribute support is only
used when the SUDOERS_TIMED setting is enabled in ldap.conf.
If enabled, those attributes are used directly when constructing
an LDAP filter. As a result, your LDAP server must have the
updated schema if you want to use sudoNotBefore and sudoNotAfter.
The sudoOrder support does not affect the LDAP filter sudo
constructs and so there is no need to explicitly enable it in
ldap.conf. If the sudoOrder attribute is not present in an
entry, a value of 0 is used. If no entries contain sudoOrder
attributes, the results are in whatever order the LDAP server
returns them, as in past versions of sudo.
Older versions of sudo will simply ignore the new attributes
if they are present in an entry. There are no compatibility
problems using the updated schema with older versions of sudo.
o Upgrading from a version prior to 1.7.4:
Starting with sudo 1.7.4, the time stamp files have moved from
/var/run/sudo to either /var/db/sudo, /var/lib/sudo or /var/adm/sudo.
The directories are checked for existence in that order. This
prevents users from receiving the sudo lecture every time the
system reboots. Time stamp files older than the boot time are
ignored on systems where it is possible to determine this.
Additionally, the tty_tickets sudoers option is now enabled by
default. To restore the old behavior (single time stamp per user),
add a line like:
Defaults !tty_tickets
to sudoers or use the --without-tty-tickets configure option.
The HOME and MAIL environment variables are now reset based on the
target user's password database entry when the env_reset sudoers option
is enabled (which is the case in the default configuration). Users
wishing to preserve the original values should use a sudoers entry like:
Defaults env_keep += HOME
to preserve the old value of HOME and
Defaults env_keep += MAIL
to preserve the old value of MAIL.
NOTE: preserving HOME has security implications since many programs
use it when searching for configuration files. Adding HOME to env_keep
may enable a user to run unrestricted commands via sudo.
The default syslog facility has changed from "local2" to "authpriv"
(or "auth" if the operating system doesn't have "authpriv").
The --with-logfac configure option can be used to change this
or it can be changed in the sudoers file.
o Upgrading from a version prior to 1.7.0:
Starting with sudo 1.7.0, comments in the sudoers file must not
have a digit or minus sign immediately after the comment character
('#'). Otherwise, the comment may be interpreted as a user or
group ID.
When sudo is build with LDAP support the /etc/nsswitch.conf file is
now used to determine the sudoers seach order. sudo will default to
only using /etc/sudoers unless /etc/nsswitch.conf says otherwise.
This can be changed with an nsswitch.conf line, e.g.:
sudoers: ldap files
Would case LDAP to be searched first, then the sudoers file.
To restore the pre-1.7.0 behavior, run configure with the
--with-nsswitch=no flag.
Sudo now ignores user .ldaprc files as well as system LDAP defaults.
All LDAP configuration is now in /etc/ldap.conf (or whichever file
was specified by configure's --with-ldap-conf-file option).
If you are using TLS, you may now need to specify:
tls_checkpeer no
in sudo's ldap.conf unless ldap.conf references a valid certificate
authority file(s).
Please also see the NEWS file for a list of new features in
sudo 1.7.0.
o Upgrading from a version prior to 1.6.9:
Starting with sudo 1.6.9, if an OS supports a modular authentication
method such as PAM, it will be used by default by configure.
Environment variable handling has changed significantly in sudo
1.6.9. Prior to version 1.6.9, sudo would preserve the user's
environment, pruning out potentially dangerous variables.
Beginning with sudo 1.6.9, the envionment is reset to a default
set of values with only a small number of "safe" variables
preserved. To preserve specific environment variables, add
them to the "env_keep" list in sudoers. E.g.
Defaults env_keep += "EDITOR"
The old behavior can be restored by negating the "env_reset"
option in sudoers. E.g.
Defaults !env_reset
There have also been changes to how the "env_keep" and
"env_check" options behave.
Prior to sudo 1.6.9, the TERM and PATH environment variables
would always be preserved even if the env_keep option was
redefined. That is no longer the case. Consequently, if
env_keep is set with "=" and not simply appended to (i.e. using
"+="), PATH and TERM must be explicitly included in the list
of environment variables to keep. The LOGNAME, SHELL, USER,
and USERNAME environment variables are still always set.
Additionally, the env_check setting previously had no effect
when env_reset was set (which is now on by default). Starting
with sudo 1.6.9, environment variables listed in env_check are
also preserved in the env_reset case, provided that they do not
contain a '/' or '%' character. Note that it is not necessary
to also list a variable in env_keep--having it in env_check is
sufficent.
The default lists of variables to be preserved and/or checked
are displayed when sudo is run by root with the -V flag.
o Upgrading from a version prior to 1.6.8:
Prior to sudo 1.6.8, if /var/run did not exist, sudo would put
the time stamp files in /tmp/.odus. As of sudo 1.6.8, the
time stamp files will be placed in /var/adm/sudo or /usr/adm/sudo
if there is no /var/run directory. This directory will be
created if it does not already exist.
Previously, a sudoers entry that explicitly prohibited running
a command as a certain user did not override a previous entry
allowing the same command. This has been fixed in sudo 1.6.8
such that the last match is now used (as it is documented).
Hopefully no one was depending on the previous (buggy) beghavior.
o Upgrading from a version prior to 1.6:
As of sudo 1.6, parsing of runas entries and the NOPASSWD tag
has changed. Prior to 1.6, a runas specifier applied only to
a single command directly following it. Likewise, the NOPASSWD
tag only allowed the command directly following it to be run
without a password. Starting with sudo 1.6, both the runas
specifier and the NOPASSWD tag are "sticky" for an entire
command list. So, given the following line in sudo < 1.6
millert ALL=(daemon) NOPASSWD:/usr/bin/whoami,/bin/ls
millert would be able to run /usr/bin/whoami as user daemon
without a password and /bin/ls as root with a password.
As of sudo 1.6, the same line now means that millert is able
to run run both /usr/bin/whoami and /bin/ls as user daemon
without a password. To expand on this, take the following
example:
millert ALL=(daemon) NOPASSWD:/usr/bin/whoami, (root) /bin/ls, \
/sbin/dump
millert can run /usr/bin/whoami as daemon and /bin/ls and
/sbin/dump as root. No password need be given for either
command. In other words, the "(root)" sets the default runas
user to root for the rest of the list. If we wanted to require
a password for /bin/ls and /sbin/dump the line could be written
thusly:
millert ALL=(daemon) NOPASSWD:/usr/bin/whoami, \
(root) PASSWD:/bin/ls, /sbin/dump
Additionally, sudo now uses a per-user time stamp directory
instead of a time stamp file. This allows tty time stamps to
simply be files within the user's time stamp dir. For the
default, non-tty case, the time stamp on the directory itself
is used.
Also, the temporary file used by visudo is now /etc/sudoers.tmp
since some versions of vipw on systems with shadow passwords use
/etc/stmp for the temporary shadow file.
o Upgrading from a version prior to 1.5:
By default, sudo expects the sudoers file to be mode 0440 and
to be owned by user and group 0. This differs from version 1.4
and below which expected the sudoers file to be mode 0400 and
to be owned by root. Doing a `make install' will set the sudoers
file to the new mode and group. If sudo encounters a sudoers
file with the old permissions it will attempt to update it to
the new scheme. You cannot, however, use a sudoers file with
the new permissions with an old sudo binary. It is suggested
that if have a means of distributing sudo you distribute the
new binaries first, then the new sudoers file (or you can leave
sudoers as is and sudo will fix the permissions itself as long
as sudoers is on a local file system).
Copyright 2K16 - 2K18 Indonesian Hacker Rulez
;?>)