| Current Path : /proc/3/task/3/root/proc/3/root/opt/zabbix_scripts/ |
| Current File : //proc/3/task/3/root/proc/3/root/opt/zabbix_scripts/check_ntp.pl |
#!@PERL@ -w
#
# (c)1999 Ian Cass, Knowledge Matters Ltd.
# Read the GNU copyright stuff for all the legalese
#
# Check NTP time servers plugin. This plugin requires the ntpdate utility to
# be installed on the system, however since it's part of the ntp suite, you
# should already have it installed.
#
#
# Nothing clever done in this program - its a very simple bare basics hack to
# get the job done.
#
# Things to do...
# check @words[9] for time differences greater than +/- x secs & return a
# warning.
#
# (c) 1999 Mark Jewiss, Knowledge Matters Limited
# 22-9-1999, 12:45
#
# Modified script to accept 2 parameters or set defaults.
# Now issues warning or critical alert is time difference is greater than the
# time passed.
#
# These changes have not been tested completely due to the unavailability of a
# server with the incorrect time.
#
# (c) 1999 Bo Kersey, VirCIO - Managed Server Solutions <bo@vircio.com>
# 22-10-99, 12:17
#
# Modified the script to give useage if no parameters are input.
#
# Modified the script to check for negative as well as positive
# time differences.
#
# Modified the script to work with ntpdate 3-5.93e Wed Apr 14 20:23:03 EDT 1999
#
# Modified the script to work with ntpdate's that return adjust or offset...
#
#
# Script modified 2000 June 01 by William Pietri <william@bianca.com>
#
# Modified script to handle weird cases:
# o NTP server doesn't respond (e.g., has died)
# o Server has correct time but isn't suitable synchronization
# source. This happens while starting up and if contact
# with master has been lost.
#
# Modifed to run under Embedded Perl (sghosh@users.sf.net)
# - combined logic some blocks together..
#
# Added ntpdate check for stratum 16 desynch peer (James Fidell) Feb 03, 2003
#
# ntpdate - offset is in seconds
# changed ntpdc to ntpq - jitter/dispersion is in milliseconds
#
# Patch for for regex for stratum1 refid.
require 5.004;
use POSIX;
use strict;
use Getopt::Long;
use vars qw($opt_V $opt_h $opt_H $opt_t $opt_w $opt_c $opt_O $opt_j $opt_k $verbose $PROGNAME $def_jitter $ipv4 $ipv6);
use FindBin;
use lib "$FindBin::Bin";
use utils qw($TIMEOUT %ERRORS &print_revision &support);
$PROGNAME="check_ntp";
sub print_help ();
sub print_usage ();
$ENV{'PATH'}='@TRUSTED_PATH@';
$ENV{'BASH_ENV'}='';
$ENV{'ENV'}='';
# defaults in sec
my $DEFAULT_OFFSET_WARN = 60; # 1 minute
my $DEFAULT_OFFSET_CRIT = 120; # 2 minutes
# default in millisec
my $DEFAULT_JITTER_WARN = 5000; # 5 sec
my $DEFAULT_JITTER_CRIT = 10000; # 10 sec
Getopt::Long::Configure('bundling');
GetOptions
("V" => \$opt_V, "version" => \$opt_V,
"h" => \$opt_h, "help" => \$opt_h,
"v" => \$verbose, "verbose" => \$verbose,
"4" => \$ipv4, "use-ipv4" => \$ipv4,
"6" => \$ipv6, "use-ipv6" => \$ipv6,
"w=f" => \$opt_w, "warning=f" => \$opt_w, # offset|adjust warning if above this number
"c=f" => \$opt_c, "critical=f" => \$opt_c, # offset|adjust critical if above this number
"O" => \$opt_O, "zero-offset" => \$opt_O, # zero-offset bad
"j=s" => \$opt_j, "jwarn=i" => \$opt_j, # jitter warning if above this number
"k=s" => \$opt_k, "jcrit=i" => \$opt_k, # jitter critical if above this number
"t=s" => \$opt_t, "timeout=i" => \$opt_t,
"H=s" => \$opt_H, "hostname=s" => \$opt_H);
if ($opt_V) {
print_revision($PROGNAME,'@NP_VERSION@');
exit $ERRORS{'OK'};
}
if ($opt_h) {
print_help();
exit $ERRORS{'OK'};
}
# jitter test params specified
if (defined $opt_j || defined $opt_k ) {
$def_jitter = 1;
}
$opt_H = shift unless ($opt_H);
my $host = $1 if ($opt_H && $opt_H =~ m/^([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+|[a-zA-Z][-a-zA-Z0-9]+(\.[a-zA-Z][-a-zA-Z0-9]+)*)$/);
unless ($host) {
print "No target host specified\n";
print_usage();
exit $ERRORS{'UNKNOWN'};
}
my ($timeout, $owarn, $ocrit, $jwarn, $jcrit);
$timeout = $TIMEOUT;
($opt_t) && ($opt_t =~ /^([0-9]+)$/) && ($timeout = $1);
$owarn = $DEFAULT_OFFSET_WARN;
($opt_w) && ($opt_w =~ /^([0-9.]+)$/) && ($owarn = $1);
$ocrit = $DEFAULT_OFFSET_CRIT;
($opt_c) && ($opt_c =~ /^([0-9.]+)$/) && ($ocrit = $1);
$jwarn = $DEFAULT_JITTER_WARN;
($opt_j) && ($opt_j =~ /^([0-9]+)$/) && ($jwarn = $1);
$jcrit = $DEFAULT_JITTER_CRIT;
($opt_k) && ($opt_k =~ /^([0-9]+)$/) && ($jcrit = $1);
if ($ocrit < $owarn ) {
print "Critical offset should be larger than warning offset\n";
print_usage();
exit $ERRORS{"UNKNOWN"};
}
if ($def_jitter) {
if ($opt_k < $opt_j) {
print "Critical jitter should be larger than warning jitter\n";
print_usage();
exit $ERRORS{'UNKNOWN'};
}
}
my $stratum = -1;
my $ignoreret = 0;
my $answer = undef;
my $offset = undef;
my $jitter = undef;
my $syspeer = undef;
my $candidate = 0;
my @candidates;
my $msg; # first line of output to print if format is invalid
my $state = $ERRORS{'UNKNOWN'};
my $ntpdate_error = $ERRORS{'UNKNOWN'};
my $jitter_error = $ERRORS{'UNKNOWN'};
# some systems don't have a proper ntpq (migrated from ntpdc)
my $have_ntpq = undef;
if ($utils::PATH_TO_NTPQ && -x $utils::PATH_TO_NTPQ ) {
$have_ntpq = 1;
}else{
$have_ntpq = 0;
}
# Just in case of problems, let's not hang Nagios
$SIG{'ALRM'} = sub {
print ("ERROR: No response from ntp server (alarm)\n");
exit $ERRORS{"UNKNOWN"};
};
alarm($timeout);
# Determine protocol to be used for ntpdate and ntpq
my $ntpdate = $utils::PATH_TO_NTPDATE;
my $ntpq = $utils::PATH_TO_NTPQ;
if ($ipv4) {
$ntpdate .= " -4";
$ntpq .= " -4";
}
elsif ($ipv6) {
$ntpdate .= " -6";
$ntpq .= " -6";
}
# else don't use any flags
###
###
### First, check ntpdate
###
###
if (!open (NTPDATE, $ntpdate . " -q $host 2>&1 |")) {
print "Could not open $ntpdate: $!\n";
exit $ERRORS{"UNKNOWN"};
}
my $out;
while (<NTPDATE>) {
#print if ($verbose); # noop
$msg = $_ unless ($msg);
$out .= "$_ ";
if (/stratum\s(\d+)/) {
$stratum = $1;
}
if (/(offset|adjust)\s+([-.\d]+)/i) {
$offset = $2;
# An offset of 0.000000 with an error is probably bogus. Actually,
# it's probably always bogus, but let's be paranoid here.
# Has been reported that 0.0000 happens in a production environment
# on Solaris 8 so this check should be taken out - SF tracker 1150777
if (defined $opt_O ) {
if ($offset == 0) { undef $offset;}
}
$ntpdate_error = defined ($offset) ? $ERRORS{"OK"} : $ERRORS{"CRITICAL"};
print "ntperr = $ntpdate_error \n" if $verbose;
}
if (/no server suitable for synchronization found/) {
if ($stratum == 16) {
$ntpdate_error = $ERRORS{"WARNING"};
$msg = "Desynchronized peer server found";
$ignoreret=1;
}
else {
$ntpdate_error = $ERRORS{"CRITICAL"};
$msg = "No suitable peer server found - ";
}
}
}
$out =~ s/\n//g;
close (NTPDATE) ||
die $! ? "$out - Error closing $ntpdate pipe: $!"
: "$out - Exit status: $? from $ntpdate\n";
# declare an error if we also get a non-zero return code from ntpdate
# unless already set to critical
if ( $? && !$ignoreret ) {
print "stderr = $? : $! \n" if $verbose;
$ntpdate_error = $ntpdate_error == $ERRORS{"CRITICAL"} ? $ERRORS{"CRITICAL"} : $ERRORS{"UNKNOWN"} ;
print "ntperr = $ntpdate_error : $!\n" if $verbose;
}
###
###
### Then scan xntpq/ntpq if it exists
### and look in the 11th column for jitter
###
# Field 1: Tally Code ( Space, 'x','.','-','+','#','*','o')
# Only match for '*' which implies sys.peer
# or 'o' which implies pps.peer
# If both exist, the last one is picked.
# Field 2: address of the remote peer
# Field 3: Refid of the clock (0.0.0.0 if unknown, WWWV/PPS/GPS/ACTS/USNO/PCS/... if Stratum1)
# Field 4: stratum (0-15)
# Field 5: Type of the peer: local (l), unicast (u), multicast (m)
# broadcast (b); not sure about multicast/broadcast
# Field 6: last packet receive (in seconds)
# Field 7: polling interval
# Field 8: reachability resgister (octal)
# Field 9: delay
# Field 10: offset
# Field 11: dispersion/jitter
#
# According to bug 773588 Some solaris xntpd implementations seemto match on
# "#" even though the docs say it exceeds maximum distance. Providing patch
# here which will generate a warining.
if ($have_ntpq) {
if ( open(NTPQ, $ntpq . " -np $host 2>&1 |") ) {
while (<NTPQ>) {
print $_ if ($verbose);
if ( /timed out/ ){
$have_ntpq = 0 ;
last ;
}
# number of candidates on <host> for sys.peer
if (/^(\*|\+|\#|o])/) {
++$candidate;
push (@candidates, $_);
print "Candidate count= $candidate\n" if ($verbose);
}
# match sys.peer or pps.peer
if (/^(\*|o)(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)/) {
$syspeer = $2;
$stratum = $4;
$jitter = $11;
print "match $_ \n" if $verbose;
if ($jitter > $jcrit) {
print "Jitter_crit = $11 :$jcrit\n" if ($verbose);
$jitter_error = $ERRORS{'CRITICAL'};
} elsif ($jitter > $jwarn ) {
print "Jitter_warn = $11 :$jwarn\n" if ($verbose);
$jitter_error = $ERRORS{'WARNING'};
} else {
$jitter_error = $ERRORS{'OK'};
}
} else {
print "No match!\n" if $verbose;
}
}
close NTPQ ||
die $! ? "Error closing $ntpq pipe: $!"
: "Exit status: $? from $ntpq\n";
# if we did not match sys.peer or pps.peer but matched # candidates only
# generate a warning
# based on bug id 773588
unless (defined $syspeer) {
if ($#candidates >=0) {
foreach my $c (@candidates) {
$c =~ /^(#)([-0-9.\s]+)\s+([-0-9A-Za-z_().]+)\s+([-0-9.]+)\s+([lumb-]+)\s+([-0-9m.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)/;
$syspeer = $2;
$stratum = $4;
$jitter = $11;
print "candidate match $c \n" if $verbose;
if ($jitter > $jcrit) {
print "Candidate match - Jitter_crit = $11 :$jcrit\n" if ($verbose);
$jitter_error = $ERRORS{'CRITICAL'};
}elsif ($jitter > $jwarn ) {
print "Candidate match - Jitter_warn = $11 :$jwarn \n" if ($verbose);
$jitter_error = $ERRORS{'WARNING'};
} else {
$jitter_error = $ERRORS{'WARNING'};
}
}
}
}
}
}
if ($ntpdate_error != $ERRORS{'OK'}) {
$state = $ntpdate_error;
if ($ntpdate_error == $ERRORS{'WARNING'} ) {
$answer = $msg;
}
else {
$answer = $msg . "Server for ntp probably down";
}
if (defined($offset) && abs($offset) > $ocrit) {
$state = $ERRORS{'CRITICAL'};
$answer = "Server Error and offset $offset sec > +/- $ocrit sec";
} elsif (defined($offset) && abs($offset) > $owarn) {
$answer = "Server error and offset $offset sec > +/- $owarn sec";
} elsif (defined($jitter) && abs($jitter) > $jcrit) {
$answer = "Server error and jitter $jitter msec > +/- $jcrit msec";
} elsif (defined($jitter) && abs($jitter) > $jwarn) {
$answer = "Server error and jitter $jitter msec > +/- $jwarn msec";
}
} elsif ($have_ntpq && $jitter_error != $ERRORS{'OK'}) {
$state = $jitter_error;
$answer = "Jitter $jitter too high";
if (defined($offset) && abs($offset) > $ocrit) {
$state = $ERRORS{'CRITICAL'};
$answer = "Jitter error and offset $offset sec > +/- $ocrit sec";
} elsif (defined($offset) && abs($offset) > $owarn) {
$answer = "Jitter error and offset $offset sec > +/- $owarn sec";
} elsif (defined($jitter) && abs($jitter) > $jcrit) {
$answer = "Jitter error and jitter $jitter msec > +/- $jcrit msec";
} elsif (defined($jitter) && abs($jitter) > $jwarn) {
$answer = "Jitter error and jitter $jitter msec > +/- $jwarn msec";
}
} elsif( !$have_ntpq ) { # no errors from ntpdate and no ntpq or ntpq timed out
if (abs($offset) > $ocrit) {
$state = $ERRORS{'CRITICAL'};
$answer = "Offset $offset sec > +/- $ocrit sec";
} elsif (abs($offset) > $owarn) {
$state = $ERRORS{'WARNING'};
$answer = "Offset $offset sec > +/- $owarn sec";
} elsif (( abs($offset) > $owarn) && $def_jitter ) {
$state = $ERRORS{'WARNING'};
$answer = "Offset $offset sec > +/- $owarn sec, ntpq timed out";
} elsif ( $def_jitter ) {
$state = $ERRORS{'WARNING'};
$answer = "Offset $offset secs, ntpq timed out";
} else{
$state = $ERRORS{'OK'};
$answer = "Offset $offset secs";
}
} else { # no errors from ntpdate or ntpq
if (abs($offset) > $ocrit) {
$state = $ERRORS{'CRITICAL'};
$answer = "Offset $offset sec > +/- $ocrit sec, jitter $jitter msec";
} elsif (abs($jitter) > $jcrit ) {
$state = $ERRORS{'CRITICAL'};
$answer = "Jitter $jitter msec> +/- $jcrit msec, offset $offset sec";
} elsif (abs($offset) > $owarn) {
$state = $ERRORS{'WARNING'};
$answer = "Offset $offset sec > +/- $owarn sec, jitter $jitter msec";
} elsif (abs($jitter) > $jwarn ) {
$state = $ERRORS{'WARNING'};
$answer = "Jitter $jitter msec> +/- $jwarn msec, offset $offset sec";
} else {
$state = $ERRORS{'OK'};
$answer = "Offset $offset secs, jitter $jitter msec, peer is stratum $stratum";
}
}
foreach my $key (keys %ERRORS) {
if ($state==$ERRORS{$key}) {
# print ("NTP $key: $answer");
print ("NTP $key: $answer|offset=$offset, jitter=" . $jitter/1000 . ",peer_stratum=$stratum\n");
last;
}
}
exit $state;
####
#### subs
sub print_usage () {
print "Usage: $PROGNAME -H <host> [-46] [-O] [-w <warn>] [-c <crit>] [-j <warn>] [-k <crit>] [-v verbose]\n";
}
sub print_help () {
print_revision($PROGNAME,'@NP_VERSION@');
print "Copyright (c) 2003 Bo Kersey/Karl DeBisschop\n";
print "\n";
print_usage();
print "
Checks the local timestamp offset versus <host> with ntpdate
Checks the jitter/dispersion of clock signal between <host> and its sys.peer with ntpq\n
-O (--zero-offset)
A zero offset on \"ntpdate\" will generate a CRITICAL.\n
-w (--warning)
Clock offset in seconds at which a warning message will be generated.\n Defaults to $DEFAULT_OFFSET_WARN.
-c (--critical)
Clock offset in seconds at which a critical message will be generated.\n Defaults to $DEFAULT_OFFSET_CRIT.
-j (--jwarn)
Clock jitter in milliseconds at which a warning message will be generated.\n Defaults to $DEFAULT_JITTER_WARN.
-k (--jcrit)
Clock jitter in milliseconds at which a critical message will be generated.\n Defaults to $DEFAULT_JITTER_CRIT.
If jitter/dispersion is specified with -j or -k and ntpq times out, then a
warning is returned.\n
-4 (--use-ipv4)
Use IPv4 connection
-6 (--use-ipv6)
Use IPv6 connection
\n";
support();
}
Copyright 2K16 - 2K18 Indonesian Hacker Rulez
;?>)