| Current Path : /usr/share/automake-1.11/am/ |
| Current File : //usr/share/automake-1.11/am/texinfos.am |
## automake - create Makefile.in from Makefile.am
## Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
## 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2, or (at your option)
## any later version.
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
## You should have received a copy of the GNU General Public License
## along with this program. If not, see <http://www.gnu.org/licenses/>.
## ----------- ##
## Variables. ##
## ----------- ##
if %?LOCAL-TEXIS%
if ! %?CYGNUS%
TEXI2DVI = texi2dvi
else %?CYGNUS%
## Find these programs wherever they may lie. Yes, this has
## intimate knowledge of the structure of the texinfo distribution.
MAKEINFO = `if test -f $(top_builddir)/../texinfo/makeinfo/makeinfo; then \
echo $(top_builddir)/../texinfo/makeinfo/makeinfo; \
else \
echo makeinfo; \
fi`
TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then \
echo $(top_srcdir)/../texinfo/util/texi2dvi; \
else \
echo texi2dvi; \
fi`
endif %?CYGNUS%
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
endif %?LOCAL-TEXIS%
## ---------- ##
## Building. ##
## ---------- ##
## The way to make PostScript, for those who want it.
if %?LOCAL-TEXIS%
DVIPS = dvips
.dvi.ps:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) -o $@ $<
endif %?LOCAL-TEXIS%
.PHONY: dvi dvi-am html html-am info info-am pdf pdf-am ps ps-am
if %?SUBDIRS%
RECURSIVE_TARGETS += dvi-recursive html-recursive info-recursive
RECURSIVE_TARGETS += pdf-recursive ps-recursive
dvi: dvi-recursive
html: html-recursive
info: info-recursive
pdf: pdf-recursive
ps: ps-recursive
else !%?SUBDIRS%
dvi: dvi-am
html: html-am
info: info-am
pdf: pdf-am
ps: ps-am
endif !%?SUBDIRS%
if %?LOCAL-TEXIS%
dvi-am: $(DVIS)
html-am: $(HTMLS)
info-am: $(INFO_DEPS)
pdf-am: $(PDFS)
ps-am: $(PSS)
else ! %?LOCAL-TEXIS%
dvi-am:
html-am:
info-am:
pdf-am:
ps-am:
endif ! %?LOCAL-TEXIS%
## ------------ ##
## Installing. ##
## ------------ ##
## Look in both . and srcdir because the info pages might have been
## rebuilt in the build directory. Can't cd to srcdir; that might
## break a possible install-sh reference.
##
## Funny name due to --cygnus influence; we want to reserve
## `install-info' for the user.
##
## TEXINFOS primary are always installed in infodir, hence install-data
## is hard coded.
if %?INSTALL-INFO%
if %?LOCAL-TEXIS%
am__installdirs += "$(DESTDIR)$(infodir)"
install-data-am: install-info-am
endif %?LOCAL-TEXIS%
endif %?INSTALL-INFO%
.PHONY: \
install-dvi install-dvi-am \
install-html install-html-am \
install-info install-info-am \
install-pdf install-pdf-am \
install-ps install-ps-am
if %?SUBDIRS%
RECURSIVE_TARGETS += \
install-dvi-recursive \
install-html-recursive \
install-info-recursive \
install-pdf-recursive \
install-ps-recursive
install-dvi: install-dvi-recursive
install-html: install-html-recursive
install-info: install-info-recursive
install-pdf: install-pdf-recursive
install-ps: install-ps-recursive
else !%?SUBDIRS%
install-dvi: install-dvi-am
install-html: install-html-am
install-info: install-info-am
install-pdf: install-pdf-am
install-ps: install-ps-am
endif !%?SUBDIRS%
if %?LOCAL-TEXIS%
include inst-vars.am
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
done
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d$$p"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
## Strip possible $(srcdir) prefix.
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
## 8+3 filesystems cannot deal with foo.info-N filenames: they all
## conflict. DJGPP comes with a tool, DJTAR, that will rename these
## files to foo.iNN while extracting the archive. DJGPP's makeinfo
## is patched to grok these filenames. However we have to account
## for the renaming when installing the info files.
##
## If $file == foo.info, then $file_i == foo.i. The reason we use two
## shell commands instead of one ('s|\.info$$|.i|') is so that a suffix-less
## `foo' becomes `foo.i' too.
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
echo "$$ifile"; \
else : ; fi; \
done; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
## Only run this code if install-info actually exists, and it is not
## the Debian install-info. FIXME: once Debian install-info goes
## away, we can remove this hack. Some versions of Debian install-info
## print their version on stderr (e.g. 1.8.3), other do it in
## on stdout (e.g. 1.10.15).
##
## Do not use
## install-info --version 2>&1 | sed 1q | grep -v -i debian
## as if install-info does not exist, grep -v will be happy, and
## therefore the code will be triggered although install-info is missing.
@if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
## Strip directory
relfile=`echo "$$file" | sed 's|^.*/||'`; \
## Run `:' after install-info in case install-info fails. We really
## don't care about failures here, because they can be spurious. For
## instance if you don't have a dir file, install-info will fail. I
## think instead it should create a new dir file for you. This bug
## causes the `make distcheck' target to fail reliably.
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
## Use `|| :' here because Sun make passes -e to sh; if install-info
## fails then we'd fail if we used `;'.
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
else ! %?LOCAL-TEXIS%
install-dvi-am:
install-html-am:
install-info-am:
install-pdf-am:
install-ps-am:
endif ! %?LOCAL-TEXIS%
## -------------- ##
## Uninstalling. ##
## -------------- ##
if %?LOCAL-TEXIS%
.PHONY uninstall-am: \
uninstall-dvi-am \
uninstall-html-am \
uninstall-info-am \
uninstall-ps-am \
uninstall-pdf-am
uninstall-dvi-am:
@$(NORMAL_UNINSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
rm -f "$(DESTDIR)$(dvidir)/$$f"; \
done
uninstall-html-am:
@$(NORMAL_UNINSTALL)
@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
## $f can be a directory, hence the -r.
echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
done
uninstall-info-am:
@$(PRE_UNINSTALL)
## Run two loops here so that we can handle PRE_UNINSTALL and
## NORMAL_UNINSTALL correctly.
@if test -d '$(DESTDIR)$(infodir)' && \
(install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
## install-info needs the actual info file. We use the installed one,
## rather than relying on one still being in srcdir or builddir.
## However, `make uninstall && make uninstall' should not fail,
## so we ignore failure if the file did not exist.
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
## DJGPP-style info files. See comment in install-info-am.
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
uninstall-pdf-am:
@$(NORMAL_UNINSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
done
uninstall-ps-am:
@$(NORMAL_UNINSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
rm -f "$(DESTDIR)$(psdir)/$$f"; \
done
endif %?LOCAL-TEXIS%
if %?LOCAL-TEXIS%
.PHONY: dist-info
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
## Strip possible $(srcdir) prefix.
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
if test -f $$file; then \
## Strip leading '$$d/'.
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f "$(distdir)/$$relfile" || \
cp -p $$file "$(distdir)/$$relfile"; \
else :; fi; \
done; \
done
endif %?LOCAL-TEXIS%
## ---------- ##
## Cleaning. ##
## ---------- ##
## The funny name is due to --cygnus influence; in Cygnus mode,
## `clean-info' is a target that users can use.
if %?LOCAL-TEXIS%
.PHONY mostlyclean-am: mostlyclean-aminfo
.PHONY: mostlyclean-aminfo
mostlyclean-aminfo:
## Use `-rf', not just `-f', because the %*CLEAN% substitutions can also
## contain any directory created by `makeinfo --html'.
-rm -rf %MOSTLYCLEAN%
.PHONY clean-am: clean-aminfo
clean-aminfo:
## Use `-rf', not just `-f', because the %*CLEAN% substitutions can also
## contain any directory created by `makeinfo --html'.
?TEXICLEAN? -test -z "%TEXICLEAN%" \
?TEXICLEAN? || rm -rf %TEXICLEAN%
.PHONY maintainer-clean-am: maintainer-clean-aminfo
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
## .iNN files are DJGPP-style info files.
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
## Use `-rf', not just `-f', because the %*CLEAN% substitutions can also
## contain any directory created by `makeinfo --html'.
?MAINTCLEAN? -test -z "%MAINTCLEAN%" \
?MAINTCLEAN? || rm -rf %MAINTCLEAN%
?CYGNUS?.PHONY: clean-info
?CYGNUS?clean-info: mostlyclean-aminfo clean-aminfo
endif %?LOCAL-TEXIS%
Copyright 2K16 - 2K18 Indonesian Hacker Rulez
;?>)