Current Path : /proc/3/task/3/cwd/proc/2/cwd/etc/

Upload File :

Current File : //proc/3/task/3/cwd/proc/2/cwd/etc/freshclam.conf

##
## Example config file for freshclam
## Please read the freshclam.conf(5) manual before editing this file.
##


# Comment or remove the line below.
#Example

# Path to the database directory.
# WARNING: It must match clamd.conf's directive!
# Default: hardcoded (depends on installation options)
DatabaseDirectory /var/lib/clamav

# Path to the log file (make sure it has proper permissions)
# Default: disabled
UpdateLogFile /var/log/clamav/freshclam.log

# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
# in bytes just don't use modifiers. If LogFileMaxSize is enabled,
# log rotation (the LogRotate option) will always be enabled.
# Default: 1M
#LogFileMaxSize 2M

# Log time with each message.
# Default: no
#LogTime yes

# Enable verbose logging.
# Default: no
#LogVerbose yes

# Use system logger (can work together with UpdateLogFile).
# Default: no
LogSyslog yes

# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL

# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
# Default: no
#LogRotate yes

# This option allows you to save the process identifier of the daemon
# Default: disabled
#PidFile /var/run/freshclam.pid

# By default when started freshclam drops privileges and switches to the
# "clamav" user. This directive allows you to change the database owner.
# Default: clamav (may depend on installation options)
DatabaseOwner clam

# Initialize supplementary group access (freshclam must be started by root).
# Default: no
#AllowSupplementaryGroups yes

# Use DNS to verify virus database version. Freshclam uses DNS TXT records
# to verify database and software versions. With this directive you can change
# the database verification domain.
# WARNING: Do not touch it unless you're configuring freshclam to use your
# own database verification domain.
# Default: current.cvd.clamav.net
#DNSDatabaseInfo current.cvd.clamav.net

# Uncomment the following line and replace XY with your country
# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
# You can use db.XY.ipv6.clamav.net for IPv6 connections.
#DatabaseMirror db.XY.clamav.net

# database.clamav.net is a round-robin record which points to our most 
# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is 
# not working. DO NOT TOUCH the following line unless you know what you
# are doing.
DatabaseMirror db.local.clamav.net
DatabaseMirror db.local.clamav.net

# How many attempts to make before giving up.
# Default: 3 (per mirror)
#MaxAttempts 5

# With this option you can control scripted updates. It's highly recommended
# to keep it enabled.
# Default: yes
#ScriptedUpdates yes

# By default freshclam will keep the local databases (.cld) uncompressed to
# make their handling faster. With this option you can enable the compression;
# the change will take effect with the next database update.
# Default: no
#CompressLocalDatabase no

# With this option you can provide custom sources (http:// or file://) for
# database files. This option can be used multiple times.
# Default: no custom URLs
#DatabaseCustomURL http://myserver.com/mysigs.ndb
#DatabaseCustomURL file:///mnt/nfs/local.hdb

# This option allows you to easily point freshclam to private mirrors.
# If PrivateMirror is set, freshclam does not attempt to use DNS
# to determine whether its databases are out-of-date, instead it will
# use the If-Modified-Since request or directly check the headers of the
# remote database files. For each database, freshclam first attempts
# to download the CLD file. If that fails, it tries to download the
# CVD file. This option overrides DatabaseMirror, DNSDatabaseInfo
# and ScriptedUpdates. It can be used multiple times to provide
# fall-back mirrors.
# Default: disabled
#PrivateMirror mirror1.mynetwork.com
#PrivateMirror mirror2.mynetwork.com

# Number of database checks per day.
# Default: 12 (every two hours)
#Checks 24

# Proxy settings
# Default: disabled
#HTTPProxyServer myproxy.com
#HTTPProxyPort 1234
#HTTPProxyUsername myusername
#HTTPProxyPassword mypass

# If your servers are behind a firewall/proxy which applies User-Agent
# filtering you can use this option to force the use of a different
# User-Agent header.
# Default: clamav/version_number
#HTTPUserAgent SomeUserAgentIdString

# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
# multi-homed systems.
# Default: Use OS'es default outgoing IP address.
#LocalIPAddress aaa.bbb.ccc.ddd

# Send the RELOAD command to clamd.
# Default: no
#NotifyClamd /path/to/clamd.conf

# Run command after successful database update.
# Default: disabled
#OnUpdateExecute command

# Run command when database update process fails.
# Default: disabled
#OnErrorExecute command

# Run command when freshclam reports outdated version.
# In the command string %v will be replaced by the new version number.
# Default: disabled
#OnOutdatedExecute command

# Don't fork into background.
# Default: no
#Foreground yes

# Enable debug messages in libclamav.
# Default: no
#Debug yes

# Timeout in seconds when connecting to database server.
# Default: 30
#ConnectTimeout 60

# Timeout in seconds when reading from database server.
# Default: 30
#ReceiveTimeout 60

# With this option enabled, freshclam will attempt to load new
# databases into memory to make sure they are properly handled
# by libclamav before replacing the old ones.
# Default: yes
#TestDatabases yes

# When enabled freshclam will submit statistics to the ClamAV Project about
# the latest virus detections in your environment. The ClamAV maintainers
# will then use this data to determine what types of malware are the most
# detected in the field and in what geographic area they are.
# Freshclam will connect to clamd in order to get recent statistics.
# Default: no
#SubmitDetectionStats /path/to/clamd.conf

# Country of origin of malware/detection statistics (for statistical
# purposes only). The statistics collector at ClamAV.net will look up
# your IP address to determine the geographical origin of the malware
# reported by your installation. If this installation is mainly used to
# scan data which comes from a different location, please enable this
# option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
# of the country of origin.
# Default: disabled
#DetectionStatsCountry country-code

# This option enables support for our "Personal Statistics" service. 
# When this option is enabled, the information on malware detected by
# your clamd installation is made available to you through our website.
# To get your HostID, log on http://www.stats.clamav.net and add a new
# host to your host list. Once you have the HostID, uncomment this option
# and paste the HostID here. As soon as your freshclam starts submitting
# information to our stats collecting service, you will be able to view
# the statistics of this clamd installation by logging into
# http://www.stats.clamav.net with the same credentials you used to
# generate the HostID. For more information refer to:
# http://www.clamav.net/documentation.html#cctts 
# This feature requires SubmitDetectionStats to be enabled.
# Default: disabled
#DetectionStatsHostID unique-id

# This option enables support for Google Safe Browsing. When activated for
# the first time, freshclam will download a new database file (safebrowsing.cvd)
# which will be automatically loaded by clamd and clamscan during the next
# reload, provided that the heuristic phishing detection is turned on. This
# database includes information about websites that may be phishing sites or
# possible sources of malware. When using this option, it's mandatory to run
# freshclam at least every 30 minutes.
# Freshclam uses the ClamAV's mirror infrastructure to distribute the
# database and its updates but all the contents are provided under Google's
# terms of use. See http://www.google.com/transparencyreport/safebrowsing
# and http://www.clamav.net/documentation.html#safebrowsing 
# for more information.
# Default: disabled
#SafeBrowsing yes

# This option enables downloading of bytecode.cvd, which includes additional
# detection mechanisms and improvements to the ClamAV engine.
# Default: enabled
#Bytecode yes

# Download an additional 3rd party signature database distributed through
# the ClamAV mirrors. 
# This option can be used multiple times.
#ExtraDatabase dbname1
#ExtraDatabase dbname2

Copyright 2K16 - 2K18 Indonesian Hacker Rulez