| Current Path : /proc/3/task/3/cwd/opt/puppetlabs/puppet/vendor_modules/scheduled_task/ |
| Current File : //proc/3/task/3/cwd/opt/puppetlabs/puppet/vendor_modules/scheduled_task/CONTRIBUTING.md |
# Contributing to Puppet modules
So you want to contribute to a Puppet module: Great! Below are some instructions to get you started doing
that very thing while setting expectations around code quality as well as a few tips for making the
process as easy as possible.
### Table of Contents
1. [Getting Started](#getting-started)
1. [Commit Checklist](#commit-checklist)
1. [Submission](#submission)
1. [More about commits](#more-about-commits)
1. [Testing](#testing)
- [Running Tests](#running-tests)
- [Writing Tests](#writing-tests)
1. [Get Help](#get-help)
## Getting Started
- Fork the module repository on GitHub and clone to your workspace
- Make your changes!
## Commit Checklist
### The Basics
- [x] my commit is a single logical unit of work
- [x] I have checked for unnecessary whitespace with "git diff --check"
- [x] my commit does not include commented out code or unneeded files
### The Content
- [x] my commit includes tests for the bug I fixed or feature I added
- [x] my commit includes appropriate documentation changes if it is introducing a new feature or changing existing functionality
- [x] my code passes existing test suites
### The Commit Message
- [x] the first line of my commit message includes:
- [x] an issue number (if applicable), e.g. "(MODULES-xxxx) This is the first line"
- [x] a short description (50 characters is the soft limit, excluding ticket number(s))
- [x] the body of my commit message:
- [x] is meaningful
- [x] uses the imperative, present tense: "change", not "changed" or "changes"
- [x] includes motivation for the change, and contrasts its implementation with the previous behavior
## Submission
### Pre-requisites
- Make sure you have a [GitHub account](https://github.com/join)
- [Create a ticket](https://tickets.puppet.com/secure/CreateIssue!default.jspa), or [watch the ticket](https://tickets.puppet.com/browse/) you are patching for.
### Push and PR
- Push your changes to your fork
- [Open a Pull Request](https://help.github.com/articles/creating-a-pull-request-from-a-fork/) against the repository in the puppetlabs organization
## More about commits
1. Make separate commits for logically separate changes.
Please break your commits down into logically consistent units
which include new or changed tests relevant to the rest of the
change. The goal of doing this is to make the diff easier to
read for whoever is reviewing your code. In general, the easier
your diff is to read, the more likely someone will be happy to
review it and get it into the code base.
If you are going to refactor a piece of code, please do so as a
separate commit from your feature or bug fix changes.
We also really appreciate changes that include tests to make
sure the bug is not re-introduced, and that the feature is not
accidentally broken.
Describe the technical detail of the change(s). If your
description starts to get too long, that is a good sign that you
probably need to split up your commit into more finely grained
pieces.
Commits which plainly describe the things which help
reviewers check the patch and future developers understand the
code are much more likely to be merged in with a minimum of
bike-shedding or requested changes. Ideally, the commit message
would include information, and be in a form suitable for
inclusion in the release notes for the version of Puppet that
includes them.
Please also check that you are not introducing any trailing
whitespace or other "whitespace errors". You can do this by
running "git diff --check" on your changes before you commit.
2. Sending your patches
To submit your changes via a GitHub pull request, we _highly_
recommend that you have them on a topic branch, instead of
directly on "master".
It makes things much easier to keep track of, especially if
you decide to work on another thing before your first change
is merged in.
GitHub has some pretty good
[general documentation](http://help.github.com/) on using
their site. They also have documentation on
[creating pull requests](https://help.github.com/articles/creating-a-pull-request-from-a-fork/).
In general, after pushing your topic branch up to your
repository on GitHub, you can switch to the branch in the
GitHub UI and click "Pull Request" towards the top of the page
in order to open a pull request.
3. Update the related JIRA issue.
If there is a JIRA issue associated with the change you
submitted, then you should update the ticket to include the
location of your branch, along with any other commentary you
may wish to make.
# Testing
## Getting Started
Our Puppet modules provide [`Gemfile`](./Gemfile)s, which can tell a Ruby package manager such as [bundler](http://bundler.io/) what Ruby packages,
or Gems, are required to build, develop, and test this software.
Please make sure you have [bundler installed](http://bundler.io/#getting-started) on your system, and then use it to
install all dependencies needed for this project in the project root by running
```shell
% bundle install --path .bundle/gems
Fetching gem metadata from https://rubygems.org/........
Fetching gem metadata from https://rubygems.org/..
Using rake (10.1.0)
Using builder (3.2.2)
-- 8><-- many more --><8 --
Using rspec-system-puppet (2.2.0)
Using serverspec (0.6.3)
Using rspec-system-serverspec (1.0.0)
Using bundler (1.3.5)
Your bundle is complete!
Use `bundle show [gemname]` to see where a bundled gem is installed.
```
NOTE: some systems may require you to run this command with sudo.
If you already have those gems installed, make sure they are up-to-date:
```shell
% bundle update
```
## Running Tests
With all dependencies in place and up-to-date, run the tests:
### Unit Tests
```shell
% bundle exec rake spec
```
This executes all the [rspec tests](http://rspec-puppet.com/) in the directories defined [here](https://github.com/puppetlabs/puppetlabs_spec_helper/blob/699d9fbca1d2489bff1736bb254bb7b7edb32c74/lib/puppetlabs_spec_helper/rake_tasks.rb#L17) and so on.
rspec tests may have the same kind of dependencies as the module they are testing. Although the module defines these dependencies in its [metadata.json](./metadata.json),
rspec tests define them in [.fixtures.yml](./fixtures.yml).
### Acceptance Tests
Some Puppet modules also come with acceptance tests, which use [beaker][]. These tests spin up a virtual machine under
[VirtualBox](https://www.virtualbox.org/), controlled with [Vagrant](http://www.vagrantup.com/), to simulate scripted test
scenarios. In order to run these, you need both Virtualbox and Vagrant installed on your system.
Run the tests by issuing the following command
```shell
% bundle exec rake spec_clean
% bundle exec rspec spec/acceptance
```
This will now download a pre-fabricated image configured in the [default node-set](./spec/acceptance/nodesets/default.yml),
install Puppet, copy this module, and install its dependencies per [spec/spec_helper_acceptance.rb](./spec/spec_helper_acceptance.rb)
and then run all the tests under [spec/acceptance](./spec/acceptance).
## Writing Tests
### Unit Tests
When writing unit tests for Puppet, [rspec-puppet][] is your best friend. It provides tons of helper methods for testing your manifests against a
catalog (e.g. contain_file, contain_package, with_params, etc). It would be ridiculous to try and top rspec-puppet's [documentation][rspec-puppet_docs]
but here's a tiny sample:
Sample manifest:
```puppet
file { "a test file":
ensure => present,
path => "/etc/sample",
}
```
Sample test:
```ruby
it 'does a thing' do
expect(subject).to contain_file("a test file").with({:path => "/etc/sample"})
end
```
### Acceptance Tests
Writing acceptance tests for Puppet involves [beaker][] and its cousin [beaker-rspec][]. A common pattern for acceptance tests is to create a test manifest, apply it
twice to check for idempotency or errors, then run expectations.
```ruby
it 'does an end-to-end thing' do
pp = <<-EOF
file { 'a test file':
ensure => present,
path => "/etc/sample",
content => "test string",
}
apply_manifest(pp, :catch_failures => true)
apply_manifest(pp, :catch_changes => true)
end
describe file("/etc/sample") do
it { is_expected.to contain "test string" }
end
```
# If you have commit access to the repository
Even if you have commit access to the repository, you still need to go through the process above, and have someone else review and merge
in your changes. The rule is that **all changes must be reviewed by a project developer that did not write the code to ensure that
all changes go through a code review process.**
The record of someone performing the merge is the record that they performed the code review. Again, this should be someone other than the author of the topic branch.
# Get Help
### On the web
* [Puppet help messageboard](http://puppet.com/community/get-help)
* [Writing tests](https://docs.puppet.com/guides/module_guides/bgtm.html#step-three-module-testing)
* [General GitHub documentation](http://help.github.com/)
* [GitHub pull request documentation](http://help.github.com/send-pull-requests/)
### On chat
* Slack (slack.puppet.com) #forge-modules, #puppet-dev, #windows, #voxpupuli
* IRC (freenode) #puppet-dev, #voxpupuli
[rspec-puppet]: http://rspec-puppet.com/
[rspec-puppet_docs]: http://rspec-puppet.com/documentation/
[beaker]: https://github.com/puppetlabs/beaker
[beaker-rspec]: https://github.com/puppetlabs/beaker-rspec
Copyright 2K16 - 2K18 Indonesian Hacker Rulez
;?>)