| Current Path : /proc/3/root/usr/share/doc/cpanel-php73-webmail-5.2.22/ |
| Current File : //proc/3/root/usr/share/doc/cpanel-php73-webmail-5.2.22/INSTALL |
==============================================
Installing Horde Groupware Webmail Edition 5
==============================================
:Contact: horde@lists.horde.org
.. contents:: Contents
.. section-numbering::
This document contains instructions for installing Horde Groupware Webmail
Edition on your system.
For information on the capabilities and features of Horde Groupware Webmail
Edition, see the file README_ in the top-level directory of the Horde Groupware
Webmail Edition distribution.
Quick Install
=============
These are very terse instructions how to install Horde Groupware Webmail
Edition and its prerequisites on a LAMP sytem. They are addressed to
experienced administrators who know exactly what they are doing. For more
detailed instructions, start reading below at Prerequisites_.
1. Compiling PHP for Apache 2::
cd php-x.x.x/
./configure --with-apxs2=/usr/sbin/apxs2 \
--with-gettext --enable-mbstring=all --enable-mbregex \
--with-gd --with-png-dir=/usr --with-jpeg-dir=/usr \
[--with-mysql|--with-pgsql|--with-oci8]
[--with-tidy]
[--with-ftp]
make
make install
2. Restart Apache.
3. Register Horde PEAR channel::
pear channel-discover pear.horde.org
4. Set Horde installation directory::
pear install horde/horde_role
pear run-scripts horde/horde_role
5. Install Horde Groupware Webmail Edition::
pear install -a -B horde/webmail
6. Run installation script::
webmail-install
7. Test Horde Groupware Webmail Edition::
http://your-server/horde/test.php
Prerequisites
=============
The following prerequisites are **REQUIRED** for Horde Groupware Webmail
Edition to function properly.
1. A webserver that supports PHP.
Horde Groupware Webmail Edition is primarily developed under the Apache and
Lighttpd webservers, which we recommend. These servers are available from:
http://httpd.apache.org/
http://www.lighttpd.net/
2. A web server with PATH_INFO support.
The dynamic interfaces of Horde Groupware Webmail Edition requires a web
server that correctly sets the PATH_INFO environment variable for all PHP
scripts. Every modern web server supports this, but you might have to enable
this feature in the web server configuration. e.g. Apache servers require::
AcceptPathInfo On
Lighttpd servers require::
"broken-scriptfilename" => "enable"
3. PHP 5.3.0 or above.
PHP is the interpreted language in which Horde Groupware Webmail Edition is
written.
.. Note:: If possible, you should install PHP with your operating system's
package manager. Alternatively you build PHP yourself.
To build PHP from sources, you can obtain it at
http://www.php.net/
Follow the instructions in the PHP package to build PHP for your system. If
you use Apache, be sure to build PHP as a library with one of the following
options::
--with-apache
--with-apxs
--with-apxs2
options to ``./configure``, and not as a standalone executable.
The following PHP options are **REQUIRED** by Horde Groupware Webmail
Edition (listed with their own prerequisites and configure options). In
many cases, the required libraries and tools can be obtained as packages
from your operating system vendor.
a. Gettext support. ``--with-gettext``
Gettext is the GNU Translation Project's localization library. Horde
Groupware Webmail Edition uses gettext to provide local translations of
text displayed by applications. Information on obtaining the gettext
package is available at
http://www.gnu.org/software/gettext/gettext.html
See also note below on configuring Translations_.
b. XML and DOMXML support.
XML and DOM support are enabled in PHP 5 by default. You only have to
make sure that you do **not** use ``--disable-dom``,
``--disable-simplexml``, or ``--disable-xml``.
Make sure you are using a newer version of libxml. Older version of
libxml (e.g. 2.6.26) have been reported to be partially broken when
handling certain charsets.
The following PHP options are **RECOMMENDED** to enable advanced features
in Horde Groupware Webmail Edition:
a. File Upload Support
File upload support is **required** to allow attachments in mail
composition and to allow various importing features to work (e.g.
importing PGP or S/MIME keys, importing mbox files). To enable file
upload support:
1. In your php.ini file, the following line **must** be present::
file_uploads = On
2. Your temporary upload directory **must** be writable to the user
the web server is running as. If you leave the configuration
option ``upload_tmp_dir`` blank in ``php.ini``, PHP will use the
default directory compiled into it (normally ``/tmp`` on
Unix-like systems).
3. Set the maximum size of the uploaded files via the
``upload_max_filesize`` configuration option in ``php.ini``. For
example, to allow 5 MB attachments, place the following line in
your ``php.ini`` file::
upload_max_filesize = 5M
If either ``file_uploads`` is turned off, or your temporary upload
directory is *not* writable by the server, all file upload
functionality will be disabled by Horde Groupware Webmail Edition and
will not be available to the user.
See the `File Uploads`_ FAQ entry for further information.
b. A preferences container.
Horde Groupware Webmail Edition can store user preferences in an SQL
database, an LDAP directory, an IMSP server, a Kolab server, or in PHP
sessions. An SQL database is used and configured by default.
For SQL database preferences storage, Horde Groupware Webmail Edition is
thoroughly tested on MySQL(i) (``--with-mysql(i)``) and PostgreSQL
(``--with-pgsql``), and has been reported to work with SQLite (enabled by
default).
Preferences can also be stored via LDAP (``--with-ldap``), Kolab
(``--with-ldap``), and IMSP.
Alternatively, preferences can be stored in PHP sessions, which
requires no external programs or configure options, but which will not
maintain preferences between sessions.
While the LDAP, database, Kolab, or IMSP server need not be running on
the machine onto which you are installing Horde Groupware Webmail
Edition, the appropriate client libraries to access the server must be
available locally.
If a preference container is not configured, no preference options will
be configurable via Horde Groupware Webmail Edition's web interface -
the default values stored in each applications ``config/prefs.php`` file
will be used.
c. UTF-8 support (mbstring and iconv extensions) ``--enable-mbstring``
If these extensions are enabled, Horde Groupware Webmail Edition can
better support multibyte character sets like UTF-8.
For iconv support you should use the GNU libiconv library, which is more
stable and supports more charsets, compared to other iconv
implementations, like Solaris', for example.
Iconv support is enabled by default in PHP 5. You only have to make sure
that you do **not** use ``--without-iconv``
d. GD support ``--with-gd``
Horde Groupware Webmail Edition will use the GD extension to perform
manipulations on image data through the Horde_Image library.
If you want GD to be able to work with PNG images, you should use the
``--with-png-dir`` option to make sure PHP can find the PNG libraries
it needs to compile.
If you want GD to be able to work with JPEG images, you should use the
``--with-jpeg-dir`` option to make sure PHP can find the JPEG libraries
it needs to compile.
You can also use the imagick_ extension or the ImageMagick_ package to do
these manipulations instead. The imagick_ extension is the recommended
method for image manipulation. See the ``Image Manipulation`` tab of the
Horde configuration for more details.
.. _imagick: http://pecl.php.net/package/imagick
.. _ImageMagick: http://www.imagemagick.org
e. tidy ``--with-tidy``
The tidy PHP extension is required to sanitize HTML data.
.. _`OpenSSL Support`:
f. OpenSSL support ``--with-openssl``
The OpenSSL PHP extension is used by Horde Groupware Webmail Edition to
provide S/MIME support. Without the extension, all S/MIME options will
be disabled.
Additionally, the OpenSSL PHP extension is REQUIRED if using TLS or SSL
to connect to the IMAP/POP3 server.
See http://www.php.net/openssl for information on compiling OpenSSL
into PHP.
g. fileinfo
Allows Horde modules to guess the MIME type of files by analyzing
their contents.
This module is automatically enabled by default.
h. intl ``--enable-intl``
The intl module is required to handle display of Internationalized
Domain Names (see RFC 3490), e.g in e-mail addresses.
i. _`curl` ``--with-curl``
The `curl extension`_, if installed, will be used instead of PHP's
fopen() when retrieving data from external HTTP servers (remote
calendars, web APIs, etc.). This is much more reliable and flexible, so
it is recommended to either enable it or install the http_ extension.
This extension can be enabled by adding the ``--with-curl`` option when
compiling PHP.
j. FTP support ``--with-ftp``
If using the FTP VFS driver for the file manager, the FTP PHP module is
**required**.
4. PEAR Modules
PEAR is short for "PHP Extension and Application Repository". The goal of
PEAR is to provide a means of distributing reusable code.
For more information, see http://pear.php.net/
.. Important:: Make sure you are running a supported (i.e. new enough)
version of PEAR: use the test script described below under
"`Testing Horde Groupware Webmail Edition`_". Do **not** use
the PEAR version from ftp.horde.org.
Check that the path where the PEAR packages are installed are part of the
``include_path`` parameter that PHP uses to find PEAR packages.
Run the command::
pear config-show
You will see something like::
PEAR directory php_dir /usr/share/php
Now open the php.ini file of your system, for example ``/etc/php.ini``,
find the ``include_path`` and make sure that ``/usr/share/php`` is part of
the list. If you had to change that value, restart the web server after
saving ``php.ini``.
.. Important:: If you are going to install Horde the recommended way,
i.e. using the PEAR installer, you can skip the remainder of
this section. Installing Horde through PEAR will
automatically download and install all required PEAR
packages.
These PEAR packages are **REQUIRED** to be installed:
a. Date
Horde Groupware Webmail Edition uses the Date package for various date
calculations.
To install, enter the following at the command prompt::
pear install Date
These PEAR packages are **RECOMMENDED** to be installed:
a. Net_DNS2
If installed, it will be used instead of the built-in PHP function
gethostbyaddr() for host name lookups. This has the advantage that
Net_DNS2 has configurable timeouts and retries.
To install, enter the following at the command prompt::
pear install Net_DNS2
b. Services_Weather (>= 1.3.1)
**REQUIRED** only if you wish to use the weather.com block on the portal
page.
To install, enter the following at the command prompt::
pear install Services_Weather
Additional steps are required if you want use the METAR weather block on
the portal page. See the file ``data/Services_Weather/buildMetarDB.php``
in your PEAR directory for details.
c. File_Fstab
Required only if you use the localhost driver for the Accounts block.
To install, enter the following at the command prompt::
pear install File_Fstab
These PEAR packages are **OPTIONAL** to be installed:
a. Date_Holidays
Horde Groupware Webmail Edition can use the Date_Holidays package to show
several sets of national and religious holidays and memorial days. Since
Date_Holidays consists of a number of sub-packages, one for each country,
you should install all packages at once::
pear install Date_Holidays-alpha#all
b. Net_Sieve
Horde Groupware Webmail Edition uses the Net_Sieve class for
communicating with timsieved running on Cyrus mail servers. You will
only need to install this class if you are using Sieve for filtering.
To install, enter the following at the command prompt::
pear install Net_Sieve
This method of installing PEAR packages requires that you have a PHP version
that has been compiled as a static binary. All versions of PHP build both
both a SAPI module (Apache, CGI, etc.) and a command-line (CLI) binary.
Check if you have a php binary in ``/usr/local/bin`` (``/usr/bin`` if you
installed from an operating system package) before recompiling.
For more detailed directions on installing PEAR packages, see the PEAR
documentation at http://pear.php.net/manual/
5. Additional PECL Modules
PECL is short for "PHP Extension Community Library". The goal of PECL is
to provide a means of easily distributing PHP extensions.
For more information, see http://pecl.php.net/
When you install a PECL extension, you have to add it to your ``php.ini``
so it gets loaded. Add the following line to your ``php.ini`` file to load
the extension (the extension should be installed in the directory specified
by the ``extension_dir`` option in ``php.ini``)::
extension=fileinfo.so
Or on Windows::
extension=fileinfo.dll
After that, restart your webserver.
These PECL modules are **RECOMMENDED** to be installed if you need
advanced functionality:
a. imagick
The imagick module can be used by Horde's image library to provide all
kind of image manipulations.
To install, enter the following at the command prompt::
pecl install imagick
b. horde_lz4
If the horde_lz4 extension is available, Horde can perform real-time
compression on data, resulting in reduced storage load on the server for
things like cache storage and session data. It is highly recommended.
To install, enter the following at the command prompt::
pecl install horde/horde_lz4
c. memcache
If using the memcached SessionHandler, the memcache PECL extension must
be installed.
To install, enter the following at the command prompt::
pecl install memcache
d. _`http`
The `http extension`_, if installed, will be used instead of PHP's
fopen() when retrieving data from external HTTP servers (remote
calendars, web APIs, etc.). This is much more reliable and flexible, so
it recommended to either install this or enable the curl_ extension.
To install, enter the following at the command prompt::
pecl install http
For additional help on using the pear command-line program to install PECL
extensions, see the PEAR installation section above.
6. At least one IMAP or POP3 server.
While Horde Groupware Webmail Edition is an application that is installed
on a Web server and is run from a Web browser, it is only an IMAP and POP3
*client*, like Outlook, Apple Mail or Thunderbird. You must have access to
an IMAP or POP3 server(s) on which your users' mail is stored in order to
use Horde Groupware Webmail Edition.
IMAP is **strongly** recommended over POP3. See, e.g.,
http://staff.washington.edu/gray/papers/imap.vs.pop.brief.html
Freely available IMAP servers (for \*nix systems) that have been verified
to work best with Horde Groupware Webmail Edition include:
- Archiveopteryx (http://www.archiveopteryx.org/)
- Courier-IMAP (http://www.inter7.com/courierimap.html)
- Cyrus (http://www.cyrusimap.org/)
- Dovecot (http://www.dovecot.org/)
- UW-IMAP (ftp://ftp.cac.washington.edu/imap/)
Most of these packages also include POP3 support as well.
The Horde Project recommends either Cyrus or Dovecot (see
`docs/PERFORMANCE`_ for further information).
The IMAP server MUST support IMAP4rev1 (RFC 3501).
The POP server MUST support POP3 (RFC 1939/STD 53).
.. Note:: If using a POP server, it MUST support the UIDL capability.
POP3 support is limited to performing only basic mail actions;
Caching, on-demand filtering, searching, and sorting will be
disabled.
7. Sendmail or SMTP server.
Horde Groupware Webmail Edition sends mail via either a local sendmail or a
remote SMTP server. It is **RECOMMENDED** that SMTP be used.
The following non-PHP prerequisites are **RECOMMENDED**:
1. aspell - Spelling Checker
Aspell, a comand-line program, is used as Horde Groupware Webmail Edition's
spell-checking engine. You must install and configure aspell to use Horde
Groupware Webmail Edition's spell-check feature.
Version 0.60 or higher is REQUIRED.
You can obtain aspell from:
http://aspell.sourceforge.net/
2. FTP server.
If using a FTP backend for the file manager, you **must** have at least one
FTP server.
3. ElasticSearch server.
An ElasticSearch_ server or cluster running on localhost can be used to
provide indexing of bookmarks data and quick searching of the indexed
content.
.. _ElasticSearch: http://www.elasticsearch.org/
Installing Horde Groupware Webmail Edition
==========================================
The **RECOMMENDED** way to install Horde Groupware Webmail Edition is using the
PEAR installer.
Installing with PEAR
~~~~~~~~~~~~~~~~~~~~
First you need to register the Horde PEAR channel server to your local PEAR
system. This has to be done only **once** ever on a single PEAR system::
pear channel-discover pear.horde.org
Next install a so-called "role" for Horde. This role defines where Horde
Groupware Webmail Edition is supposed to be installed. This should be a
directory in your web server's web root, e.g. ``/var/www/webmail``. Again this
has to be done only **once** ever on a single PEAR system::
pear install horde/horde_role
pear run-scripts horde/horde_role
When installing Horde Groupware Webmail Edition through PEAR now, the installer
will automatically install any dependencies of Horde Groupware Webmail Edition
too. If you want to install Horde Groupware Webmail Edition with all optional
dependencies, but without the binary PECL packages that have to be compiled,
specify both the ``-a`` and the ``-B`` flag::
pear install -a -B horde/webmail
By default, only the required dependencies will be installed::
pear install horde/webmail
If you want to install Horde Groupware Webmail Edition even with all binary
dependencies, you need to remove the ``-B`` flag. Please note that this might
also try to install PHP extensions through PECL that might need further
configuration or activation in your PHP configuration::
pear install -a horde/webmail
Installing into separate PEAR
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. Warning:: Unless you really know **why** you want to do this, you probably
do **not** want to do this. Use the general PEAR installation
instructions from above instead.
If you want to create a separate PEAR installation for installing Horde
Groupware Webmail Edition, independent from the system-wide PEAR installation,
this can be done with the following commands (in this example,
``/var/www/webmail`` is used as the location of the web-accessible Horde
directory)::
mkdir /var/www/webmail
pear config-create /var/www/webmail /var/www/webmail/pear.conf
pear -c /var/www/webmail/pear.conf install pear
Then follow the regular installation steps, but use the ``pear`` command from
the PEAR installation you just created, e.g.::
/var/www/webmail/pear/pear -c /var/www/webmail/pear.conf \
channel-discover pear.horde.org
Finally configure your web server in some way to point PHP's ``include_path``
setting to the PEAR installation and the ``PHP_PEAR_SYSCONF_DIR`` environment
variable to the directory used during the config-create command::
php_value include_path /var/www/webmail/pear/php
SetEnv PHP_PEAR_SYSCONF_DIR /var/www/webmail
It is recommended to not use the .htaccess file in ``/var/www/webmail/`` to set
these values because it will be overwritten with every further update.
Finishing installation
~~~~~~~~~~~~~~~~~~~~~~
To finish installation, run the installation script on the command line and
answer all questions::
webmail-install
If you installed Horde Groupware Webmail Edition into the global PEAR system,
this script should be in your command path. If the script cannot be found in
your path, you need to specify the full path to the script, e.g.::
/var/www/webmail/pear/webmail-install
You can use the ``pear`` command to find the place where the script has been
installed::
pear config-get bin_dir
If you installed into a local PEAR installation, you need to tell PHP and PEAR
where to find the installation and the script, e.g.::
PHP_PEAR_SYSCONF_DIR=/var/www/webmail php \
-d include_path=/var/www/webmail/pear/php \
/var/www/webmail/pear/webmail-install
Configuring Horde Groupware Webmail Edition
===========================================
1. Configuring the web server
Horde Groupware Webmail Edition requires the following webserver
settings. Examples shown are for Apache; other webservers' configurations
will differ.
a. PHP interpretation for files matching ``*.php``::
AddType application/x-httpd-php .php
.. Note:: The above instructions may not work if you have specified PHP
as an output filter with ``SetOutputFilter`` directive in
Apache 2.x versions. In particular, Red Hat 8.0 and above
Apache 2.x RPMS have the output filter set, and **MUST NOT**
have the above ``AddType`` directive added.
b. ``index.php`` as an index file (brought up when a user requests a URL for
a directory)::
DirectoryIndex index.php
c. If you plan to provide ActiveSync support to your users, you have to
create an alias of the ``/Microsoft-Servers-ActiveSync`` URL to
``/webmail/rpc.php``. See http://wiki.horde.org/ActiveSync for details.
2. Configuring Horde Groupware Webmail Edition
Documentation on the format and purpose of the configuration files in the
``config/`` directory can be found in each file. The defaults will be
correct for most sites. If you wish to customize Horde Groupware Webmail
Edition's appearance and behavior, create "local" files for the
configuration file you want to change. For example if you want to change the
default value and lock a preference, create a ``config/prefs.local.php``
file with the following content::
<?php
$_prefs['prefname']['value'] = 'somedefault';
$_prefs['prefname']['locked'] = true;
This works with any configuration file.
.. Warning:: All configuration files in Horde Groupware Webmail Edition are
PHP scripts that are executed by the web server. If you make an
error in one of these files, Horde might stop working. Thus it
is always a good idea to test the configuration files after you
edited them. If you want to test mime_drivers.local.php for
example run::
php -l mime_drivers.local.php
* By default, Horde Groupware Webmail Edition is configured to NOT display
text/html message parts inline. This is done for various security
reasons. If you would like to see text/html parts inline, you must create
a ``imp/config/mime_drivers.local.php`` file (or add to the existing
mime_drivers.local.php file) with the following content::
<?php
$mime_drivers['html']['inline'] = true;
* The default configuration stores files uploaded through the file manager
in the SQL database. This is the most compatible configuration but doesn't
scale well, may hit some database server limits, and may only work for
very small installations. You should configure a different backend as soon
as possible. See ``gollem/config/backends.php`` and
``gollem/config/backends.d/10-webmail.php`` for details.
3. Setting up alarm emails
If you want your users to be able to receive emails from the Horde_Alarm
system, you must set up a cron entry for ``horde-alarms``, you
must have at least one administrator specified in the Horde configuration,
and you must have the PHP CLI installed (a CGI binary is not supported -
``php -v`` will report what kind of PHP binary you have).
Running the job every 5 minutes is recommended::
# Horde Alarms
*/5 * * * * /usr/bin/horde-alarms
If not installing Horde Groupware Webmail Edition through PEAR or if PEAR's
``bin_dir`` configuration doesn't point to ``/usr/bin/``, replace
``/usr/bin/horde-alarms`` with the path to the ``horde-alarms`` script in
your Horde installation.
4. Testing Horde Groupware Webmail Edition
Once you have configured your webserver, PHP, and Horde Groupware Webmail
Edition, bring up the included test page in your web browser to ensure that
all necessary prerequisites have been met. If you installed Horde Groupware
Webmail Edition as described above, the URL to the test page would be::
http://your-server/webmail/test.php
Check that your PHP version is acceptably recent, that all required module
capabilities are present, and that ``magic_quotes_runtime`` is set to
``Off``. Then note the ``Session counter: 1`` line under ``PHP Sessions``,
and reload the page. The session counter should increment.
If you get a warning like ``Failed opening '/path/to/test.php' for
inclusion``, make sure that the web server has the permission to read the
``test.php`` file.
5. Securing Horde Groupware Webmail Edition
a. Global Passwords
Some of Horde Groupware Webmail Edition's configuration files contain
passwords which local users could use to access your database. It is
recommended to ensure that at least the Horde Groupware Webmail Edition
configuration files (in ``config/``) are not readable to system users.
There are ``.htaccess`` files restricting access to directories that do
not need to be accessed directly; before relying on those, ensure that
your webserver supports ``.htaccess`` and is configured to use them, and
that the files in those directories are in fact inaccessible via the
browser.
An additional approach is to make Horde Groupware Webmail Edition's
configuration files owned by the user ``root`` and by a group which only
the webserver user belongs to, and then making them readable only to
owner and group. For example, if your webserver runs as ``www.www``, do
as follows::
chown -R root.www config/*
find config/ -type f -exec chmod 0440 '{}' \;
b. User Passwords
Unless steps are taken to avoid it, there are two channels by which Horde
Groupware Webmail Edition can cause users to pass their IMAP/POP3
passwords across the network unencrypted.
The first channel is between the browser and the Web server. We strongly
recommend using an SSL-capable Web server to give users the option of
encrypting communications between their browser and the Web server on
which Horde Groupware Webmail Edition is running. Some sites may wish to
disable non-SSL access entirely.
The second channel is between the Web server and their IMAP or POP3
server. The simplest way to avoid this is to have the mail server
running on the same system as the Web server, and configuring Horde
Groupware Webmail Edition to connect to the IMAP or POP3 server on
``localhost`` instead of on the Internet hostname. In cases where that is
not possible, it is highly recommended that the mail server be located on
a private, secure network. Alternatively, the mail server can be accessed
via TLS to ensure that users' passwords remain safe after they have
entrusted them to Horde Groupware Webmail Edition (this is the default
configuration).
Other security steps you can take to increase security include:
* Use session cookies instead of URL based sessions.
* Set your php ``session.entropy_length`` to a larger value (e.g. 16) and
``session.entropy_file`` to a random source (e.g. ``/dev/urandom``)
* If your database, mail server, and web server are on the same host
machine, then:
* Use unix socket database access and disable TCP database access.
* Use ``localhost`` for all TCP/IP connections to avoid the network, or
run all services on a local, private network.
b. Sessions
Session data -- including hashed versions of your users' passwords, in
some applications -- may not be stored as securely as necessary.
If you are using file-based PHP sessions (which are the default), be
sure that session files are not being written into ``/tmp`` with
permissions that allow other users to read them. Ideally, change the
``session.save_path`` setting in ``php.ini`` to a directory only
readable and writeable by your webserver.
Additionally, you can change the session handler of PHP to use any
storage backend requested (e.g. SQL database) via the ``Custom Session
Handler`` tab in the Horde setup.
For more information about securing your webserver, PHP and Horde Groupware
Webmail Edition, see the `docs/SECURITY`_ file.
Temporary Files
===============
Various Horde Groupware Webmail Edition applications will generate temporary
files in PHP's temporary directory (see the ``General`` tab in the Horde
setup). For various reasons, some of these files may not be removed when the
user's session ends. To reclaim this disk space, it may be necessary to
periodically delete these old temporary files.
An example cron-based solution can be found at
``horde/scripts/temp-cleanup.cron`` in PEAR's ``data_dir`` directory. Another
possible solution is to use utilities like ``tmpwatch``, ``tmpreaper`` or
anything similar to remove old files.
Stale sessions are automatically pruned by PHP according to the
`session.gc_probability`_, `session.gc_divisor`_, and
`session.gc_maxlifetime`_ settings located in ``php.ini``. However, the
default settings are very aggressive: the garbage collection routine runs on
average 1% of the time a page is loaded. For most installations, a lower
garbage collection rate is recommended (setting session.gc_divisor to 10,000
or higher is much more reasonable).
Translations
============
Note for international users: Horde Groupware Webmail Edition uses GNU gettext
to provide local translations of text displayed by applications; the
translations are found in the po/ directory. If a translation is not yet
available for your locale (and you wish to create one), or if you're having
trouble using a provided translation, please see the `docs/TRANSLATIONS`_
file for instructions.
Obtaining Support
=================
If you encounter problems with Horde Groupware Webmail Edition, help is
available!
The Horde Frequently Asked Questions List (FAQ), available on the Web at
http://wiki.horde.org/FAQ
The Horde Project runs a number of mailing lists, for individual applications
and for issues relating to the project as a whole. Information, archives, and
subscription information can be found at
http://www.horde.org/community/mail
There is no separate mailing list for Horde Groupware Webmail Edition, please
contact the mailing list of the component you have problems with, or the Horde
mailing list for general problems and questions.
Lastly, Horde developers, contributors and users may also be found on IRC,
on the channel #horde on the Freenode Network (irc.freenode.net).
Please keep in mind that Horde Groupware Webmail Edition is free software
written by volunteers. For information on reasonable support expectations,
please read
http://www.horde.org/community/support
Thanks for using Horde Groupware Webmail Edition!
The Horde Team
.. _README: README
.. _docs/PERFORMANCE: PERFORMANCE
.. _docs/SECURITY: ../../horde/docs/SECURITY
.. _docs/TRANSLATIONS: ../../horde/docs/TRANSLATIONS
.. _`curl extension`: http://php.net/curl
.. _`http extension`: http://php.net/http
.. _`File Uploads`: http://wiki.horde.org/FAQ/Admin/FileUploads
.. _`session.gc_probability`: http://www.php.net/manual/en/session.configuration.php#ini.session.gc-probability
.. _`session.gc_divisor`: http://www.php.net/manual/en/session.configuration.php#ini.session.gc-divisor
.. _`session.gc_maxlifetime`: http://www.php.net/manual/en/session.configuration.php#ini.session.gc-maxlifetime
Copyright 2K16 - 2K18 Indonesian Hacker Rulez
;?>)