| Current Path : /usr/share/doc/bind-9.8.2/arm/ |
| Current File : //usr/share/doc/bind-9.8.2/arm/Makefile |
# Copyright (C) 2004-2007, 2009 Internet Systems Consortium, Inc. ("ISC")
# Copyright (C) 2001, 2002 Internet Software Consortium.
#
# Permission to use, copy, modify, and/or distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
# AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.
# $Id: Makefile.in,v 1.22 2009-02-12 23:47:56 tbox Exp $
srcdir = .
top_srcdir = ../..
# Copyright (C) 2004-2009, 2011 Internet Systems Consortium, Inc. ("ISC")
# Copyright (C) 1998-2003 Internet Software Consortium.
#
# Permission to use, copy, modify, and/or distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
# AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.
# $Id: rules.in,v 1.68.346.3 2011-12-20 05:25:58 marka Exp $
###
### Common Makefile rules for BIND 9.
###
###
### Paths
###
### Note: paths that vary by Makefile MUST NOT be listed
### here, or they won't get expanded correctly.
prefix = /usr
exec_prefix = /usr
bindir = /usr/bin
sbindir = /usr/sbin
includedir = /usr/include
libdir = /usr/lib64
sysconfdir = /etc
localstatedir = /var
mandir = /usr/share/man
datarootdir = ${prefix}/share
export_libdir = ${exec_prefix}/lib/bind9/
export_includedir = ${prefix}/include/bind9/
DESTDIR =
top_builddir = /builddir/build/BUILD/bind-9.8.2rc1
###
### All
###
### Makefile may define:
### TARGETS
all: subdirs ${TARGETS} testdirs
###
### Subdirectories
###
### Makefile may define:
### SUBDIRS
ALL_SUBDIRS = ${SUBDIRS} nulldir
ALL_TESTDIRS = ${TESTDIRS} nulldir
#
# We use a single-colon rule so that additional dependencies of
# subdirectories can be specified after the inclusion of this file.
# The "depend" and "testdirs" targets are treated the same way.
#
subdirs:
@for i in ${ALL_SUBDIRS}; do \
if [ "$$i" != "nulldir" -a -d $$i ]; then \
echo "making all in `pwd`/$$i"; \
(cd $$i; ${MAKE} ${MAKEDEFS} DESTDIR="${DESTDIR}" all) || exit 1; \
fi; \
done
#
# Tests are built after the targets instead of before
#
testdirs:
@for i in ${ALL_TESTDIRS}; do \
if [ "$$i" != "nulldir" -a -d $$i ]; then \
echo "making all in `pwd`/$$i"; \
(cd $$i; ${MAKE} ${MAKEDEFS} DESTDIR="${DESTDIR}" all) || exit 1; \
fi; \
done
install:: all
install clean distclean maintainer-clean doc docclean man manclean::
@for i in ${ALL_SUBDIRS}; do \
if [ "$$i" != "nulldir" -a -d $$i ]; then \
echo "making $@ in `pwd`/$$i"; \
(cd $$i; ${MAKE} ${MAKEDEFS} DESTDIR="${DESTDIR}" $@) || exit 1; \
fi; \
done
###
### C Programs
###
### Makefile must define
### CC
### Makefile may define
### CFLAGS
### LDFLAGS
### CINCLUDES
### CDEFINES
### CWARNINGS
### User may define externally
### EXT_CFLAGS
CC = gcc
CFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -I/usr/include/libxml2
LDFLAGS =
STD_CINCLUDES =
STD_CDEFINES = -DDIG_SIGCHASE -D_GNU_SOURCE
STD_CWARNINGS = -W -Wall -Wmissing-prototypes -Wcast-qual -Wwrite-strings -Wformat -Wpointer-arith -fno-strict-aliasing
BUILD_CC = gcc
BUILD_CFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -I/usr/include/libxml2
BUILD_CPPFLAGS = -DDIG_SIGCHASE -D_GNU_SOURCE
BUILD_LDFLAGS =
BUILD_LIBS = -ldl -lcap -lpthread -lxml2 -lz -lm
.SUFFIXES:
.SUFFIXES: .c .lo
ALWAYS_INCLUDES = -I${top_builddir}
ALWAYS_DEFINES = -D_REENTRANT
ALWAYS_WARNINGS =
ALL_CPPFLAGS = \
${ALWAYS_INCLUDES} ${CINCLUDES} ${STD_CINCLUDES} \
${ALWAYS_DEFINES} ${CDEFINES} ${STD_CDEFINES}
ALL_CFLAGS = ${EXT_CFLAGS} ${ALL_CPPFLAGS} ${CFLAGS} \
${ALWAYS_WARNINGS} ${STD_CWARNINGS} ${CWARNINGS}
.c.lo:
${LIBTOOL_MODE_COMPILE} ${CC} ${ALL_CFLAGS} -c $<
SHELL = /bin/sh
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBTOOL_MODE_COMPILE = ${LIBTOOL} --mode=compile --tag=CC
LIBTOOL_MODE_INSTALL = ${LIBTOOL} --mode=install --tag=CC
LIBTOOL_MODE_LINK = ${LIBTOOL} --mode=link --tag=CC
PURIFY =
MKDEP = ${SHELL} ${top_builddir}/make/mkdep
###
### This is a template compound command to build an executable binary with
### an internal symbol table.
### This process is tricky. We first link all objects including a tentative
### empty symbol table, then get a tentative list of symbols from the resulting
### binary ($@tmp0). Next, we re-link all objects, but this time with the
### symbol table just created ($tmp@1). The set of symbols should be the same,
### but the corresponding addresses would be changed due to the difference on
### the size of symbol tables. So we create the symbol table and re-create the
### objects once again. Finally, we check the symbol table embedded in the
### final binaryis consistent with the binary itself; otherwise the process is
### terminated.
###
### To minimize the overhead of creating symbol tables, the autoconf switch
### --enable-symtable takes an argument so that the symbol table can be created
### on a per application basis: unless the argument is set to "all", the symbol
### table is created only when a shell (environment) variable "MAKE_SYMTABLE" is
### set to a non-null value in the rule to build the executable binary.
###
### Each Makefile.in that uses this macro is expected to define "LIBS" and
### "NOSYMLIBS"; the former includes libisc with an empty symbol table, and
### the latter includes libisc without the definition of a symbol table.
### The rule to make the executable binary will look like this
### binary: ${OBJS}
### #export MAKE_SYMTABLE="yes"; \ <- enable if symtable is always needed
### export BASEOBJS="${OBJS}"; \
### ${FINALBUILDCMD}
###
### Normally, ${LIBS} includes all necessary libraries to build the binary;
### there are some exceptions however, where the rule lists some of the
### necessary libraries explicitly in addition to (or instead of) ${LIBS},
### like this:
### binary: ${OBJS}
### cc -o $@ ${OBJS} ${OTHERLIB1} ${OTHERLIB2} ${lIBS}
### in order to modify such a rule to use this compound command, a separate
### variable "LIBS0" should be deinfed for the explicitly listed libraries,
### while making sure ${LIBS} still includes libisc. So the above rule would
### be modified as follows:
### binary: ${OBJS}
### export BASEOBJS="${OBJS}"; \
### export LIBS0="${OTHERLIB1} ${OTHERLIB2}"; \
### ${FINALBUILDCMD}
### See bin/check/Makefile.in for a complete example of the use of LIBS0.
###
FINALBUILDCMD = if [ X"${MKSYMTBL_PROGRAM}" = X -o X"$${MAKE_SYMTABLE:-${ALWAYS_MAKE_SYMTABLE}}" = X ] ; then \
${LIBTOOL_MODE_LINK} ${PURIFY} ${CC} ${CFLAGS} ${LDFLAGS} \
-o $@ $${BASEOBJS} $${LIBS0} ${LIBS}; \
else \
rm -f $@tmp0; \
${LIBTOOL_MODE_LINK} ${PURIFY} ${CC} ${CFLAGS} ${LDFLAGS} \
-o $@tmp0 $${BASEOBJS} $${LIBS0} ${LIBS} || exit 1; \
rm -f $@-symtbl.c $@-symtbl.lo; \
${MKSYMTBL_PROGRAM} ${top_srcdir}/util/mksymtbl.pl \
-o $@-symtbl.c $@tmp0 || exit 1; \
$(MAKE) $@-symtbl.lo || exit 1; \
rm -f $@tmp1; \
${LIBTOOL_MODE_LINK} ${PURIFY} ${CC} ${CFLAGS} ${LDFLAGS} \
-o $@tmp1 $${BASEOBJS} $@-symtbl.lo $${LIBS0} ${NOSYMLIBS} || exit 1; \
rm -f $@-symtbl.c $@-symtbl.lo; \
${MKSYMTBL_PROGRAM} ${top_srcdir}/util/mksymtbl.pl \
-o $@-symtbl.c $@tmp1 || exit 1; \
$(MAKE) $@-symtbl.lo || exit 1; \
${LIBTOOL_MODE_LINK} ${PURIFY} ${CC} ${CFLAGS} ${LDFLAGS} \
-o $@tmp2 $${BASEOBJS} $@-symtbl.lo $${LIBS0} ${NOSYMLIBS}; \
${MKSYMTBL_PROGRAM} ${top_srcdir}/util/mksymtbl.pl \
-o $@-symtbl2.c $@tmp2; \
diff $@-symtbl.c $@-symtbl2.c || exit 1;\
mv $@tmp2 $@; \
rm -f $@tmp0 $@tmp1 $@tmp2 $@-symtbl2.c; \
fi
cleandir: distclean
superclean: maintainer-clean
clean distclean maintainer-clean::
rm -f *.lo *.o *.lo *.la core *.core *-symtbl.c *tmp0 *tmp1 *tmp2
rm -rf .depend .libs
distclean maintainer-clean::
rm -f Makefile
depend:
@for i in ${ALL_SUBDIRS}; do \
if [ "$$i" != "nulldir" -a -d $$i ]; then \
echo "making depend in `pwd`/$$i"; \
(cd $$i; ${MAKE} ${MAKEDEFS} DESTDIR="${DESTDIR}" $@) || exit 1; \
fi; \
done
@if [ X"${srcdir}" != X. ] ; then \
if [ X"${SRCS}" != X -a X"${PSRCS}" != X ] ; then \
echo ${MKDEP} -vpath ${srcdir} ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${SRCS}; \
${MKDEP} -vpath ${srcdir} ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${SRCS}; \
echo ${MKDEP} -vpath ${srcdir} -ap ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${PSRCS}; \
${MKDEP} -vpath ${srcdir} -ap ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${PSRCS}; \
${DEPENDEXTRA} \
elif [ X"${SRCS}" != X ] ; then \
echo ${MKDEP} -vpath ${srcdir} ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${SRCS}; \
${MKDEP} -vpath ${srcdir} ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${SRCS}; \
${DEPENDEXTRA} \
elif [ X"${PSRCS}" != X ] ; then \
echo ${MKDEP} -vpath ${srcdir} ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${PSRCS}; \
${MKDEP} -vpath ${srcdir} -p ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${PSRCS}; \
${DEPENDEXTRA} \
fi \
else \
if [ X"${SRCS}" != X -a X"${PSRCS}" != X ] ; then \
echo ${MKDEP} ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${SRCS}; \
${MKDEP} ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${SRCS}; \
echo ${MKDEP} -ap ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${PSRCS}; \
${MKDEP} -ap ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${PSRCS}; \
${DEPENDEXTRA} \
elif [ X"${SRCS}" != X ] ; then \
echo ${MKDEP} ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${SRCS}; \
${MKDEP} ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${SRCS}; \
${DEPENDEXTRA} \
elif [ X"${PSRCS}" != X ] ; then \
echo ${MKDEP} ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${PSRCS}; \
${MKDEP} -p ${ALL_CPPFLAGS} ${ALL_CFLAGS} ${PSRCS}; \
${DEPENDEXTRA} \
fi \
fi
FORCE:
###
### Libraries
###
AR = /usr/bin/ar
ARFLAGS = cruv
RANLIB = ranlib
###
### Installation
###
INSTALL = /usr/bin/install -c
INSTALL_PROGRAM = ${INSTALL}
LINK_PROGRAM = ln -s
INSTALL_SCRIPT = ${INSTALL}
INSTALL_DATA = ${INSTALL} -m 644
###
### Programs used when generating documentation. It's ok for these
### not to exist when not generating documentation.
###
XSLTPROC = /usr/bin/xsltproc --novalid --xinclude --nonet
PERL = /usr/bin/perl
LATEX = latex
PDFLATEX = pdflatex
W3M = w3m
###
### Script language program used to create internal symbol tables
###
MKSYMTBL_PROGRAM =
###
### Switch to create internal symbol table selectively
###
ALWAYS_MAKE_SYMTABLE =
###
### DocBook -> HTML
### DocBook -> man page
###
.SUFFIXES: .docbook .html .1 .2 .3 .4 .5 .6 .7 .8
.docbook.html:
${XSLTPROC} -o $@ ${top_srcdir}/doc/xsl/isc-docbook-html.xsl $<
.docbook.1:
${XSLTPROC} -o $@ ${top_srcdir}/doc/xsl/isc-manpage.xsl $<
.docbook.2:
${XSLTPROC} -o $@ ${top_srcdir}/doc/xsl/isc-manpage.xsl $<
.docbook.3:
${XSLTPROC} -o $@ ${top_srcdir}/doc/xsl/isc-manpage.xsl $<
.docbook.4:
${XSLTPROC} -o $@ ${top_srcdir}/doc/xsl/isc-manpage.xsl $<
.docbook.5:
${XSLTPROC} -o $@ ${top_srcdir}/doc/xsl/isc-manpage.xsl $<
.docbook.6:
${XSLTPROC} -o $@ ${top_srcdir}/doc/xsl/isc-manpage.xsl $<
.docbook.7:
${XSLTPROC} -o $@ ${top_srcdir}/doc/xsl/isc-manpage.xsl $<
.docbook.8:
${XSLTPROC} -o $@ ${top_srcdir}/doc/xsl/isc-manpage.xsl $<
VERSION=9.8.2rc1-RedHat-9.8.2-0.68.rc1.el6_10.8
MANOBJS = Bv9ARM.html
PDFOBJS = Bv9ARM.pdf
doc man:: ${MANOBJS} ${PDFOBJS}
clean::
rm -f Bv9ARM.aux Bv9ARM.brf Bv9ARM.glo Bv9ARM.idx Bv9ARM.toc
rm -f Bv9ARM.log Bv9ARM.out Bv9ARM.tex Bv9ARM.tex.tmp
docclean manclean maintainer-clean:: clean
rm -f *.html ${PDFOBJS}
docclean manclean maintainer-clean distclean::
rm -f releaseinfo.xml
Bv9ARM.html: Bv9ARM-book.xml releaseinfo.xml
expand Bv9ARM-book.xml | \
${XSLTPROC} --stringparam root.filename Bv9ARM \
${top_srcdir}/doc/xsl/isc-docbook-chunk.xsl -
Bv9ARM-all.html: Bv9ARM-book.xml releaseinfo.xml
expand Bv9ARM-book.xml | \
${XSLTPROC} -o Bv9ARM-all.html ../xsl/isc-docbook-html.xsl -
Bv9ARM.tex: Bv9ARM-book.xml releaseinfo.xml
expand Bv9ARM-book.xml | \
${XSLTPROC} ${top_srcdir}/doc/xsl/pre-latex.xsl - | \
${XSLTPROC} ${top_srcdir}/doc/xsl/isc-docbook-latex.xsl - | \
/usr/bin/perl latex-fixup.pl >$@.tmp
if test -s $@.tmp; then mv $@.tmp $@; else rm -f $@.tmp; exit 1; fi
Bv9ARM.dvi: Bv9ARM.tex releaseinfo.xml
rm -f Bv9ARM-book.aux Bv9ARM-book.dvi Bv9ARM-book.log
${LATEX} '\batchmode\input Bv9ARM.tex' || (rm -f $@ ; exit 1)
${LATEX} '\batchmode\input Bv9ARM.tex' || (rm -f $@ ; exit 1)
${LATEX} '\batchmode\input Bv9ARM.tex' || (rm -f $@ ; exit 1)
Bv9ARM.pdf: Bv9ARM.tex releaseinfo.xml
rm -f Bv9ARM-book.aux Bv9ARM-book.pdf Bv9ARM-book.log
${PDFLATEX} '\batchmode\input Bv9ARM.tex' || (rm -f $@ ; exit 1)
${PDFLATEX} '\batchmode\input Bv9ARM.tex' || (rm -f $@ ; exit 1)
${PDFLATEX} '\batchmode\input Bv9ARM.tex' || (rm -f $@ ; exit 1)
releaseinfo.xml:
echo >$@ '<releaseinfo>BIND Version ${VERSION}</releaseinfo>'
Copyright 2K16 - 2K18 Indonesian Hacker Rulez
;?>)